HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
I have tried to burn from the share dropdown menu ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
thanks salty777

Similar Messages

Getting final cut projects to a dvd?

I need help with getting my final cut projects to a dvd. Any help would be appreciated.

I would export to a quicktime movie and then use that in iDVD.

Exporting final cut project

I would appreciate assistance in exporting a final cut project to a dvd to be edited on another computer equiped with final cut by someone else.

First determine if the other person has a version of FCP that will open the project file you'll be providing. If not, you may have to export the project as an XML file.
Next you will ALL video and audio clips as well as any other media that the project contains (LiveType files, Motion files, SoundTrack Pro files, Photoshop files, etc). Unless your project is very, very small, I doubt that all the needed media would fit on one DVD (4.3gb of usable space). You may need to put everything on an external hard drive to deliver it.
I wouldn't worry about transferring any render files. The other person can re-render.
-DH

HT201109 Why can't I open a final cut project from one computer in another computer?

I'm using Final Cut Pro Trial. Why can't I open a final cut project from one computer in another computer? When I try to open the project on my desktop it doesn't recognize the format. Please help!

I downloaded FCPX trial on my laptop as well as on my desktop. I did some editing on my laptop but I need to get the project I created on my laptop onto my desktop. When I import the project onto my desktop the videos are Red and they say "Missing File."

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

Ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

Your media is stored in Final Cut Events folder > "name of event" > original media. The Final Cut Events folder is in your movies folder or at the root level of an external drive if you are using one to store your media. Simply open iMovie and under file menu select import movies. Navigate to the original media folder and import your clips to Imovie event library.

HT3775 I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Final Cut project freezes when opening

I'm trying to open a Final Cut project (project file size is 22mb) on my MacPro, and when the status bar reaches 40% the program freezes. I can successfully open the same project on my MacBook Pro.
The project lives on an external hard drive (2 TB). The entire project, including all assets is 1.5TB. Both computers are running the same operating system and Final Cut 6.0.6. The only difference is the RAM. On my tower I have 5 GB and my laptop has 8, but I don't think this is the issue. I have tried reinstalling the software on my tower, making a new project file on my laptop and setting my scratch disks to the MacPro's desktop. Any help?

You said; "and setting my scratch disks to the MacPro's desktop."
If this means that you are trying to use your system disc for your scatch media, forget it. The system disc has too many other things to do like running the OS, swapping files and running your programs. This will definatly cause problems.

Hi, a "General error"appears on my Final Cut Project when I try to save it. I read in this Community that the solution could be save on the desktop. It works, but how could I solve it in my External HD?

Hi, a "General error"appears on my Final Cut Project when I try to save it. I read in this Community that the solution could be save on the desktop. It works, but how could I solve it in my External HD?

Is the external formatted to Mac OS Extended?
Right click the external icon on the Desktop and select Get Info.
This will tell you the current format.
Al

My final cut project reverted to an earlier version

I made a lot of changes to my final cut project today and saved the changes frequently. I just came back to my computer, opened my project and it looked like I never sat down at my computer today! I am positive I saved my changes, but the project went back to the original project I had when I first opened it up today. Anyone have an idea what happened or what might have happened?
Thanks

Well.......I don't know if this is right or wrong?
I recently started being concerned about backing-up projects, so this is what I do: put all media and project files on one of my LaCie harddrives.
The new thing I have been doing is coping the project file (.fcp) at the end of the day on my desk top, as my back up. Did this cause the problem and why?
Thanks

Intel and PowerPC Final Cut project compatibility

I have two computers, a laptop and a desktop, that I use with Final Cut Studio. Both run PowerPC chips. If I purchase a new computer with the Intel chipset, will Final Cut projects be able to go back and forth between the Intel and PowerPC computers? I spend quite a bit of time editing on the road with my laptop then get back to the office and copy the project file over to my office computer. When going back on the road, I copy the project file from my office computer and put it back on my laptop so I can keep editing while traveling.
Thanks!

There is no compatibility issue between PowerPC and Intel as far as Final Cut Pro is concerned. You just have to make sure you have the same version of Final Cut on all machines, because older versions of Final Cut Pro will not open files created in newer versions. You don't have to worry about the processor.

Can't open Final Cut Project

I'm running FCP 5.1.2 on a MBP with Leopard. The project in question was created on the same system with the same version of FCP, but while running Tiger back in 2007.
All project files and media are in the same place on an external FW800 drive, but they will not open.
One project claims to be made on a newer version of Final Cut (false), this most recent one just freezes Final Cut when I try to open it.
I've tried:
• opening other versions in the Autosave vault
• resetting disk permissions on the external drive
• trashing the FCP preferences file
• duplicating and renaming the project file
None of the above worked. Other final cut projects will open, but the common thread among the projects that don't seems to be that they were created while the system was running Tiger.
This problem seems fairly common on the discussion boards, but I haven't stumbled upon a solution yet. Has anyone found a solution?

Reconnect the offline media and life should be good.
Still, the best solution is for everyone involved with the project to be using the same version of FCP/Color.
x

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

Problems Searching metadata in a Final Cut Project Uploaded to FCS

We had an intern go through some footage that was on our FCS and load it into a Final Cut Pro project. He then went through and cut up the footage, made it an Independent Clip in Final Cut, and then Renamed the clip. He created multiple clips in Final Cut which all link back to the big master clip which is in Final Cut Server.
I then just uploaded the Final Cut Project which then created elements for all of the independent clips that were made in Final Cut. Upon closer inspection of the Final Cut Project in FCS, I noticed that in the elements of that project, it created all of the clips that we made independent. Great....almost. Two problems arose. All of the proxy files for those elements all have the same thumbnail based on the master clip, but do have the In/Out points when looking at the proxy file. Can you get the proxy file just to encode the In/Out points and make appropriate thumbnails?
Problem 2:
With these elements, when I perform a search with the exact filename of the element in the Final Cut project, it will only show me the Final Cut project. I have to open up that Final Cut project and then look into the Elements Folder of that project. Is there a way to search elements of a Final Cut project where the elements are reference files or metadata of a master clip within Final Cut Server?
If this doesn't make sense, I'll try and re-explain.

Yes, I did, but it doesn't show the element only the project and the master clip. In order to actually find it, I have to double-click the found Final Cut Project and then look into the elements tab. I'm trying now to figure out a way to make a custom lookup in the advanced search parameters that would allow me to only search Elements of a Final Cut Pro Project.

How to add music to final cut project

Hi I wanted to know is it possible to add music to a final cut project from an existing cd or even from itunes? If so how? Thanks

Just drag whatever sound file you want to use to FCP. It will automatically convert it to what it needs.
Uh, QUITE wrong. Wrong wrong wrong. Avid does that, NOT FCP.
#5 Imported music from CD or iTunes
Shane's Stock Answer #5: Importing music from CD or iTunes
To get music into FCP, it needs to be an AIFF file at 48khz, 16 bit stereo. So if you want a song from a CD, you go into the iTunes Preferences, click on ADVANCED and set this up under the IMPORTING tab:
AIFF
Sample Rate - 48.000 kHz
Sample size - 16 bit
Channels - Stereo
If you have an mp3 that you want to use, then you can convert it thru iTunes as well. As long as this is chosen as your import option, when you select a clip and click on the ADVANCED menu, CONVERT TO AIFF will be an option.
If the piece of music you want to use is something you purchased thru iTunes, I'm afraid I can't help you there. There are copywrite issues that prevent files from being converted into the format that FCP can recognize.
Shane

HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

Similar Messages

Maybe you are looking for