HT200158 Connecting to older SMB servers from Mountain Lion
Lion had depreacated support to older SMB servers. I get following error on trying to do that:
The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.
But I could still connect using the workaround given in the knowledge base article.
sudo sysctl -w net.smb.fs.kern_deprecatePreXPServers=0
HT4697: OS X Lion: Connecting to older SMB servers that do not support UNICODE or NT style commands
http://support.apple.com/kb/HT4697
This does not work in Mountain Lion. I get an error. net:class not implemented. Anybody help?
When I tried sysctl -a | grep smb, I only see following options.
net.smb.fs.version: 107000
net.smb.fs.loglevel: 0
net.smb.fs.kern_deadtimer: 60
net.smb.fs.kern_hard_deadtimer: 600
net.smb.fs.kern_soft_deadtimer: 30
net.smb.fs.tcpsndbuf: 261120
net.smb.fs.tcprcvbuf: 261120
There is no option about net.smb.fs.kern_deprecatePreXPServers.
Found a way for preXP Samba sharing to work.
Download & Install Oracle's Virtual Box.
Setup a Windows XP virtual machine.
(select the appropriate network and sharing settings)
Install Windows XP SP3 onto the virtual machine (you'll need a valid licence key).
And that's it.
I run a virtual box version of Windows XP on Mavericks every time I want to connect to an older Samba share.
It just works.
I have my Mac OS hard drive setup to be shared with the virtual Windows XP machine, so I can drag and drop anything from the Samba share to my Mac hard drive and vice versa, within the emulated windows environment.
I would have loved to run a virtual Snow Leopard instead of Windows XP, but couldn't get it booting correctly, =S. So went with XP instead. Simple, =).
Similar Messages
-
HT200158 Connecting to older SMB servers in Mavericks
Have anyone got this work? I got Thomson router and FAT32 usb-drive connected into it and OS X is Mavericks.
There is a solution for this problem for OS X Lion (OS X Lion: Connecting to older SMB servers that do not support UNICODE or NT style commands), but I don't got it work in Mavericks.Found a way for preXP Samba sharing to work.
Download & Install Oracle's Virtual Box.
Setup a Windows XP virtual machine.
(select the appropriate network and sharing settings)
Install Windows XP SP3 onto the virtual machine (you'll need a valid licence key).
And that's it.
I run a virtual box version of Windows XP on Mavericks every time I want to connect to an older Samba share.
It just works.
I have my Mac OS hard drive setup to be shared with the virtual Windows XP machine, so I can drag and drop anything from the Samba share to my Mac hard drive and vice versa, within the emulated windows environment.
I would have loved to run a virtual Snow Leopard instead of Windows XP, but couldn't get it booting correctly, =S. So went with XP instead. Simple, =). -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5% backupd
5% Mail
5% WindowServer
3% Finder
3% Dropbox
Top Processes by Memory:
1.60 GB mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB Finder
74 MB Mail
49 MB softwareupdated
49 MB Dropbox
Virtual Memory Statistics:
97 MB Free RAM
1.21 GB Active RAM
1.19 GB Inactive RAM
1.21 GB Wired RAM
1.83 GB Page-ins
36 MB Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind. -
can't install from application install dvd and i can't update to 10.6.8 after i restore my macbook pro from mountain lion. when restart and i press command it still has recovery mountain lion show on my screen.
What model is the MBP? Did it come with OS 10.6 or a later OS? Is the install DVD one that came with it or something else?
You can't run an OS older than Mac on it.
But if came with 10.6 installed & you have the system discs, you should be able to erase the drive & reinstall the original OS. -
just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I am about to upgrade my Mac's OS from Mountain Lion to Mavericks. I recently networked to my Mac on our home wireless network an HP 8600 all in one printer/scanner and an HP LaserPro 127. I saw a note posted in a non-Apple forum stating that the Mavericks upgrade should include the drivers needed to run these products on Mavericks. Is that correct or will I need to download a new set of drivers from HP after I upgrade to Mavericks?
Any guidance would be appreciated.Hi mcubed33,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link below for more information:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
Cheers,
- Judy -
After upgrading macbook pro from mountain lion to mavericks computer performance slowdown
after upgrading macbook pro from mountain lion to mavericks computer performance slowdown
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I upgraded to Mountain Lion and very much regret this move. I cannot use Parallels or Bootcamp for Windows XP which I need for some of my 'older' accessories. How do I revert from Mountain Lion back to Snow Leopard? I have the Snow Leopard software but I do not have the original setup software disk that came with the MacBook (leant to a friend and never seen again).
If you do revert to Snow Leopard, be aware of this "feature" I used with my 2009 MacBook Pro:
When it had the original OS (Leopard, I believe) I set up Bootcamp with Windows XP. I also installed Parallels and use the Bootcamp partition for Windows XP within Parallels.
