HT201066 My screen recording will not stop loading

how do i make it stop? I finished what i was recording and it just says Finishing Recording....

Seeing the white,  blue or gray screen with spinning thing for too long is a sign of trouble
It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
go through the steps here one by one or have someone take a look at your machine
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive

Similar Messages

  • MBA will not stop loading.

    I have a 13" macbook air that I bought in 2010. When I turn it on I only get the apple icon and the wheel. Will not stop loading. What can I do to fix this?Wil

    You didn't say which operating system you are using, so this applies to OS X 10.6 and earlier: http://support.apple.com/kb/TS2570

  • My pro will not stop loading ...

    hi,
    i have a mac book pro that's a few months old. last nite the software was updating and it looked like it would take a while and so i quit and it didn't seem to stop........i waited it and decided to restart (by pressing the start up button for a bit to shut down and then started up again) and when i did go back on it would not stop loading.......the mac intel update that i had been updating was to take a long time (about an hour at the longest) so i let it reload for about an hour and it never stopped........i shut it down again for a while and did it again and still nothing......same for this morning.
    i do not have apple care and am past the 90 day tech help so i guess the option would be to send it back to apple because my warrranty is still good......before i do i thought i would try here and see if anyone has any ideas.....like inserting the original software and do that start up thing by hitting certain keys.........i just don't want to void the warranty...any ideas?

    Sounds like you had a corrupted system prior to updating. You may be able to restore without erasing the hard drive.
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    Note: Do the following to repair the hard drive.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Mail will not stop loading, twirling rainbow icon will not stop, cannot close mail application then.

    Just downloaded OS X Mountain Lion and on my Mac Book Pro (mid 2009).  When I select the mail application this problem occurs: the rainbow icon that twirls will not stop, and then I cannot close the mail program at all.  No clue what to do next, thanks for the help or ideas. SanibelMan 09/09/2012 @ 2am EST.

    Click on the apple in the top left corner of the computer. If it doesn't let you, open another application such as finder, and then click it, then go down the force quit, then click mail and then press force quit.

  • App will not stop loading

    I was playing a game (Pocket Frogs) on my iPad mini when an ad for another game app (Skyburger) popped up. I wanted to touch the 'x' to close the screen but accidentally touched on the screen and Skyburger started loading.  The problem is that it won't stop loading and, strangely, Pocket Frogs is still visible underneath the loading page.  I can't get back to Pocket Frogs or stop Skyburger from loading. It's stuck on a black & white "Loading" bar with Pocket Frogs visible (but not accessible) underneath the black background behind the loading bar.
    How can I get this app to stop loading so that I can access Pocket Frogs again?
    Thanks!

    Update: strangely, the problem fixed itself. I checked again after about a day and the loading page was gone, Skyburger never loaded, and Pocket Frogs was visible again. So if this happens to you, perhaps just try waiting it out.

  • My Macbook Pro will not stop loading at the start up page!

    you know the start up page that appears when you press the power button, the blue ish white one with the apple logo on the middle and a circular loading thing? Well mine won't stop loading. I left it on all night and it  still hasnt finished loading. Its the circular one that just  goes around and around. Helpme! Wjat should I do??

    Seeing the white,  blue or gray screen with spinning thing for too long is a sign of trouble
    It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
    If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
    go through the steps here one by one or have someone take a look at your machine
    Step by Step to fix your Mac
    Mac won't boot or "You need to restart"
    Create a data recovery, undelete boot drive

  • Imovie will not stop loading

    I just recently upgraded to ilife '08 and everything seems to be working fine except everytime i open i movie the rainbow loading icon, goes on, and on, and on...I've tried just leaving it up but eventually i have to force quit because it is going nowhere

    Hi!
    Did you ever figure it out because I have the exact same issue as you and I have reloaded the software and done the software update as well.
    Thanks,
    Mark

  • Smart Recorder will not load in Audigy 4

    I recently re-installed Audigy 4 and installed all the current updates and Smart recorder will not load. I get a message saying "Smart Recorder has encountered a problem and needs to close". All the other Creative Apps work fine. I am running XP Sp3. Any ideas out there

    anyone?

