HT200261 Configurator Error. Apple Configurator could not open your library.The file couldn't be opened because it isn't in the correct format.

I was using configurator without trouble. Unfortunately, my battery died and my computer went down. I plugged my computer in, restarted it and tried to open configurator. Now this is the error I am getting. Apple Configurator could not open your library.The file couldn’t be opened because it isn’t in the correct format. How do I fix this?

Thank you for responding. The number 2 after the file final cut events is temporary so I can copy it to another drive while I am working on this. . i got a new message that reads...
Final Cut Pro must restore or move corrupted databases before opening.

Similar Messages

HT201364 I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X Mavericks without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ

I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message Acrobat could not open because it is either not a supported file type or because the file has been damaged

Can anyone help with this? I cannot open PDF files sent via e-mail?

Thank you.
I did this and they said that they send thousands of these e-mails and attachments out and we are the only people who are having trouble. I tried several other computers to see if the PDF opened OK on them but had no success. I still get the same error message

When ever i'm trying to install an app from the app store i'm getting the following error "We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed", plz help me to rectify this .

when ever i'm tring to install an app from the app store i'm getting the following error.
"We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed".
someone plz help me to overcome this.

Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall

Recover redemption codes/Apple configurator could not open your library

Hi,
I closed Apple Configurator down when a couple of iPads weren't responding and not unsupervising as they were supposed to. When I started it back up it said "Apple Configurator could not open your library. The file couldn't be opened.' I've tried restarting, updating, and searching google for a fix.
I did come across this: Re: Apple Configurator 1.2 "The file couldn't be opened", but when I went to search for ~/Library/Containers/com.apple.configurator, it turned out that the directory doesn't even exist.
I don't have Time Machine enabled on this macbook, and we have a number of redemption codes at risk of being lost here as everything is saved in that configuration.
Alternatively could someone please advise if/how it's possible to use the redemption codes we had purchased again - if we were to start again with a brand new installation of AC?
I would greatly appreciate some support with this issue.
Many thanks,
Martin

This has happened to me a few times and in each instance it has been solved by going to the computer and toggling sharing on and off. If this alone doesn't solve your problem try rebooting the computer and then the ATV.
The error message, suggesting that you make sure your computer and ATV are on the same network isn't likely to be helpful, especially if your ATV and computer are both connected via Ethernet. Most likely your ATV just isn't able to get a share connection from the computer and the above should solve that problem.

Apple Configurator could not open your library

Hello all,
I am having an issue with apple configurator. It froze up while I was running app and iOS updates on an iPad and I had to Force Quit Configurator. When i tried to reopen i got the error that says "Apple Configurator could not open your library. The file couldn't be opened."
My latest backup of this computer is a bit old so I am trying not to have to restore this computer with that backup and have to backtrack a bunch. Anyone have any ideas on how to get the library back or restore it without having to fully restore from a backup of the computer.
thanks

I've had the same error appear as well and have managed to fix it.
Inside the /Users/Shared/SC Info folder is a file named "SC Info.sidb". Both the file and the folder are hidden so you'll have to remove it using Terminal.
rm /Users/Shared/SC\ Info/SC\ Info.sidb
Delete this file and it will work again.

I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wron

I have tried to add a hotmail account to Thunderbird because my Internet provider will stop e-mail support in the near future. I was able to add a hotmail account to Thunderbird, but I get the following error message when I try to receive e-mail in this hotmail account: "Configuration could not be verified – is the user name or password wrong?" (The hotmail website receives the e-mail.) User name and password is certainly correct. I have a 8.1 OS. Thank you.

got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails.

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Configuration could not be verified - is the username or password wrong?

I run Windows 7 Professional 32 bit. Downloaded and installed Tbird 31.1.1 today.
Logged in to my Gmail account using copy and paste of my username and password from a file. I enabled IMAP. Logged out of my Gmail account.
Turned off Windows Firewall. My task bar is red at me with 1 important message: Windows Security Center Service (Important) The Windows Security Center service is turned off.
I have no antivirus software installed other than Microsoft Security Essentials (MSE.) I went to Control Panel | Programs and looked, finding nothing. This was to be expected because I haven't installed antivirus software before.
Restarted in Safe Mode with networking, which seems to turn off MSE.
Back in TB, I clicked Create a new account: Email. Entered my name, Google E-mail address, Google password. I used copy and paste to enter the same Gmail address and password that worked for my login minutes previously. It autopopulated the fields. I clicked Done. After a few seconds, got the error message:
Configuration could not be verified - is the username or password wrong?
So with no antivirus software, no firewall, and restarted in safe mode, what is the problem?
Thanks.

