HT201150 the new behavior of Mavericks power button does not make sense

It should go NOT to sleep when the power button is pressed...if people wants it to go to sleep just close the lid!
Instead, when the button is pressed, the dialogue box should show up asking people what to do.

wangyb wrote:
if people wants it to go to sleep just close the lid!
Some people don't have lids.

Similar Messages

  • After installing Mavericks, power button does not put my iMac to sleep.

    After installing OS X Mavericks, the power button does not work as before, any help?
    Thanks
    Victor

    CT, the behavior of the power button on Mavericks (10.9.2) is not as the note (OS X Mavericks: Using the power button - Support - Apple) describe. I have to press four or five times de power button in order to put the mac to sleep.

  • My iphone4 power button does not work can i take it into apple store would they replace it with a new iphone or whats the deal?

    My iphone 4 power button does not work can i take it into apple store and replace it or what are some options

    Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty  replacement unit identical to the to donor
    In US $149 for in iPhone 4

  • The power button does not work

    i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

    This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
    http://www.drcellphone.com/iphone-repair-service.php
    http://www.drcellphone.com/iphone2g.php

  • I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

    Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
    https://discussions.apple.com/thread/5164919

  • I need to hard reset a Palm TX but the Power button does not function.

    I need to hard reset my Palm TX but the Power button does not function. Is there any other way to perform the hard reset or otherwise delete all of my data?
    Post relates to: Palm TX

    Hi,
    PowerBtn from the Canuck Software HomePage.
    NOTE: This is Not a Blazer friendly download and only for downloading using a Chunky Computer thingie.
    http://www.canuck-software.ca/
    PowerBtn will allow you to set a HardButton to turn the TX on and off in the same fashion as the PowerButton, if you want.
    This setting will remain active while 'Enable' on the PowerBtn screen is active.
    The user can select 'Disable' on the PowerBtn screen.
    The setting will survive a Soft Reset. (Hi PG )
    If the Palm PowerButton fails completely then you will not be able to do a Hard Reset.
    The PowerBtn app has a 'Hard Reset button' which you tap and after a time countdown (you can cancel in this time) it will perform a Hard Reset. This is the same as the Hard Reset app mentioned above.
    The 'Enable' and 'Disable' mentioned above do not affect the 'Hard Reset button'
    NOTE: PowerBtn also has a 'Program itself becomes power button' feature but I do NOT recommend you use this.
    If you enable this you will not be able to change the setting or use the 'Hard Reset button' because when you Tap on the PowerBtn Icon the TX will turn Off. The only way to change the setting or use the 'Hard Reset button' would be to Delete PowerBtn then install again.
    You can also turn your TX On by pushing the 5WayNav Select (middle button) to bring up the clock then double push it. The TX will stay on at the same place it was in when you turned it off, in the same way it would if you used the Power Button
    All the best, woz of oz
    Post relates to: Palm TX

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Power button does not react iMac Core Dua 20"

    Hello,
    I just purchased an iMac 20" intel Core Duo. I leave the machine to go to sleep during the night. Almost everyday when I want to start the next day my iMac does not wake-up pressing "enter", moreover the power button does not even respond. I have to unplug the power cable and after a few seconds the powerbutton can activate the Mac again. Can anybody help or should I immediately return for repairs?
    Erik

    Welcome to the Apple Discussions.
    One question. Is your iMac a Core Duo (no longer made) or a Core 2 Duo?
    Try resetting the System Management Controller;
    Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

  • The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

    The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
    The wrong lens F3.5/6.3  profile is checkmarked and I can not find the new  RX10  Sony 70-200 F2.8 G SMM11 profile.  The meta data in the Library module correctly list the Sony RX10 and the Correct lens. 
    How may I select the correct lens profile for my Sony DSC-RX10?

    Ask in the PS/ LR/ ACR forums
    Mylenium

  • I have updated itunes and the newest software. My home button does not work.  Please help

    I have updated itunes and the newest software. My home button does not work.  Please help

    It could be that your button has justy gone out.  You may try getting compressed air to blow out any dust in there.  If that doesn't work, you may have to get your button and ribbon replaced.

  • My ipod 5 wont connect to wifi, all the other devices in the house will does not make sense

    Ipod 5 wont conect to wifi in my house when other devices do. does not make sense, went to apple store connected no problem there. Funny thing is it has worked since christmas now all the sudden i have problems, any ideas?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

    I hope there has been found a more efficiant solution for this,  how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
    any suggestions?

    Did you try browsing your backups in the Finder ?  That is, do not go and "Enter Time Machine".  Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

  • Lenovo V570 Laptop Power Button does not work. Did I screw it up?

    Hi, my Lenovo V570 keyboard recently stopped working so I took the keyboard off to reposition the cable. In the process I disconnected another cable on the motherboard (shown in the pictures below). I also cant find the black plastic piece that was holding it down.
    Now not only does the keyboard not work but the power button does nothing. After research though Ifound out this laptop is notorius for having the power button go bad.
    When I plug in the AC adapter I do see the battery light go on and it charges so I dont think the motherboard is bad. I
    have tried every trick in the book as far as getting static out of the laptop power button (holding down power button for
    certain times). I looked at the mainteneance manual for this laptop and could not figure out what the disconnected cable does. I have tried reconnecting the cable without the plastic piece but that did not work.
    Is the disconnected cable responsible for this or should I order a new power button board with cable?
    Link to image 1
    Link to image 2
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hi Deziant,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with power button not working in your V570 laptop.
    As per the snap shot which you have shared it looks like the black support connector is broken, you can fix this cable by using a gum, but I would suggest you to visit nearest service center to fix this issue.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • MacBook Pro will not wake, holding power button does not shut it down either

    My mbpro will not wake and even holding down the power button will not shut it down. Any ideas?  Thanks.

    You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
    The try resetting the  SMC http://support.apple.com/kb/ht3964

  • Updated to IOS 8 and now power button does not respond and screen is frozen with apple logo.

    Updated iPad to IOS 8 -- screen locked.  Now screen is frozen with apple logo and the power button is not responding.
    Thanks for any help!

    That is normal while it is loading the update. Give it some time(shouldn't be more than 40 minutes). If not, hold the home & sleep/wake button until it is black, and then it restarts.

Maybe you are looking for

  • How can I reset the CTI for each clip to 00:00?

    I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me. I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But

  • Cable needed to present Keynote from Macbook? In College.

    I have a new Macbook and want to take my macbook so i can present a keynote presentation i created. this will take place at my college, which all classes has a projector (but its mounted on the ceiling) and the projector is connected to a computer, w

  • Retrieving images in lightroom

    I cannot seem to retrieve images from the Library mode. I refer to images that have previously been downloaded and most ranked, tweaked, etc. The message I get is that there is no picture. When I try then to retrieve from the original source, the mes

  • Quicktime won't start - have tried re-installing

    I have installed itunes and quicktime but quicktime won't start. I tried un-installing both and re-installing but still quicktime will not start. When I click open quick time player I get an hourglass for 30 seconds and then nothing happens. I tried

  • Button to load dynamic image in interactive form webdynpro for java

    Hi all i tried to use image field to load dynamic image as shown in the online interactive form tutorial and it worked for test but when try it with view appears inside viewset it doesnt.... so i think if we could call the image after render by press