  • Re: g6t-2000 loading circle next to cursor will not stop blinking

    I have the same problem.I got a blinking circle on my screen and every time this circle show up, i have to turn off my pc because don't let me do nothing. Any solution for that issue? My pc:HP ENVY Recline TouchSmart All in One - 27-k350 (ENERGY STAR)Número de modelo: J4W47AA

    Hi again Andieco, It is good to hear back from you! If your computer is not freezing when you are referring to a white circle, there may be an issue with the touch screen software installed on your computer. To correct this, I suggest re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), and then update the software by Using HP Support Assistant (Windows 8). If the white cursor will not stop blinking after performing the steps in the documents above, I recommend returning your system back to a previous restore point to before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

    After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

    I see that you ave changed some network.http prefs.<br />
    Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page.<br />
    network.http.max-connections 48<br />
    network.http.max-connections-per-server 16<br />
    network.http.max-persistent-connections-per-proxy 16<br />
    network.http.max-persistent-connections-per-server 8<br />
    network.http.pipelining true<br />
    network.http.pipelining.firstrequest true<br />
    network.http.pipelining.maxrequests 8<br />
    network.http.proxy.pipelining true<br />
    network.http.request.max-start-delay 0<br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • My iphone 4s will not stop autofocusing on the lock screen camera?

    My new iphone 4s will not stop autofocusing on the lock screen camera, (the regular camera is fine.) It seems to focus on my face and then the green box surrounding my face doesn't go away, and I cannot click anything or exit until my screen locks after 15 seconds. What is wrong?

    how did you turn it on?
    I ask because I may not own a iphone4s but only a iphone4 and it don't have a LED on the front only on the back

  • What do you do when a movie you buy, will not down load?

    what do you do when a movie you buy , will not down load?

    I tried again this morning. All I see is a white screen with the words "iTunes Store" in the center of it, in gray. When I click on store at the top, and then "Home", the top of the browser says "Accessing iTunes Store" with a progress meter that goes halfway, stops and then it turns into the black Apple logo. Same thing happens when I try to click on that little house icon.
    Do you guys see album covers in there, or what? I downloaded the itunes software yesterday to my desktop AND laptop, and I am experiencing the same problem on BOTH computers. I am running Vista Home Premium, on DSL.
    Oh, and thank you for the link to the troubleshooting for this--I am reading it now, trying to figure this out.
    I finally figured out that I could access the iTunes store from my iPod (duh!!) last night, but I'd like to be able to do this on my PC too. So it's larger and easier to see.

  • Creative Smart Recorder Will Not L

    I've successfully used USB Sound Blaster Li've! Model SB 0490 since January 2006. Today is different. Inexplicably Smart Recorder will not load. All other Creative programs (such as Surround Mixer, Graphic Equalizer) load without a snicker. I've run the diagnostics and everything checks okay. I used the CD to "repair" the software. Instead of loading I instantly get the cursed stop-everything Microsoft message "...Microsoft has encountered a problem and needs to close. Please tell Microsoft..."? This is XPHome fer ya.
    The forum on this product while dated contains nothing I can see about this. Any thoughts would be much appreciated.

    Want to let you all know that I think I solved the problem, or actually, two problems.
    Problem - I installed the 64-bit driver, which included the Audio Console. Then, when I installed the applications on the CD that came with the card, I unknowingly installed the Audio Console again, which was a 32-bit version. I took out the card, uninstalled everything, and then reinstalled only the 64-bit Driver/Audio Console which came from Creative's website.
    Bottom line - I installed the 32-bit Audio Console on top of the 64-bit Audio Console. Creative should write drivers or give better explanations so regular consumers can avoid this pitfall. I'm a computer tech and figured this out, but most folks wouldn't.
    Problem 2 - I can't blame Creative for this one. I turned off my onboard 394 (Firewire) port. I don't use it anyway.
    When I did those two things, my issue went away. The X-Fi Fatalty now works perfectly.
    Thanks to the two people who responded here. Hope this helps someone else.

  • Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system.  Aircard will not stop self-assigning IP address.  Any ideas how to resolve successfully?

    Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had.  After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8.  I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
    Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure.  Only way to my home network and router is ethernet now.  Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
    Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

    When see the beachball cursor, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • ITUNES WILL NOT STOP CRASHING!!!!!! - i'm fed up with it.

    ITUNES WILL NOT STOP CRASHING!!!!!! - i'm fed up with it, i cant load it, i cant add music too library, i cant sync my phone, i cant update, it runs for about 30 seconds, and crashes every time. i havent added a folder to the library, only tried to add mp3's which have previously worked fine... what else is there thazt i can manage my iphone data  with?

    What kind of a computer are you using ?
    Have you checked your Firewall?

Maybe you are looking for