HT200189 VPN server update actually did not solve my issue on 10.9.1 using Server 3.0.2

The aforementioned fix actually did not solve my issue on 10.9.1 using Server 3.0.2. Any other suggestions? I also see that the VPN service cannot be shut down. After sliding to off, it gives no message and automatically slides to On again...

In my case I managed to fix it by means of this article:
http://jonsview.com/how-to-setup-os-x-10-9-as-a-l2tp-vpn-server-without-apples-s erver-app
And then especially the part about using an old version of Racoon (from Mountain Lion for example) to replace the current apparent defunct one in Mavericks...

Similar Messages

IOS Update did not solve syncing issue

I'm still having problems with my playlists and art cover on my iPad 2 and my iPhone 4. On my iPad I can't see most of the artwork, but all playlists sync just fine. On my iPhone, artwork syncs just fine, but I can't find iTunes playlists (Top 25, Recently added, etc.). I'm running itunes 10.6.3 on my Mac, iOS 5.1.1 on iPad and iPhone.

In my case I managed to fix it by means of this article:
http://jonsview.com/how-to-setup-os-x-10-9-as-a-l2tp-vpn-server-without-apples-s erver-app
And then especially the part about using an old version of Racoon (from Mountain Lion for example) to replace the current apparent defunct one in Mavericks...

Overheating and Draining: The iPhone iOS 6.1.1 did NOT solve the issues of 6.1

Apple released the iOS 6.1.1 yesterday in an attempt to patch the faulty script that is causing iPhone 4S users' batteries to overheat and drain at 3X-4X the normal rate.
I have a Verizon iPhone 4S and the iOS 6.1.1 patch did NOT work. Today, I watched my battery life go from 100% (cycle charge with top off) to 10% in 6 hours. Like many of you, I use all the tips and tricks such as:
Fetch mail instead of push
No location based iAds
Siri not activated upon handset pickup
Minimal notification center alerts (only a few that I need)
Low brightness with auto setting
I hope Apple can fix this as soon as possible- this is causing irreparable damage to my battery in the interim until the software is coded correctly.

@deggie
Does this involve Gmail Exchange accounts? Or just Microsoft Exchange accounts?
I use the exchange version for my gmail account on my iPhone 4S so I was just curious. I have actually gotten better battery life since updating to iOS 6.1 and haven't notice a difference since updating to iOS 6.1.1, but that was last night so it may be to early to tell. I did leave my phone unplugged last night and it had only drained from 100% to 90% after 7 hours sitting on my nightstand turned on but locked.
I think there is a correlation between updating Over The Air rather than through iTunes and the battery life issue. Most of the battery issue stories I have read were from people that updated OTA. I have always done my updates through iTunes and have only once had a problem with my battery, but a full cycle drain and recharge fixed it.

Still Image Interlacing (Search did not solve my issue)

As I stated in the topic title, the search items for (still image interlacing) did not help with my problem. I'm trying to animate a bunch of stills for a slide show. The one thing I read over and over was that the pictures should be bigger than the viewer size in FCE.
I'm set for NTSC DV so 720 x 480, and the pictures are in the thousand pixel range (something like 2000 x 3000, high quality photos). I still get the interlacing. I read Tom Wolsky's FCP book entry however it did not help with the interlacing issue. If I do a batch edit in photoshop and change all the pictures to 720 x 480, would this solve the issue? I'm sure many of you have had this problem before, as I have, please let me know what you did.
what confuses me most is that it only happens with some pictures. I duplicated the animation and all the pictures are from the same camera, same SD chip and same size so I'm truly baffled by this. Please help me out, thanks.

It's true that stills should be bigger than the video format,
if you are moving them around and resizing them.
That won't affect the interlacing, but at least you won't
see the pixels from the still.
While doing motion and resizing, however, it's usually best to work
in a progressive format. In fact, it would be best if you
could stay progressive to the end. What format will
your final master be?
If your final deliverable is supposed to be interlaced,
you will usually see interlacing artifacts on a computer. But that's
not necessarily bad. When played on a regular analog TV,
the interlacing will function correctly and you won't notice it.
Are you really producing something for NTSC analog TV?

Downloading new firmware version still did not solve connection issue!

I was told my support on live chat to try downloading the newest version of the firmware for my wireless router WRT54G. I had 3.something from 2004.
I now have 4.21.1 and I STILL cannot see my router in my View Available Wireless Networks list. I see my neighbors' connections, but I want mine.
Has anyone found a solution to this yet...Downloading the latest firmware seems useless.
I am now wired in, but not what I wanted

did you reset the router after the firmware upgrade ?? if not , reset the router for 30 seconds..do a power cycle and then reconfigure it ..

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do?

I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks

Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

Wifi problem did not solve!

Hey guys ! After the update if ios6.0.1 ! My wifi still did not solve! It does not connect when it in lock screen mode. It will auto connect back after I unlock my screen! Anyone have the same problem with me? Any solution to contact apple or a solution for me? Thanks!