I tried again today without success. I have been able to get Tbird to download mail from a non-Gmail provider but not send messages with this non-Gmail account.
I have enabled 2-factor authentication in Gmail for this account. I followed the instructions from Toad Hall at 9/20/14 1:28 PM here https://support.mozilla.org/en-US/questions/1020778
I got the password from Google and went to Tbird. I went to Tools | Options | Security | Passwords and deleted all the Gmail entries. I shut down and restarted Tbird. I highlighted the Gmail account I created and hit F5. Nothing at all happened. I deleted the account and tried to recreate the account again. I got the familiar error message that Tbird cannot set up the Gmail account. So now what?

Ipad, Error message "Safari could not open the page"

Hi... I am getting the error message "Safari could not open the page because the server stopped responding"
I have read the previous replies to this error message and have made sure the Ipad is connected to internet (skype works fine.)
I have also done a hard reset on my Cisco router.
I have Reset Ipad to factory settings twice.
I have Reset network settings five times
I have Powered off and on five times,
turned wifi off and on countless times.
Any idea other ideas? Ipad was bought in US 3 weeks ago. Worked fine at hotel in mexico. I am now in Bolivia. Different countries screwing it up? Could my router be too old? My Mac and iphone work fine on it though, although they are also old and since my macbook refuses to update it runs on OSX 10.5.8
Thanks, your help is immensely appreciated.

Can you connect to the internet using other WiFi networks? Have you even tried outside of your own home WiFi network? Have you tried anything I here yet?
iOS: Troubleshooting Wi-Fi networks and connections
Occasionally I get this message in Safari but I also can't get online with any browser when I get the message. What I always do - and it always works for me - is to close all apps on my iPad and reset the device. I don't know if closing apps has any real effect or not. Most likely is it the system reset that brings it back to normal behavior.
Due to the fact that you have restored to factory settings twice already, I can't believe that resetting the iPad would do any good at all. But you are getting nowhere anyway, so try it if you like.
In order to close all of your apps, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Crystal Report Runtime Error 9.0.Could not open the report

Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.N

Hi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

How can I resolve error message, Linklok could not open the file ?

I have an MP3 subscription download link (with Abraham HIcks) but I am unable to complete the download because I get the error message "Linklok could not open the file".

Please have the site administrator contact us at vibralogix.com as it appears something is not setup correctly with Linklok on their site.

Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25bdaf18c3b9b1a1ee8\ab4027db46dde994b955a68c2fdf44a. verify that you have sufficient access to that key, or contact your support personnel. please go to http:\\hp.com\support for troubleshooting information about "fatal error" and " msi.webprintlist"

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

GLUT: Fatal Error in gloss: could not open display:

Hi, I'm trying to log into one of the other macs in my office and run a program I wrote in openGL (in c). I ssh -X into the machine, but then when I try to run the program, I get an error that it could not open a display. It happens with simple test demo programs in Mesa. Can someone help me figure out how to get a display. These things confuse me very much. I'm going to need to do this when I ssh in from home and need to open the graphics program. Also, I'm going to need to do this when I ssh in to other machines around the lab. I don't know what is different about this between macs and linux. On linux I've had to type xhost + before, but that's always solved it. Any suggestions?
Thanks in Advance,
Sean =)

Yes thank you for your response.
And my replicat is in Windows server2008
and am using mysql2012
here is my replicat param file
replicat RBCNR
targetdb ATSTGT_2012 userid atstgt, password atstgt
sourcedefs ./dirdef/ORACLEbasicExtPumpReplicatCR.def
gettruncates
discardfile ./dirrpt/RBCNR.dsc, purge
BATCHSQL
reportcount every 1000 records, rate
map qasource.basicExtPumpReplicatCR_MRK, target atstgt.basicExtPumpReplicatCR_MRK;
and my extracts running well.
But the replicat is ab bending due to it can't find the sourcedef file

HT200261 Configurator Error. Apple Configurator could not open your library.The file couldn't be opened because it isn't in the correct format.

Similar Messages

Maybe you are looking for