HT200241 Is their a way to cache the ios8 file when using the apple configurator to load MDM on ios devices iphones/ipods

I am loading mobile iron mdm solution on my devices and the configurator is checking and installing ios8 on devices even if they are already up to date and its taking 30 minutes per device. Is their a way to cache the ios8 file so this process is shortened?

I'm not gonna do a complete reset because I shouldn't have to . Apple put out a very buggy update .
I am not ranting about your suggestion , which is fine , but these are ridiculous issues for an operating system that been out for years .

Similar Messages

Can the "Apple iPad Keyboard Dock" unlock an iOS device?

I have a iOS device where the touch screen isn't working any more after some water damage, and even replacing the front display doesn't help. It's apparently a problem on the circuitboard that I cannot get fixed.
I only need to be able to unlock it so that I can connect it to iTunes and back it up, so I wonder if this "Apple iPad Keyboard Dock" can be used to unlock the device.
Does someone own this keyboard and could try this? Can you unlock the iPad or iPhone and enter a passcode after pressing the wake button, without having the swipe on the screen?

No. The iPad Keyboard Dock connects to the iPad through 30 pin connector on the iPad. Your PC wouldn't have that connector.
Instead, you should just get a USB keyboard, which basic models are often just $20.

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

HT1414 I restored my ipod, and when i click on back up, it asks me for a password and i forgot that password. Is their any way to reset the password? I need that back up immediately!

My little sister restore my ipod 5th generation and i want to restore from my last back up. It says, "Enter the password to unlock ipod touch back up". I forgot the password. Is their a way of reseting the password or taking it off?? Please help. (im doing this form my imac)

Either:
- Do not restore form that backup
- Copy the backup file to PC and "crack" the password. and then use that password to restor on your Mac.
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press theReturn key.

Is their a way to activate the "find my iphone" app with out having the iphone with you

is their a way to activate the "find my iphone" app with out having the iphone with you

how do i activate the lost mode on my "find my iphone" app without reporting it lost? What do i have to do to activate this app prior to any loss? [email protected] Thanks, JN

Hello!, Is their a way to make the slideshow Random or shuffled?

Hello!, Is their a way to make the slideshow Random or shuffled?
If their something like script or plugin for bridge that will allow me to do random slideshow pls help me tahnk you

Slideshow follows the current sorting order, you can adjust sort setting to change slideshow order. But there's not a "Random" one.
Thanks,
Bridge QE
Fran

Is their a way to adjust the input for the built in microphone for my iPad?

Is their a way to adjust the input for the built in microphone for my iPad? What it is recording is so quiet I can barely hear anything when it plays.
Output works fine with videos and music, but not when I record something.
The sound is all the way up during the recording and during playback.

Hi!
Generarly speaking you can't but some apps have that build-it to them. For your sound issues I recommend checking app settings.
There have been reports that some iPads had defective or disconnected microphones. You may need to show it to an Apple Store Genius. If they agree it is bad, you may get a new iPad on the spot.
If there is no Apple Store near you, search for an Apple Authorized Repair Center. There may be one in your city. In the US, <United States>. Outside the US, <http://support.apple.com/kb/ht1434>.
Vid

Is their a way to keep my app private once approved from apple?

Is their a way to keep my app private once approved from apple? I would like it to be available and viewed only by company employees...
Thank you

There is an option called restricted distribution which is available for DPS Enterprise Customers if you wish to use restricted access via Apple App store. Go though the following article to know more : http://www.adobe.com/devnet/digitalpublishingsuite/articles/restricted-distribution-with-d igital-publishing-suite.html
You can also create Enterprise Signed Builds using DPS Enterprise License to distribute content directly to company employees without going though Apple App Store. You can choose which ever option is best for you.

When using an Apple TV, any new device that logs on immediately takes over the display. Is there any way to prevent this and maintain the control from a designated device?

I would like to designate a single device to control the Apple TV, but anytime another device enters and logs on it takes over the display and whatever is on that screne appears. Is there a way to set the Apple TV so this does not happen?

