HT201068 My Remote Desktop 3.8 is refusing to update. Is anyone else having this problem?

My Remote Desktop 3.8 is refusing to update.

Welcome,
I've upgraded 3 systems (MBP 2012, MBP 2013 Retina & late 2009 iMac) and haven't had this issue.
What's your box?
Regards,
Shawn

Similar Messages

  • HT3310 Can't get remote and mic to work at all with my iPad. Anyone else having this problem?

    Can't get EarPods remote and mic to work with my iPad 3. Anyone else having this problem and, if so, how did they fix it?

    I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
    What are the system requirements of your headphones & mics?  It's possible they are not compatible w/Macs and/or your current OS system. 

  • Almost everytime I sign into Game Center or into a game itself my iPad goes back to desktop. Does anyone else have this problem?

    I'm having a lot of problems sometimes signing into Game Center, or when the game itself is loaded I will click on something and it pretty much crashes and goes back to desktop! This is very annoying. Just not sure why this keeps happening. Does anyone else have this problem and know what the cause of it may be?

    My guess would be you don't have enough memory available to run the games that you are trying to play. This is not supposed to happen in iOS - but I have seen too many instances to believe that the iOS can handle it properly all of the time. My suggestion would be to close all apps in the recents tray, reboot and start over again and see if that helps.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    The problem could be something else software related and restoring the device might help, but I would start with this and see how it goes.

  • I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

    I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
    When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

    Did anyone ever suggest you reset your PRAM?
    http://docs.info.apple.com/article.html?artnum=2238
    Also might want to try resetting the SMC, although I
    doubt there's an issue there.
    http://docs.info.apple.com/article.html?artnum=304123
    I'm getting tired of people who supposedly know what
    they're doing simply guessing that resinstalling the
    OS might solve the issue. It's like trying to dissect
    a frog with a sledge hammer, and wondering why you
    didn't learn anything about anatomy in the process.
    These sorts of things, although bizarre, should be
    (and probably are) fixable without major surgery.
    Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
    I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
    Would TechTool Pro detect a bad HD or RAM?
    Thanks....

  • Since the Remote desktop client update 3.8.2 V1.1 my Indesign CS4 crashes when I try to print. Does anyone else have this problem?

    Problem with remote desktop client update

    I find it interesting that since Screen Sharing is available, and works "just fine" that a Remote Desktop Client would be needed to be installed.
    I installed it, but I'm not sure why.
    I found the updated application in /System/Library/Core Services/RemoteManagement/ARDAgent
    Which is also where the screen sharing and vnc bundles live.  I clicked on it to see what would happen -- nothing.
    I found these ports in another discussion
    TCP and UDP port 3283
    TCP and UDP port 5900.  (Also used for Screen Sharing in OSX 10.5 and later)
    port 22
    This page confirms their use along with the use of other ports:
    TCP and UDP ports used by Apple software products - Apple Support
    Additionally TCP port 5432 is used by ARD
    Having recently noticed (through "network utility" that my computers have had a "ton" of open connections.
    This severely hurt system performance.
    I note that neither my Airport Express nor my Mac can set up a firewall on these ports.
    While I haven't noticed the ARD ports being used, I cannot help but wonder if this is set up for a CIA/NSA backdoor into my computers.
    On a less paranoid level, perhaps Apple is planning on adding on-line help to debug our problems in "real-time".  ;-)

  • Having problems with wake on LAN ... does anyone else have this problem trying wake your mac remotely?

    I've set my computer in system preferences to wake the computer from network, yet it doesn't seem to work.
    Has anyone else tried to do this using a remote desktop and found any success?
    I've even made a schedule for the computer to wake at a certain time, but if I try to log on remotely too late, the computer has already gone back to sleep ...
    any advice?

    Me too. I thought iChat under SL or Lion would do it, but it will not wake up a remote mac with a request for screen control, or a video/ text request. Any ideas?

  • 10.9.3 on iMac 27", dock displays near middle of screen, desktop picture isn't covering whole desktop. Anyone else having this annoying glitch?