I then upgraded to Snow Leopard and all was fine.
I then upgraded to Lion and still my Bootcamp partition works for Windows XP and also for Parallels.
I have not upgraded to Mountain Lion so I cannot speak to whether or not the Bootcamp paritition of Windows XP will continue to work. If you do and it works, LET US KNOW! -
Cannot connect to app store after downloading mountain lion
cannot connect to app store after installing mountain lion it says there is no network connection when there clearly is i am on the internet now and i had this problem with the bootcamp server i read that in another forum and the answer to remove the auto proxy setting was correct but not for this situation because it is allready unchecked i checked it and tried again still no connection please help .... oh and apple you are beginging to be more like windows/microsoft with all the problems
That poor wordpress site has collapsed in exaustion from trying to keep up with the 3mil hits a day
here is a "copied" version with credits for those looking for a solution to an annoying problem Apple should patch. (Yes, I'm aware of the irony of that statement)
July 18, 2012 · by Arthur Lockman · in Apple, Tutorials
After doing a reinstall of Lion a few weeks ago, I found that my computer suddenly would reject every VeriSign certificate that it encountered. Using Chrome, that meant that I couldn’t even access Twitter.com, because it thought that the certificate was wrong. I couldn’t login to the Apple developer portal, I couldn’t authenticate a device with XCode, I couldn’t make a purchase at Apple.com, I couldn’t download updates from the Mac App Store, and I couldn’t login to Mint.com, among other sites. I essentially couldn’t do anything that used a VeriSign certificate for SSL.
What did I do? I called my trusty AppleCare advisor, hoping for an answer. I thought that maybe they could help me figure it out. After getting to senior support, I was told to reinstall Lion, which I did to no avail. My case was then forwarded to the Apple engineering team, with 3 to 5 days to wait until I had an answer. I looked around, through my console logs and through Keychain access, and finally came up with an answer, and a solution to my problems.
It turned out that my solution was pretty simple. I had to delete a few files and reset one to its default setting.
Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
Restart your system.
This solution seemed to work just fine for me. All of my certificate problems have been fixed. It must be something with the OSX installer that causes this certificate issue. I’ll file a bug report. Hopefully someone looks into it and fixes the flaw in the OS. And, I hope that this fixed the flaw for you.
Addendum – a note on security:
This procedure won’t affect the security of your Mac. I’ve had some questions come in about that, and if anything, it makes it more secure because then sites that require SSL certificates can actually use them, unlike before where they might default to non secure connections because the certificate was bad. -
Downgrading from Mavericks to Mountain Lion WITHOUT time machine backup from Mountain Lion.
Hello. I'm one of the unlucky owners of Macbook Retina 15" Mid 2012. I was very satisfied with this computer, everything was great, untill I installed OS X Mavericks. My computer started to have GPU Panics all the time under some "heavier" usage like watching long videos on YouTube. I googled this problem and then I saw that I wasn't the only one, many people had problems after upgrading to Mavericks. I also read that downgrading to Mountain Lion solves the problem, but after the Internet Recovery update, when you are restoring your mac, it restores as Mavericks. I read Apple instruction how to revert os x, but it requires Time Machine backup from Mountain Lion, I already downloaded ML Installer from AppStore but I don't know how to install it.
Greetings,
MdknIf you have a Mountain Lion installer application then you can downgrade, but you will have to erase the drive. You should try backing up your Home folder in advance so you could at least restore your data. You will need to reinstall any third-party applications.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Wait for the process to complete which will take quite some time.
Use your new installer flash drive to boot the computer. Boot by doing:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for the USB flash drive.
5. Click on the arrow button below the icon.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
You will need an active Internet connection. -
Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210
How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!
Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like: -
Hi, can anybody help me please, i have upgraded from Mountain Lion to Mavericks, since then my Adobe flash player don't want to work.
I clicked on update and downloaded the update from Adobe and installed it.
Every time i get an error saying - "that this wasn't downloaded from App Store".
i can not find it in App Store.
What must i do?Try this: in your Utilities folder launch Adobe Flash Player Install Manager and run it to completely uninstall Flash. Then go to http://get.adobe.com/flashplayer/ and download Flash
Once downloaded, double-click to open it and run the installer. If you get a message saying the file can't be opened, or similar, Control+click or right click and select 'open' and should then be able to proceed to install it. -
I am upgrading from Mountain Lion to Mavericks. I tried to install Mavericks from the AppStore, everything went OK (download, etc), until the system had to reboot and it was when everything failed. The system couldn't start, it stalled when the apple logo appeared, but the mouse was resposive (really weird). I tried several things cleaning the PRAM, etc, and there was no booting, or alternative to start the system. After trying all the different combinations to boot and see no change, I realised that the left option key somehow was unresposive at startup, and that was one of the identified problems. However, I manage to use the right option key and I was be able to boot from an external hardrive using a recovery partition from a clone of my system. I restored the system with my back-up from Time Machine of 10.8.5. I have a mid 2010 MacBook Pro, where I have a SSD drive. My drive is OK and It was checked prior to installation of the system etc. Any Ideas on how to able to install 10.9, or an expected release date of a new installer? It seems this has been happening to a lot of people.
