HT200154 Is the Apple tv light supposed to stay on when my tv is off?
Is there something I need to do to turn the light off? or is it supposed to stay on all the time?
The light is fine. Ignore it.
Similar Messages
-
PLEASE READ:
So my sister spilled some amounts of Powerade onto my HP (Pavilion DV7-3165dx ) laptop (2 years old), it spreaded a little(?)on the keyboard (not sure if it penetrated through?) but we managed to immediately turn it over, turned it off ( It dididn't shut itself off,yet), took the charger off, and then the battery later.
While upside-down, I dried it with a blow dryer for a little while (on cool setting).
Then I let it sit on an upside down V shape for like 2 days with a small fan pointed at it. Then let it sit for another day.
I turned it on yesterday (after inspecting it and everything, I even opened the dvd drive by poking through the hole to open it manually, this is the side where it mostly spilled, I looked at the CD drive and smelled it and saw no trace of Powerade residue, so I assumed the motherboard diidn''t even get wet at all ), everything was working flawlessly...
But I noticed when It's turned off, but has some power source,(such as the battery or the charger plugged in ) the indicator lights (stop,forward,wireless button etc) and the light on the DVD drive would otherwise stay/go on and off (flicker) sometimes and you could open the DVD drive by just pressing the button!
Why is this? It seems the electricity from the charger or battery is somehow powering the lights?
Is this a bad thing?
I've tried power draining (disconnecting every power source and holding down the power button), but it doesn't seem to work?
I've also heard worse post laptop-spill where it resulted on the laptop acting weirdly but after a few days it was gone and working completely ....so is it possible there is still some liquid in there?
-Thank youIt ain't good. The only way to check fully how far the liquid went is to remove the keyboard and look around under it. I think by now it is dry but I worry more about the sugar residue on electronic circuits. Here is a link to the Manual:
http://h10032.www1.hp.com/ctg/Manual/c01859666.pdf
You are out of warranty anyway so it cannot hurt to remove the keyboard. Be careful with the ribbon cables. Remove the keyboard and wipe away any spill residue you see with rubbing alcohol and let dry thoroughly. -
how do you turn off the apple TV box? There doesn't seem to be an off button. The status light stays on.
Usually, when you put it to sleep mode, the status light will turn off. To put it into sleep mode, go to Settings.
If you want it completely off, then I guess the only way to do it is to pull the electric plug. -
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
Why does the apple tv light come on when I'm not using it?
Why does the Apple tv light come on when I am not using it?
my atv1 does that sometimes
I'm 90% sure that it's because it crashed and rebooted
it's basicly a computer and sooner or later a computer will
crash unless rebooted -
I can't get rid of icons in Places -- according to the manual, you're supposed to be able to just drag them off and they go "Pouf!” and disappear. But no...
Just "ctrl" and mouseclick the desired icon and select "Remove from Sidebar" from the little pop up window.. That should do the trick (in your vertical "PLACES" column)
NB: if you want to get rid of icons on the top (horizontal) bar of your finder window, then you need to go to the item with the mouse, press "cmd" ("apple" key) and drag the icon off the finder window onto your desktop and let go (if you want the "Pouf!" effect -
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard
The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ -
I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text fowarded in form of attachment instead of the message opened in the body of the email. How can I solve this? Thanks. Best regards.
this:
Did not exist at the point of delivery to the consumer.
Nor did the white corrosive agent present exist at the point of sale.
" exposure of copper alloys to moisture or salt spray will cause the formation of blue or green salts called verdigris. The presence of verdigris indicates active corrosion."
I see also 2 contact points with DEEP corrosion pitting not indicative of any defect from the factory. -
While doing a non-iTunes upgrade to 8.02 my iPad froze on the apple screen. After hours of waiting I forced a power off. Froze in same place. Tried attaching to iTunes on PC from power off. Freezing in same place. Any ideas on how to get past this so that I can at least run a restore?
I Don't know that recovery mode would work, but did you try it?
If you can't update or restore your iPhone, iPad, or iPod touch
IF that fails, have you considered erasing the device using Find my iPhone in iCloud.com? I'm not sure what good that would do either of the iPad continues to freeze, but if nothing else is working ..... -
Hi, I have the apple tv icon in i Tunes but when I click the icon only a small window comes up with only speaker control, no option of turn mirroring off or on. any ideas?
thats not how airplay mirror works
read this
http://support.apple.com/kb/ht5404 -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
My Ipad won't start up. The apple logo appears and just stays on the screen. after a while it starts blinking every minute
Try recovery mode as described here.
Note you may have to try to enter recovery mode more than one time to succeed.
HT1808 -
I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder? How do I get access to it to install?
Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.
-
I checked the apple tv on my iPad and iPhone but no mirroring on/off toggle appeard. How do I make this work?
I am trying to get mirroring to workTry:
http://www.macworld.com/article/2099925/how-to-stream-ios-audio-to-multiple-airp lay-destinations.html
Maybe you are looking for
-
Motion 5.1 Keyframe problem
After building a 3 minute project with mainly graphics and various moves using a camera in 3D I have found that when I attempt to change a keyframe using the keyframe editor the mouse pointer disappears making it impossible to carry on with the edit.
-
Display thunderbolt alimentation cable problem
Hello I recently met a strange problem with my Thunderbolt screen. I use a Retina MacBook Pro with the supplied adapter to the power cable. Here's the problem: When I plug in my computer, the power supply doesn't connect itself as before. The LED doe
-
Hi how do I set focus on a textfield after i validate the data. If the validation fails, I want to setFocus on the text field that failed validation. Is there a way I can do this.
-
How to record MVG popups in Emprix eTester
We are trying to record the siebel scenario using Empirix (e - Testing suite) We are using Siebel 8.1.1 build BLK_811_10 SIA Following are the steps that we have followed : * Copied the ssdtcorr.dll (siebel correlation liberary) to the e-testing dire
-
I've got an up to date Arch, and interestingly, the following graph does not work in Firefox under Arch but works in Fx under Ubuntu... http://www.slrgear.com/reviews/zproduct - loader.htm when I try to slide the buttons, they won't move. The mouse "