HT201109 After FCPX 10.1 Crash, event in Library empty?

I am working on a very large project in FCPX 10.1 in a library in one event where I have 48 compound clips. The project also uses media in other events in the library. While working in one CC, FCPX crashed. When I reopened FCPX the event with the project and 48 compound clips was empty. Other events were still there. I went out to the external hard drive to review the contents of the library and event and the event was all there. I am uncertain what I should do next? It just seems like FCPX does not recognize it?

A new twist has occured when I try to open the Library. It goes through the whole loading process, and now the whole Library does not appear. When I try to open it again, I get the message that "The Operation couldn't be completed. Permission denied. "Primary" (my name for the library) is already in use by "myname" on "my-names-macbook-pro-2.local".
I tried opening another Library on the same external drive and this was successful.
I was in the middle of replacing an external backup drive to backup my external drive with 2.4 TB of data, so I am a bit concerned. The project I am finishing up was a 17 GB 1 hour and 45 minute movie.

Similar Messages

Adobe After Effect CC version crashed after import file.

Adobe After Effect CC version crashed after I import png file. I've tried to reinstall the program again and it still doesn't work.

1.What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number.
-Adobe After Effects CC 13.2
2.Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
-Yes, I did.
3.What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
-Mac OS X Yosemite.
4.If you are getting error message(s), what is the full text of the error message(s)?
-There is no message when it getting error. It just show the spinning rain bow wheel to make me have to wait forever but nothing happened, so I need to force quit the program.
5.What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
-1.Open the program
-2.Set the composition setting
-3.import some file to library.
-example .png file[normal picture file 37kb]
-4.drag the file to timeline.
-5.The program stop working immediately.
6.Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
-Yes,It was working very well before, then it crashed. I didn’t change or update any thing in my computer.
7.Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected.
-Date/Time:       2014-12-22 10:41:48 -0800
OS Version:      10.10.1 (Build 14B25)
Architecture:    x86_64
Report Version: 21
Command:         After Effects
Path:            /Applications/Adobe After Effects CC 2014/Adobe After Effects CC 2014.app/Contents/MacOS/After Effects
Version:         13.2 (13.2)
Parent:          launchd [1]
PID:             9395
Event:           hang
Duration:        2.00s (process was unresponsive for 17 seconds before sampling)
Steps:           21 (100ms sampling interval)
Hardware model: iMac13,2
Active cpus:     4
Fan speed:       1204 rpm
Timeline format: stacks are sorted chronologically
Use -i and -heavy to re-report with count sorting
8.What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
9.Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
-No, I don’t have.
10.What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime”.
-H.264 in a .mov container
11.Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2”.
-Yes, I do have quicktime version 10.4
12.What other software are you running?
-I do have PS,DW,ILL,An,Media Encoder and AE. When I’m using the AE software I don’t have other software running with it.
13.Do you have any third-party effects or codecs installed?
-No, I don’t have.
14.Are you using OpenGL features in After Effects?
-No, I don’t us it.
15.Does the problem only happen with your final output, RAM preview, or both?
-I cannot even use the program.
16.Are you using Render Multiple Frames Simultaneously multiprocessing?
-No, I don’t us it.
17.Are you using the ray-traced 3D renderer?
-No, I don’t us it.
18.If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.

How do I sync my Ipod to a new library after my computer has crashed?

How do I sync my Ipod to a new library after my computer has crashed?

iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
Sync transfer is one way, matching the device content to the content on the computer, except purchased content as mentioned above. For transferring other items from an i-device to a computer you have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141
In general do not regard your i-device as a reliable unique storage for your media. It is not a backup device and everything is structured around you maintaining a backup of your media on a computer backup.

How do I retrieve my music library after a complete computer crash. I have a backup on a flash drive and I can access my Itunes account but my play lists and music are gone.

How do you retrieve downloaded music and playlists after a complete computer crash. I can log into my Itunes account and make purchases but my music library is gone. I have an external backup on a flash drive but for some reason the music does not show up there either. It's like I have a brand new account and have to start all over. Itunes must have an archive I can access to get my music back, right?
Maya

Playlists should be part of your backup copy.
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

After the restore, iphone crashes on Apple logo and cant be recognized by PC and iTunes

after the restore, iphone crashes on Apple logo and cant be recognized by PC and iTunes. I think I was actually doing the back up and my iphone shutted down and now it cant boot back up! And the PC and itunes recognized for a while like for a second and then disconnected but now neither pc nor itunes sees it. Help please!