OK,
I did the following (I did not purchase DiskWarrior or any other 3rd Party software)
Backed up to an Time Machine Drive
Reset the EPROM (zapped it or whatever they kids these days are calling it)
Booted off a Mavericks USB stick.
Ran Repair Disk & Repair Permissions
Installed Mavericks
Worked fine, took a while but up and running.
Not sure what the HD damage error was but it's working away on my old work horse (17" Late 2007 MacBook Pro).
Eoin
<Apologies for post the same response in two place but I had made a comment here and was following another thread, Good Luck!) -
Smooth transition from Mountain Lion Server to Mavericks Server 3.0!!
After an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob BlomeyerAfter an new OS release that are always complaints about installation and configuration problems. First comers to using any new software tool provide valuable feedback we generally hope will help improve the new product. It's how things have worked since the first 6503 Apple II's and 8086 IBM PC's.
I've been using and upgrading PC's since THOSE DINOSAURS! And I can't remember EVER having an OS upgrade go as smoothly as my recent upgrade from Mountain Lion Server (OS X 10.8.5 w. Server 2.2.2) to Mavericks Server 3.0.
I chose to do a clean Mavericks install on a clean partition created on a 1 TB disk that was upgraded into my trusty MacBook. I used the DiskmakerX app to create a Mavericks installation USB drive. When the screen came up with the option to import users, programs & files (took a pass on email) from the Mountain Lion Server partition, I let it run overnight to transpose everything of value into the clean Mavericks installation.
The next morning the only program that wasn't PERFECTLY installed and configured on Mavericks was Server 2.2.2. I deleted it and bought/installed Server 3.0. After Server 3.0's setup ran that only thing I had to do manually was start Postgres! My domain setting, DNS, all my web applications that were set up on Mountain Lion Server were all GOOD TO GO again on Mavericks Server!
I'm disclosing this here, publicly because it was a BIG PAIN to install and deploy all my websites using Mountain Lion's server app. To say the easy transposition into Server 3.0 was an unexpected and pleasant surprise amounts to massive understatement.
Now I'm going to describe two small anomolies I've noticed in either Mavericks or Server 3.0 that other users might want to be on the lookout for. They're not fatal. But they might be "habringers" suggesting underlying problems in either the new OS or the new Server's internals.
The toolbar icon for TimeMachine doesn't "spin" when it backs up. It's not a big deal. But it's convenient to see the circle around the clock whirling so we know when TIme Machine is backing up.
Mavericks Server isn't reporting newly upgraded apps as available under the Updates Tab of the Server's Software Updates subsystem. It might be inconsequential. But with a new OS version it never hurts to let the developers know about the "little things" that don't apparently work.
Kudos to the Maverick's developers for releasing an OS X version that's THIS CLEAN. And hugs to Apple's management for making it a free download upgrade for developers!!!
Full disclosue: I don't now and never have worked for Apple. but I do own a few shares of Apple stock that we purchased many years ago at $14.00 / share. I'm not a big shareholder. But based on my recent seamless upgrades to Mavericks and iIOS 7, I'm a happy one who's not likely to sell any time soon.
If Apple can do for ALL THEIR HARDWARE AND SOFTWARE PRODUCTS what they seem to have done for OS X and iOS, they've got at least a fighting chance to recover from their losses after their stock peaked at about $700.00 /share.
Keep up the good work!
Dr. Bob Blomeyer
Maybe you are looking for
-
Organizer for PE8 updating photos on it's own?
I was a bit alarmed this evening to notice that my 5+ years of photos stored on my NAS drive suddenly have had their "date created" and "date modified" time stamps set to the dates from the past 10 days or so. The first thing that jumped into my min
-
I am trying to set up Pogoplug Series4 as a NAS attached to my Time Machine router. The TM does not appear as a drive in the Finder and I cannot locate it to assign ports to the PP device. Running 10.7 on an iMac. Time Machine and Time Capsule work f
-
HT200126 Tv device is turned off and won't work its on but it shows the iTunes logo with no movement
The apple tv is closed but wont show any thing expect a logo of Apple iTunes we know it wants a restart but the restart won't work
-
Balance matching with AR03 & F.01 ?
Hi, All Experts, I am trying to tally AR03 and F.01 for balances. My base is F.01 for further cross verification to other reports. But it is not matching as previous years close is not next years opening. Can anyone tell me what may be the reasons fo
-
Does anyone know how I can set up pre-programmed text messages?