HT200197 My Apple TV not working properly. I can't access my photos and it shuts down.

Don't know how to get help. My Apple TV all of a sudden isn't working properly. It goes to load my library from itunes and takes a very long time to do so. When it finally stops and I click on slideshow it just goes back to the main screen. Help!

In iTunes switch to Song view and enable the iCloud Status column by pulling down View > View Options and selecting the "iCloud Status" option. Close the small window. Now click the column to sort on it and see what the status is for all the music that is not showing up on your iPhone 5. Post back and let us know.

Similar Messages

  • My iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    my iphone fall in the sea and now it's not working how i can take off my photo and numbers ? and do u thing it will be work or what plz help me !!!!!!!!!!!!!!!

    Sea water and electronics don't mix.  The salinity fries the internal circuitry of the phone. Your phone is toast.
    Certainly the user of any device which can be lost, stolen, or dropped in the sea would be smart enough to have had the data backed up, rght?  Your photos and numbers should be safely backed up on your computer or in the cloud.
    If you didn't do this, there's no way to recover those data now.  Backups are meant to be done BEFORE disaster strikes, not after.

  • Thanks TD it worked ! I can now access my photos and library.

    Thanks TD It worked! I can now access my photos and library.

    If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Follow the instructions for putting the device in recovery mode >  iPhone and iPod touch: Unable to update or restore
    That restores the iPod to factory settings.
    Will my iTunes library be effected?
    It will be deleted from the iPod touch.
    If you are a resident of the U.S. have iTunes 10.3 or later, iOS 4.3.3, you re download iTunes purchases for free.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing it again on my new computer?

    I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

    I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
    Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

  • Apple keyboard not working properly

    I have had owned this wireless keyboard for over a year now. It has been working fine up into like 3 days ago when all of a sudden certain keys where not working properly. I disconnected the keyboard and tried pairing but it is not allowing for the pairing to go through. I also tried it on my ipad same keys where not working properly. Nothing was spilt on it. It just stop working right any suggestions

    Gabor-
    Try resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will probably need to re-pair Bluetooth with your keyboard and reconnect your WiFi.
    If that doesn't help, try resetting the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting doesn't hurt anything, and sometimes corrects mysterious problems.
    Fred

  • I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly.  This problem occurs after each and every missed call.

    I'm using iphone 5s with ios 7.1.2  & I am facing a new problem after every missed call. i phone  gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its  irritating to reboot the phone frequently after each issue....

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • Recently Image Capture does not work.  It can't find one camera and can't find the images from another camera.  Help?

    Recently Image Capture stopped working.  It can't find one camera and can't find the images from a different camera.  Help?

    Launch iPhoto. From the menu: iPhoto>Preferences>General: Select Connecting camera opens>Image Capture.

  • Please help...  GiO not working properly with Mainstage.  GiO lights errors, and Gio Disconnected errors.

    I have a gig ion 11/22, and I am DESPERATE TO FIX THIS....
    Mainstage 3
    Brand new Macbook air
    Brand new Apogee Gio
    I've tried multiple reloads of the software
    2 macbook air 13"
    and 6 GiOs.
    These things aren't talking to each other.
    I bought the laptop SOLELY to run mainstage.  No other garbage is cluttering the box.
    I have 1 concert file, with 50 songs (Patches)
    Each patch has a few pedals configured on the layout screen, which are linked to the Pedalboard in Mainstage for various effects
    AT MOST, I have 1-2 channel strips PER PATCH...  Nothing seriously tasking on the CPU.
    THe CPU meter shows <20% capacity, always.  Usually <10%
    A few of the patches have a channel strip with a 3 second .wav file (audio channel strip)  NOTHING HUGE AT ALL.
    Problems scenarios:
    1.  MAINSTAGE FREEZES ON LOAD = 3% of the time....  
    Mainstage freezes at starup..  Jams on the "loading MIDI" message.  happens 3% of the time.
    2. MAINSTAGE reports "GiO has been disconnected" = 100% of the time...  
    I can sometimes play for 1 hour, no issues.... then all of the sudden, I hit a Gio Button, and i get the "Gio has been disconnected" message. I cannot play a gig, without this failing...    I have to REBOOT mainstage to get the stuff talking again, sometimes I have to RESET the Gio too (by holding a button and pulling/attaching the USB)  Sometimes Mainstage reconnects itself to Gio, most times I have to reboot everything.
    3.  GiO LIGHTS MALFUNCTIONING. = 80% of the time.
    Sometimes while I'm playing, the lights on the Gio fail to cycle when I press the buttons...  The lights on the MAINSTAGE screen layout behaive correctly, and the audio output is modified correctly when the buttons are pushed.... but the Gio foot switch lights fail to cycle.  For a particular song/patch, sometimes they work, other times they wont.
    I've had Apogee tech support working on this to no avail.
    They told me to unplug other usb devices.
    Try new cables.
    Increase the buffer size to 256 from 128 (which i did, but the latency/delay is unacceptable, and the problem still persisted anyway.)