If your phone is jailbroken, you cannot get help here.

I Have a Ipod Classic that all my music is on. After my previous computer crashed I have not had any of my music able to be transfered to the new computer from the Ipod. Is there a way to do this

I Have a Ipod Classic that all my music is on.
After my previous computer crashed I have not had any of my music able to be transfered to the new computer from the Ipod.
Is there a way to do this?

Unfortunately, unless you have a backup and can restore the iTunes library to the new computer, you are stuck with the current state of the iPod. This is one of those things that makes doing backups so important.
Unless your music is all purchased from iTunes (not from your own CD's that you imported into iTunes and then downloaded to the iPod), you will be able to re-download all your iTunes store music back to the iPod when you install iTunes on the new computer. When you first attach the iPod to the new computer and new iTunes the first time it will tell you that this iPod is synced with another iTunes library and let you initialize the iPod (which will erase everything on the iPod - so don't do this unless you don't care about the stuff on the iPod now).
I've seen 3rd party apps in the past that will let you copy music/content from iPod to computer and bypass iTunes, but not sure if they still exist as this was several years ago.
good luck

After Effects CC 2014 Crashing on Start-Up

I downloaded/updated to the latest CUDA driver ... CUDA Driver Version: 7.0.29 and now After Effects CC 2014 crashes instantly on start-up ...
I'm on a MacBook Pro (Late 2013) running OS X Yosemite 10.10.2 with an Intel Iris Pro 1536MB card, 2.3 Intel Core i7
What can I do to fix this issue?
Thank you,

See this:
Avoid installing NVIDIA CUDA drivers on computers with AMD GPUs

Upon Launch After Effects Pro CS3 Crashes - Windows 7 Ultimate 64 bit

I recently installed the 32 bit version of Adobe After Effects Professional CS3 (and later applied the 8.02 Update) on my Windows 7 Ultimate 64 bit computer (Service Pack 1 - 12 GB RAM). It's installed (along with all of my other applications) on a 256 GB solid state drive.
Shortly after launching the application (as it begins to load), the following message appears:
After Effects Error: sfntread library error (83 :: 4)
It continues to reappear several times after clicking 'OK'.
Then a final error message appears just before the program aborts its loading process and crashes:
After Effects warning: unknown BIB error, sfntread library error CT, 0
I currently have the complete version of Adobe Design Premium CS5 also installed on my Windows system. No problems occurred with its installation and all of the programs within the suite launch and load properly as expected. The only other Adobe CS3 application that I also installed before installing After Effects CS3 was Premeire Pro CS3 which also installed, launched and loaded properly with no error messages appearing during the entire process.
I did an initial search here on the forum using the error messages but did not find a solution that is workable with my particular operating system (64 bit) and the 32 bit After Effects Professional CS3 application.
Any assistance with this would be greatly appreciated.

Here's a page that might be useful:
http://aeerrors.myleniumstuff.de/?p=370
Note that Windows 7 is not listed as an operating system supported for After Effects CS3:
http://kb2.adobe.com/cps/836/cpsid_83637.html#main_After_Effects_CS3_system_requirements
The application was written, tested, and released before Windows 7 was available.

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I am trying to download my CS4 product after a hard drive crash

I have been searching the site for what seems like forever. I need to download my CS4 suite after a hard drive crash. All I can find are my serial numbers. Where should I be going to find my downloads. It seems like it should be under "orders" but its not. I need to get this program going as I' losing valuable time on my projects.
The orders page shows nothing, even when I click on orders or history:
The products page shows my purchases, but doesn't allow for a download:
Thanks

Direct Downloads
And really, do back up your installers for situations like this. That stuff may not be around much longer one day...
Mylenium

After Windows 7 Kernel crash, I cannot start Photoshop CC any longer.

After Windows 7 Kernel crash and Windows Reboot, I cannot start Photoshop CC any longer. After Photoshop start, Photoshop terminates itsself with a general error messages. I tried to reinstall CC, without deleting the application settings, but didn't help. I thing the application settings must be changed or reset ?
Thanks in advance
Best regards.

Still searching for any Launch log on my PC that give me some more details about the launch error....any idea where ?