    Hello Everyone.
    I upgraded an iMac 27" (3.4 Ghz, Intel Core i7, 3TB fusion) from Mac OS X 10.8.6., to Mac OS X 10.9.3 a few days back.
    Ever since then, the 2nd user to login on a given day, gets the dock displayed near the middle of the screen. It still interacts OK (e.g. you can launch applications from there), but it is not in it's correct location. The desktop picture (in this case, a shade of solid dark grey), only covers the smaller desktop area (up to where the Dock is). The remaining area of the screen automatically gets a 'light grey' background colour.
    So person A logs in, no problem. But when person B comes along (with perosn A still logged in), the user logins, and they get this 'chopped of' version of the screen, with the dock mid-screen. (See screenshot attached).
    The users can still click on any dock icons, and the applications will open up. But the dock won't return to it's original home, and refuses to 'jump' back to their proper home (at the bottom of the screen).
    I've tried using CSCREEN to change the resolution at startup, via a terminal command and Automator, but that only works on some occasions. Others (like the attached screenshot) boot with the two-colour background, and 'confused' dock. A manual screen resolution change in the Settings area (down and then back up again), resolves the issue for that boot.
    I've tried stripping back all non-essential plug-ins, tried removing a variety of start-up items, add-ons etc. I've tried creating a 'test' account, and the same issues appear to this account too.
    Is it just me, or are others having problems with a misbehaving dock / screen resolution, in Mac OS X 10.9.3 / on an iMac 27"?
    Thank you!
    D.

    Hi folks.
    I found a solution...Looks like the Dock is the culprit it's self. So, I made an automator app that I fire up automatically at login time. The automator app runs a shell script command:
       killall Dock
    (make sure you have a capital D on Dock)
    The Dock gets closed off, and it then re-opens in the correct spot (bottom of the screen -- not the middle of the screen). Hope this helps someone else!
    Enjoy.

  • Have lion on 5 year old 20" mac desktop. tried to download and received a message mountain lion not compatible with this computer. anyone else have this problem?

    have lion 10.7.4 up graded from tiger 10.5.8. tried to download mountain lion but received a message that mountain lion is not compatible with my computer. anyone have this problem or suggestion?

    It's actually not the chip... it's the drivers for the video card. this is what my friend who does IT work said.
    "The drivers for your Mac's video card are not 64bit compatible even though the computer itself is. Mountain Lion has done away with all 32bit OS components so it only runs on full 64bit MAcs now"
    So even though I updated my video card to a newer version and my computer itself is 64bit... apple didn't create a driver for it that was 64 bit. My hardware is fine for this update and the chip can handle it. It can handle all my 64 bit programs just fine. It's apple forcing me to update and buy a new expensive computer. So much for long lasting computer... they last long but they won't be supported very long.
    Why not release a version of mountain lion that supports 32 bit graphics alongside the 64 bit? Wasn't that what grand central was going to accomplish? This is rubbish.

  • Is anyone else having a problem where Keynote is taking over every desktop?

    I am suddenly faced with my keynote presentation on every screen. I've tried refreshing PRAM and reloading the software but to no avail.
    I am on Mountain Lion and iWork 09.

    Go to System Preferences > Displays > Arrangement > Uncheck "Mirror Displays" at bottom of dialogue.
    Good Luck,

  • Windows 8.1 with creative cloud logged in makes Desktop slow, anyone else have this behavior?

    So I had this problem I was trying to figure out for the last week with a new laptop. When I installed the laptop everything was lightning fast. After I finished installing all the software, Windows desktop was slow, particularly starting applications like task manager would show a blank dialog for 30 seconds. Outlook, would be laggy and CrashPlan Desktop application would take 2 minutes to get past the splash screen.
    To figure this out, I created a 2nd user on the system and everything was fast again. So I started copying data from one user to the other. When I started connecting applications, I noticed the Desktop slow again after logging into Create Cloud. I then logged out and checked. Definitely has to do with being logged into Creative Cloud. Anyone else have this behavior?

    I have tried lots of fixes including renaming files. The only thing that works for me is to remove the following windows updates:
    KB2995388
    KB2975719
    Turn  off auto updates before you start as you need to reboot afterwards.
    I set auto update to the download but let me choose option otherwise these 2 re install themselves.
    I'm hanging on for our free upgrade to Win 10 now....

  • Desktop restart shows flickering black/white screen, then black. Could not restart. Anyone else with this issue?

    Desktop restart shows flickering black/white screen, then black. Could not restart. Anyone else with this issue?

    Have the PRAM battery looked at.  It may be all that is needed.

  • When finished using airplay my desktop display is blurry.  how do i prevent or correct this problem?

    when finished using airplay my desktop display is blurry.  how do i prevent or correct this problem?