    Super,
    I have a new Macbook Pro with Retina and an Apogee Gio and use Mainstage 3 under Mavericks (OS X 10.9.1).  I am experiencing similar problems to yours so I do not believe it is a problem with your particular machine or set up.  I have been using Mainstage and the Gio for a few years under Snow Leopard and Mainstage 2 without these particular issues.
    I am having the same hang on 'waiting for midi' at startup when the Gio is plugged into the USB port.   This seems to be occurring more and more.  I tried both ports on the Macbook Pro and it occurs on both of them sporadically.  I would say maybe 10% of the time.   I have discovered if you unplug the Gio usb cable at this point and plug it back in it will allow sometimes allow Mainstage to finish booting up. 
    The Gio is disconnected message I only had one time.  Only appeared the very first time I was using it on my new system.  I believe this was under Mavericks 10.9 (not 10.9.1).  I haven't been getting that message since.
    The Lights on the Gio hardware unit and Mainstage do not appear to be working properly here as well.  They seem to work properly for a while but then they lose sync with the templates.  I initially thought this might be caused by my particular custom template.   I tested today using the stock Gio Mainstage template from Apogee and the lights begin to lose sync on the Gio.  Buttons mapped to various pedals or amp settings on the Gio will sometimes stay on when they are supposed to go off or visa versa.  Using the looping functions the various foot pedal buttons sometimes display incorrectly (on when they are supposed to be off). 
    I believe the problems are  with Apogee's Gio driver or a software issue with Mavericks.
    I have filled out a feedback form to report this to Apple.  I would recommend you do this as well so they know it is an issue.  http://www.apple.com/feedback/
    I would also contact Apogee and see if they have an updated driver coming soon or if they have any other recommendations.
    If you resolve this issue or hear anything, please post.  Thanks.

  • My messenger not working properly on my iPhone 6 freezes completely and I miss all my texts just not working. anyone else having this issue?

    I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
    Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
    Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
    This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?

    It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol    If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.

  • I sync my firefox but it does not work properly i have to enter password again and again what should i do?

    i sync my Firefox
    i have using i very well but now it creates problem
    my Firefox i synchronized but i have to enter password for login again and again what should i do
    what will happen if i click on reset sync in options ,will i lose my all data

    Yes, you will lose all your data stored on the sync server if you reset the sync (recovery) key.
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    Is the password manager working properly?
    You can find the sync password and the sync key in the password manager on the computer where you originally created that sync account (email).
    *Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)

  • Why won't the Camera and Photos apps work? I can't access my photos or take new ones.

    I can no longer take new photos, or access my camera roll or photo stream from within the camera or photos apps.
    Several days ago I took an HDR photo and the phone became unresponsive on the "saving" dialog with the progress loop rolling. After 15 minutes, and multiple attempts at getting it un-hung, I forced a restart of the phone. Since then, whenever I take a picture, the app disappears and drops me on the home screen right after the "iris" graphic clicks on the screen. The same app crash happens when I simply try to look at previously saved pictures in either the camera or photos apps. Since then I have synched the phone, and performed a factory reset, and neither has fixed the problem. Has anyone else experienced this? How do I get use of my camera back?

    I'm having the same problem, but am traveling for business right now so all I can do is restart the phone.  I don't live near an Apple store either, so I don't know how I'll get it fixed.  Any suggestions would be appreciated!

  • When I updated to ios 5 I was forced to create a new Apple ID. Now my iTunes sync does not work properly.  Why did it do this and is there a way to fix it?

    I already had an iTunes account when I pushed the iPhone.  After upgrading the OS to 5.0.1, I kept receiving an error message saying that my AppleID was invalid, even though it worked perfectly within iTunes on my PC.  It seemed to want my email address as my "new" AppleID so I entered that, but it created a second ID. It seems my cloud account and the "phone" iTunes is attached to the newer ID and my "PC" iTunes account is attached to the older ID.
    Now, when I try to sync iTunes, I don't see all of the songs I purchased, some sync and others appear to sync but are grayed out with the sync icon next to the title. The songs are still on my phone, but not in my iTunes library. 
    Is there any way to fix this and consolidate the accounts? Also, why did the upgrade force me to create a new AppleID? I haven't upgraded to the 4 or 5 phone because I'm afraid this is going to happen again and I'll have a third AppleID to contend with.
    Thanks!!

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

  • Unlocked IPhone 4 from Apple is not working properly on Rogers

    I bought IPhone 4 bacjk in May 2011 from Apple was Unlocked. I am using it on Rogers. Since I have updated to IOS 5.0. I am having a weared problem. I daily commute to downtown Toronto using Subway. When I come to Street level and waited for sometimes 2 hours My phone says searching or no signals. I have tried everything per Rogers It is a hardware issue so Apple swopped my phone 3 times. I have changed my SIM card two times. No luck. I have tried enabling 3G on or Off or aeroplane mode On & Off as well. Evertime I need to swicth my phone Off and On to get back to Network. Yeaterday I was at Rogers store they told me because I have bought it unlocked from Apple it did not have the settings and Rogers software on it that might be causing the issue. Any help on this will be appreciated...

    http://discussions.apple.com/thread.jspa?messageID=12241341#12241341

Maybe you are looking for

  • How to delete duplicate value in movement type 541 & 542(alv report)

    hi experts, i have some problem in alv report, input we can give some movement type for ex(101,102,541,542, etc) how to delete duplicate value in 541 and 542. regards gunasekaran.

  • With the new FCPX 10.1, my external hard drive is not being recognized.

    Today I updated my FCPX application to 10.1, but when I plugged in my 'passport for mac' (which has all my important 500 GB projects on it) It does not come up like it used to. I have tried to import the files as libraries, but either it doesnt work,

  • Using Jsp to create a crystal report

    Hi, I am using Jsp to create a crystal report from an oracle database.To create a new report document,i am using the ReportClientDocument class in the "com.crystaldecisions.sdk.occa.report.application.ReportClientDocument " package. I am using this c

  • Advantages of  Upgrading  Weblogic 8.1 sp5 to 10.3

    Hi I am very much novice to the weblogic.We are planning to upgrade the weblogic 8.1sp5 version to 10.3.We need to convince the clients regarding certain issues with respect ti the upgrade.Say performance, what are the performance advantages of upgra

  • Cannot access photo library

    I have a new iPad3g which I have synced to my iMac G5. I have elected to sync photos from my Aperture. When I touch the photo icon I get the message "Please Wait Updating Library" accompanied by the spinning wheel. The problems is it never updates an