After effect 7 pro crash after update osx to 10.4.7

Topic
After effect 7 pro crash after update osx to 10.4.7
Robinmaster - 03:53am Aug 2, 2006 Pacific
Hi all write this messages bacouse i have a problem with start up of my AE 7 pro. AE7 pro crash when boot after initialization of GUI. try remove a open gl plug but not resolved e problem..
E error is
Date/Time: 2006-08-02 12:44:19.674 +0200
OS Version: 10.4.7 (Build 8J2135)
Report Version: 4
Command: After Effects
Path: /Applications/Adobe After Effects 7.0/Adobe After Effects 7.0.app/Contents/MacOS/After Effects
Parent: WindowServer [57]
Rosetta: Yes
Version: 7.0 (7.0)
PID: 2356
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000001
Code[1]: 0x00000000
Please help me.. i'm deprived of hope..
Th's
N.B i work with MAC BOOK PRO (intel ) with 2 GB of ram

Hi there, same problem here but on a PowerPC.
I just bought AE7 and installed it on my G5 (with then 10.3.7 running on it). Install went fine but the application would not start up.
Thought this might be a good time to clean up and installed fresh new system on this G5, updated it to 10.3.8 and first thing: installed AE7 again.
But: same problem. In fact, all Adobe application will not start up! The icon bounces a little and then nothing but a crash report.
For a moment I thought I had the solution, because I disabled all the "user fonts". Everything worked fine. Then I installed, as before, my Apple applications (Final Cut Pro, DVD Studio Pro, etc) and, oh no... same problem over again. The Adobe application will not start up!
Tried to disable all non essential fonts: no cure. This is driving me crazy....
Any suggestions?
Date/Time: 2006-10-14 15:43:31.127 +0200
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: After Effects
Path: /Applications/Adobe After Effects 7.0/Adobe After Effects 7.0.app/Contents/MacOS/After Effects
Parent: WindowServer [108]
Version: 7.0 (7.0)
PID: 733
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
etc etc etc...

Trying to reinstall lightroom after a hard drive crash - new hard drive

how do I re-download lightroom after a hard drive crash. I have serial number from purchasing but can't seem to reinstall. Help please. Thank you.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Holliday162 you can download a new copy of Photoshop Lightroom from your account. Please see Find a download link on Adobe.com for details on how to download your purchased software.

After effect 2014 is crashing again and again pls... help

My after effects 2014 is crashing again and again after applying any effect
my laptop config. is as follow
Model alienware 17x r4
i7 extreme edition
16gb ram
1.5tb hard disk
2gb nvidia 660
windows 8.1
Pls.....help its urgent

Update your graphics driver. Anything beyond that would require much more info about your project settings, footage used and whatnot.
Mylenium

After Effects CS5 is crashing my Mac when I trim a clip

I don't have much to explain this further but After Effects CS5 is crashing my Mac when I trim a clip. It completely turns off my Mac when I trim a clip. The only other similar thing is Photoshop CS5 is also doing crashing my Mac when I resize large images. Small images are fine but large 300dpi images crashes it without warning. Don't know what to do.
I have 8gigs of Ram and am running 27" iMac Core i5
Any help would be much appreciated!
Thanks,
Hal

Are you running these two program together?
I would think so.OK you are probably running them both as 64 bit that is great that they run 64 bit and can use more RAM and even better they actually do use more RAM.
So the solution is probably more RAM, don't run them to together or lower the expectations of Photoshop and AE.
That way they won't try to use all the RAM to do this work. It will probably do the wrk pretty fast but not as fast if you had more RAM maybe.
Also AE and PS on an iMac, what about your scratch disk. Is it a very fast external drive and how is it connected?
If you don't have a fast internal drive say with at least a 32MB buffer running at 7200rpm then there you go a real contributing ffactor.
To be honest you need both more RAM and a fast start up disk and a fast external scratch.
The new 2TB drives by Seagate run at 7200 rpm and have 64 MB cache which s as important as the rotation. You can possibly make a Raptor an external scratch as well at 300 GB they are probably not arge enough s a start up.
Those are my thoughts.
16 GB of RAM a larger faster internal drive lower the performance and memory setting as well.

HT201109 After FCPX 10.1 Crash, event in Library empty?

Similar Messages

Maybe you are looking for