    Open the Displays preference pane and select Best for display.

  • Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Hey Marco'96,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/HT201343
    Thanks,
    Matt M.

  • Remote desktop broken after 10.9.3 update

    After the 10.9.3 update, remote desktop is completely broken...
    The ard status monitor display : Apple Remote Desktop is disabled. I try a clean install (app + system library coreservice remote management + user library pref ans aap support deleted.
    After the Remote Desktop 3.7.2 installed from the Apple Store when i try to launch the application i get this message : The remote desktop client does not mach the administrator software version. Check for update.
    And this is the problem : there is no updates available !!!!
    I have try to install some 3.7.1 client from some dmg, but all false : ARD agent validate multiple error ( on log) error 6405, fatal error 5, error 100, error 6404, broken pipe, fatal error 0
    Now i am back to the clean uninstall and with the new Remote Desktop 3.7.2 with the desktop client not matching and not running...and without any update available.
    thanks for help !

    Nice idea and helping really !!!!
    On safe mode, i could install an old remote desktop client (3.6.x) - and the client works fine as client.
    Next i get the last Remote Desktop Admin from the Apple Store and it run also always in safe mode. No error, but all my setting were lost. With the Remote Desktop Admin running i created a new client installer and quit the Admin app for updating the client to the last release (3.7.1). I test all in safe mode (running as admin and as client) and finally reboot the computer to quit the safe mode.. and finally all was running again.
    I don't know why during the 10.9.3 update Remote Desktop was corrupted...
    Now i need to put back my remote client, but this not really a problem.
    Thank a lot th Deadzak for his genius intuition.

  • My 4th gen iPod touch won't recognize the remote feature on earbuds other than Apple earpods - anyone else had this issue?

    Apple earpods don't fit my ears well, so I bought a pair of Sony earbuds a few months ago. When they came, I noted that I could turn volume up and down, but the remote portion didn't work - couldn't pause or skip music. They weren't the highest quality so I assumed it was a fluke.
    I just got a new pair of earbuds and same issue! The volume works but the remote does nothing. I tried to use my boyfriend's Apple earpods with my touch and the remote works fine. Also, the new earbuds I got work, remote and all, on his 4th gen Nano.
    I can't seem to find anything online about why these earbuds that are supposed to be compatible wouldn't be working. I've cleaned out the audio jack so it's not a lint issue, plus it really does work just fine with Apple earpods, only alternatives don't work. And again, I can hear fine and the volume can be controlled but the remote to pause and play and skip isn't recognized at all.
    Any suggestions would be appreciated!

    So just in case anyone else ever runs into this...
    I solved the issue and it was that between the plug of the new earbuds being slightly thicker than the Apple earpods, and the width of the case that I was using for my iPod, there wasn't a connection being made to activate the remote function.
    I took off the case and now the earbuds work exactly as they should!

Maybe you are looking for

  • Using Import Statement

    Hi, I understand that in order to access the methods of a different class, I can "import" it. Here is my question though: Where am I importing it from? I mean, surely if I am importing a class from e.g. the Java.util package, doesn't this package nee

  • 5530: Trouble with connecting to laptop via blueto...

    I have Nokia 5530 and laptop Toshiba A300.  I can pair  laptop with Nokia E50 and 3230 and Sony Ericsson. There is Vista installed on Toshiba though it doesn`t want to pair with Nokia 5530.  Nokia 5530 can pair with PC with Windows XP installed and o

  • SQL Loader control file script - INFILE

    Hi, The data stored in the file "c:/test_<yyyy>_<mm>_<dd>". The <yyyy>, <mm> and <dd> has to be from sysdate. The infile gets generated on daily basis. LOAD DATA INFILE 'c:/test_'||to_char(sysdate,'yyyy')||'_'||to_char(sysdate,'mm')||'_'||to_char(sys

  • Buffer table not up to date when searching shopping carts

    Hi Friends,    This is probably a common error but could not find specific note or forum threads to my specific issue. We are on SRM 5.0 Extended Classic with SP level 15. There has been no org changes or user changes. when existing user tries to pul

  • Problem obtaining stereo separation in multitrack export mixdown

    When I place stereo mp3 files in the timeline (one voice in the left and one in the right channel) and then select File - Export - Multitrack Mixdown - Entire Session, what I get is a mono mix in the left channel and a mono mix in the right channel.