This is the way iOS is designed to work.
There is no issue.
Wi-Fi turns off in sleep mode to save battery life. Wi-Fi will stay on in sleep mode if the device is plugged into external power.

10.5.3 did NOT solve the Bluetooth smartphone incompatibility

I'm sad to report that the 10.5.3 update did not solve the problem of getting certain smartphones, such as the Nokia N73, to pair up with a Mac and be able to sync the Addressbook and iCal. For that phone (and probably others), this is quite awkward, since it is the only way to sync data from those two applications; you can't do it via the phone's USB cable.
10.5.4, maybe? Or is this some dark plot to get everyone to purchase an iPhone?

Could you elaborate on the specific settings and actions for this? I've never been able to do this successfully via de USB cable and I was under the impression of having read somewhere that iSync did not support this mode for the N73.
You are right, it seems to be directly related to the latest firmware from Nokia. According to what I've seen, the problem lies in getting the two devices to pair, which never concludes correctly, so I will try one last and desperate measure: pair it up with my old PBG4 that has the latest flavor of Tiger, then migrate everything with Migration Assistant to a testbench Leopard system I have on an external FW drive. If the pairing gets migrated over and continues to work, I'll only have to figure out which specific files contain the pairing info.

TS4510 Updating to the latest iOS on my iphone 5 did not resolve this issue, I have had to switch it off

Updating to the latest iOS on my iphone 5 did not resolve this issue, the only way I've found round it is to switch the mode off

Do Not Disturb mode stays on after scheduled time

Downgrading to 7.0.1 did not solve the white screen issue.

Hello -
A little background - in early January, with a thesis presentation due, I delayed upgrading to Quicktime 7.0.4 until after the thesis - this was a good idea, because now after upgrading and downgrading again, I've got problems.
I made a video with Final Cut Pro - (assume I can no longer go back and output it again) and have the file as a .mov. Before upgrading, thesis era, I threw it into iDVD and got a DVD.
NOW I need to make more copies of the DVD so I go about re-creating the dvd in iDVD with the exact same files... and the video comes up blank. both in quicktime AND in iDVD.
I downgraded from 7.0.4 to 7.0.1 - but that did not solve the problem completely... sure, I get my audio back now, but the film is entirely white-screen...
I'm under a massive time deadline to make more copies of the DVD and I'm at a loss os what to do! Please help!!
I'm already deleted the receipts, downgraded from 7.0.4 -> 7.0.1... no fix.
tried going back to 7.0.3 from 7.0.1... no fix.
went BACK to 7.0.1 again.... no fix...
HELP!!!! t
thanks

There's a good chance that you're doing something unusual and risky with JavaScript. For us to figure out the problem you would need to allow us to use your web app and tell us where it is.
Given the tags you're using you understand tech talk and rathr than posting to 'iPad in Business and Education' you're better off posting in a developer forum. You could try the public one that's part of this list
https://discussions.apple.com/community/developer_forums
or the more private ones which are part of developer.apple.com, for which you need a developer account.

Can Firefox be set to a default zoom that doesn't change back to small each time a new website is accessed? Downloaded add-on did not solve

I have a new iMac with a large 27" monitor. I'd like to set a 225% default zoom on Firefox-- currently, each newly accessed website must be manually enlarged because the 225% size won't remain the default size for all websites; this is very frustrating. NoSquint add-on did not solve this problem for me. Am I doing something wrong?
I'd greatly appreciate any help you could provide because I've had to switch to Safari for web browsing and I much prefer Firefox.
Thank you

Hi palmetto2008, 
check this article: [[Font size and zoom - increase the size of web pages]]
 
Shortly, you can configure Firefox to display all text at a minimum font size. If a web page contains text that is smaller than your defined minimum size, Firefox increases the font size of the text to this minimum. To set a minimum text size:
* On the menu bar, click on the Firefox menu and select Preferences...
* Select the Content panel.
* In the Fonts & Colors pane, click Advanced....
* In the Minimum Font Size drop-down, select the minimum size in pixels in which all text must be displayed.
 
Regarding NoSquint addon, you should be able to override the default zoom options and keep your settings between Firefox restarts. 
See also here: [https://urandom.ca/nosquint/help.php NoSquint Help Page]
 
Apparently, there are many addons offering your desired feature like:
* Default FullZoom Level
* Zoom Page
 
Hope that helped you! Please report back!

For about 1 week Iphone 5 looses time. Have to restart to correct time. Usually looses up to 15 min. Did update but did not fix problem.

For about a week now my iPhone 5 has started loosing time. I have done updates but did not fix problem. Have to restart phone for it to correct itself.

Have you tried resetting the network settings? Go to settings, general, reset, reset network settings.

Since updating to iOS5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to restore this feature.

Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.

There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8

TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

HT200189 VPN server update actually did not solve my issue on 10.9.1 using Server 3.0.2

Similar Messages

Maybe you are looking for