HT201150 when i tab the power button its not sleep please tell me solution
when i tab the power button its not sleep please tell me solution
OS X Mavericks 10.9.2
You have to tap and hold for a second or so to initiate sleep function.
The new update changed the behavior of the power button a bit to avoid accidental sleep.
Best.
Similar Messages
-
My ipod cclassic 80gb is hang after trying dat press and hold method then also its not working please tell me solution
Thanks for your response and good luck wishes, I suspect I will need them!
In principle, I agree re: the manufacturer's warranty. However, I am pretty upset that this is now my second iPod to develop a critical fault within weeks of the warranty expiring, and frankly, it is not unreasonable to expect a state-of-the-art $500 electronic device to last well beyond one year of life.
I agree talking to Apple is not likely to do me any good (the clue is in how impossible they make it to talk to them in the first place) - but that is not necessarily OK. I expect I will have to pay money to get the battery replaced - again, not OK (full stop - but especially given the cost of the device and the money I have spent with Apple). Yes, the batteries have a limited lifespan, but it should last longer than this (and surely, I should notice a gradual decline in its functionality, not an instant stop).
I will try Deggie's suggestion (see my reply post), but probably won't hold my breath (think I have already done this). I probably will have to get the new battery - and probably under my own steam. It is a principle at stake and I feel I should be able to let Apple know how I'm feeling - and am frustrated that they make this virtually impossible. It sends the very clear message that they are not interested in listening to their customers. -
I just bought an iPod nano 7th Generation. When i connect it to my laptop, it doesn't recognize the ipod. I tried charging it but when I hold the power button, nothing happens. I don't want to have to return it. Please help me!
Hi dnix257,
Welcome to the Support Communities!
What version of the Windows Operating System do you have?
What version of the iTunes software?
The troubleshooting steps below may help you with this:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Judy -
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?
Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac -
When i connect to iTunes it says that i have enter my passcode to go in, but i have forgotten my passcode, and the power button is not worrking, is their any other way to do it without the computer or any other internet stuff or stores,
No. You need a computer with iTunes and an internet connection.
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I don't think my Mac Pro is completely shutting down. When I hit the power button, it just turns off immediately instead of going through the normal shut down procedures. I heard that I should try resetting the SMC, which involves removing the power cord. However, when I remove and replace the power cord, it turns on automatically, so I can't even properly reset that to see if it is the issue. Is this probably a power supply issue?
Actually, in case this information helps... The computer went into sleep mode the other day, and would not come back. This is a work computer that I use for our photography business, and at this point I am just trying to run it as a drive to get the photos onto our new computer, but this issue is keeping us from doing so. Any help would be greatly appreciated!Try a SMC reset.
DALE -
I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
How do i delete debug menu that pops up when i hit the power button
How do I delete debug popup when i press the power button?
Hi ann_ring,
You should look at the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. That should give you what you need. Firefox probably can't save the setting saying that you've already seen that box.
Hopefully this helps! -
My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?
Hi..
Try Resetting the System Management Controller (SMC)
If that doesn't help, try Troubleshooting MagSafe adapters
When you post, please tell us which Mac OS X you have installed. Thanks -
MacBook wont start and beep "S-O-S" when I push the power button
My wife's MacBook suddenly quit. Was working fine one day and dead the next. Screen is black. No keys work. Light on charger is green, so battery seems to be charged. White light on front is steady and not pulsing as it normally does. When I press the power button the computer beeps S-O-S in Morse code. What's wrong? Can I fix it myself? Can the Genius Bar fix it or is it dead for good? I'm sorry, I don't know what OS it's running (because it won't turn on ...) Thanks!!
Your MacBook definitely needs service. Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.
-
Hi, when I press the power button on my MacBook nothing happens and it is driving me crazy If anyone knows how I can fix this problem, I will appretiate it very much
Thank youTry an SMC reset, which can often fix that: http://support.apple.com/kb/HT3964 . Note as you scroll down, there are two sets of directions for MacBooks, depending on whether you can remove the battery or not.
-
My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!
You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac
Maybe you are looking for
-
I want to import my Power Point files (.ppt and .pptx) to my iPad via iTunes. I open ppt file in iTunes keynote file sharing than I run keynote and select copy file from iTunes. But it will jump to the home screen half way through and keynote close
-
Different stock value for accepted and rejected material in quality
Hi, when we send the final product in quality ,some material has accepted and some material has rejected But system is showing the value of both accepted and rejected same. But we want that the value for both should be different. How we can get it Re
-
Electronic payment file format
Dear all, one of our customers needs to transfer payment files via MT101 (= RFT) to a swiss bank. According to the documentation there are only formats like DTA, EZAG, ISO20022 available for bank transfer. Does anyone of you have further knowledge or
-
My photoshop elements 12 shortcut isn't opening on my desktop. It was fine just moments ago. I can't open any of my edited pictures. I have HP envy
-
Where can I find an Airport Adapter Card?
Hello again! Just like the topic asks, ... any thoughts besides ebay? Thanks. Jacobo