Glen beck is a conservative news commentator , he now has a tv Chanel broadcasted only by the Internet, is is GBTV I get it on ROKU. I cannot get that or FOX NEWS or CNET on my new apple TV. Love the new device with the exception of my missing networks. By the way, thanks for the remote advice it works great.

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output?

Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?

Hi and welcome to Discussions,
have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
Regards
Stefan

Is there a way to delete the Apple ID on one device (IPhone 5) and replace the ID on that device with an existing ID used on three other devices?

Is there a way to delete the Apple ID used on one device (IPhone5) and replace it with another ID that is being used on three other devices?

If you have turned on Settings > iCloud > Find My you will have to start by turning that off - requires entering the Apple ID password. Then remove the Apple ID from all places it is used, i.e., Messages, FaceTime, and so on. Go to the App Store and then Sign Out. Now you can enter the desired Apple ID and password in all of those places.

Is there a way to have the calender results in a global search on an iPhone to appear in reverse cronological order?

Is there a way to have the calender results in a global search on an iPhone to appear in reverse cronological order?

I guess not... (at least not on 5.x!!). I would just like the calendar search to return results in chronological order of any sort. With iCloud calendars and OS 5.1.1 it lists all the results (by date order) for one calendar, and then does all the results for the other one, which is a bit tiresome. Strangely it all works fine with Google calendars... But maybe I will just use spotlight search to get round this problem for now.

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

Just to make sure, try a different set of cables. If the problem persists, have the unit replaced by Apple.

HT4436 is there a way to change the apple ID on an Icloud account? I used to share everything with my daughter but she's old enough we need to separate the accounts.. I would like to "give" the ICloud account to her, because all of her games are on it.

Is there a way to change the apple ID on an Icloud account? I would like to "give" an ICloud account to my daughter. We used to share one, but she's getting older I would like to split our accounts. She has her own Apple ID but since all her games are on this ICloud account, I would like to give it to her and start my own.

You can migrate your device and a copy of the iCloud data to a new account. To do this, start by saving any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll. If you are syncing notes with iCloud, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your daughter's device won't be effected by this), choose Keep on My iPad and provide the password when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload the data.
Once you are on separate accounts you can each go to icloud.com and delete the other person's data from your account.
The existing iCloud email account cannot be moved to your new account so you will need to give your contacts your new email address if you are giving the account to your daughter.

What is the best way to display errors to users when using JSPs?

          Hello,
          Could someone suggest me the best way to display errors to users when using JSPs?
          Many thanks in advance.
          Rino


          Thanks for the code snippet!
          Rino
          "Deepak Vohra" <[email protected]> wrote:
          >
          >
          >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
          >exceptions
          >to an error processing page. For example:
          >
          ><%@ page errorPage="error.jsp" %>
          >
          >redirects the browser to the JSP page error.jsp if an uncaught exception
          >is encountered.
          >
          >
          >Within error.jsp, indicate that it is an error-processing page, via the
          >directive:
          >
          >
          >
          ><%@ page isErrorPage="true" %>
          >
          >The Throwable object describing the exception may be accessed within
          >the error
          >page via the 'exception' implicit object.
          >
          >
          ><% if (exception != null) { %>
          ><p> An exception was thrown: <b> <%= exception %>
          >
          ><p> With the following stack trace:
          ><pre>
          >
          ><%
          > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
          > exception.printStackTrace(new PrintStream(ostr));
          > out.print(ostr);
          >%>
          ></pre>
          >
          >
          >
          >"Rino Srivastava" <[email protected]> wrote:
          >>
          >>Hello,
          >>
          >>Could someone suggest me the best way to display errors to users when
          >>using JSPs?
          >>
          >>Many thanks in advance.
          >>
          >>Rino
          >

HT200241 Is their a way to cache the ios8 file when using the apple configurator to load MDM on ios devices iphones/ipods

Similar Messages

Maybe you are looking for