HT201177 How can I resolve the HDCP issues when playing 1080p video via HDMI to my HDTV?

Palying back any video (iTunes 1080p purchase, Netflix) via the HDMI port results in screen issues on my HDTV. FLickering, odd noises, etc. I did get a HDCP warning but my TV is HDCP compliant. Any ideas? Thanks.

Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Similar Messages

  • TS3694 how can i resolve the issue of this error 1015?

    how can i resolve the issue of this error 1015?

    Google it. You can not get help for your jailbroken phone here.

  • How can i resolve the -1 error occuring during the iphone restoring process.

    how can i resolve the -1 error occuring during the iphone restoring process.

    hi ive also got the same probblem ive had it working last night but then after 2 hours of working it decided to put the phone back into recovery mode plus its an unknow error (36) Ive tried to connect to i tunes and it started to recovery and wipe the to put it back into factory settings then came up with the error 36  can any one help

  • How can I reset the security issues if I have forgotten them

    how can I reset the security issues if I have forgotten them

    http://support.apple.com/kb/HT5312
    If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com.  Clicking the link will send the reset to your rescue email address (NOTE:  This is not the same address as your Apple ID email)
    If there is no link on the page, then you didn't establish a rescue email address.  Contact AppleCare at 800.694.7466, and ask for account security.  You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
    HTH

  • How can we change the security issues if no backup e-mail address?

    how can we change the security issues if no backup e-mail address? I've tried a lot of time and I really don't know how....

    Contact Apple Support to have your security questions reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • Cant do facetime it rings and when you accept call drops. How can we resolve the problem

    I can do face time ! It rings and when i accept the call or they accept it the call drops..how can we resolve the problem.

    Read this KB article.
    http://support.apple.com/kb/TS5419

  • I have already downloaded the ios 7 but cannot access the iTunes Radio from the music app. There is no iTunes Radio icon at all! How did that happen? How can I resolve the problem? Please help. Thanks!

    I have already downloaded the ios 7 but cannot access the iTunes Radio from the music app. There is no iTunes Radio icon at all! How did that happen? How can I resolve the problem? Please help. Thanks!

    It didn't show up in my music app for several hours.   Don't know why... But it's there.
    I can now access and add stations through the iTunes Store to play through music app icon.

  • How can I interrupt the blocking call when call timeout?

    Hi,Guys
    I wrote an application server(daemon process) to talk with oracle server
    continuous which used oracle9 OCCI lib, each 5 min it executes the procedure
    on the DB server.
    Now I have come cross a problem:
    If the network is blocked, app server will blocked at occi call and would
    never pass, and no exception was catched :-(
    for e.g.
    1. Oracle server reboot without shutdown oracle process
    2. udp broadcast message storm blocked the connection between app server and
    oracle DB.
    I consider maybe it's because OCCI using the blocking mode of connection
    that caused this problem.
    How can I interrupt the blocking call when call timeout?

    Manage the timeout using a separate thread. When the timeout happens, issue a break on the OCCI connection. There is no direct way as of now. You need to do this to break a OCCI connection.
    retrieve the OCI handle from the OCCI handle (e.g. using Connection::getOCIServer or Connection::getOCIServiceContext methods) and issue a OCIBreak on it. Do not forget to allocate a error handle which should be passed to OCIBreak call.

  • How can i change the type of letter in my video??, how can i change the type of letter in my video??

    how can i change the typoe of letters in my video? from arial to calibri por example

    http://help.apple.com/imovie/#mov3a621837

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • How can I see the photos of iPhoto in a TV  via Air Play ?

    how can I see the photos of iPhoto in a TV  via Air Play ?
    I have a MacBook Pro ( dec 2010) v. 10.7.5

    Clodo9, thanks for your response, but a "thunderbolt", or "mini-display" port is different from a lightning port. Old Toad found a solution:
    Old Toad Toad Hall, Temecula CA
    This solved my questionRe: Is there a Apple Lightning to HDMI adapter? 
    Feb 26, 2014 6:33 PM (in response to vburger)
    Did you check the online Apple Store? I found this: Lightning Digital AV Adapter - Apple Store (U.S.)
    OT

  • How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

    How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

    Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud.  You can find more details at Lightroom and Creative Cloud FAQ.

  • How can I stop the intro voice when I play a genius mix

    HOw can I stop the intro voice when I play a genius mix?

    Hi Diavonex. Yes I was aware of this option.
    Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
    This is much more readable in the car in bright light, and much better at night too.
    You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
    Although this app is really only an interface sitting on top of the music app, it offers a much better experience
    in my opinion that the stock player which seems to have devolved rather than evolved.

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

Maybe you are looking for

  • Access Denied while trying to delete document

    In SharePoint 2013, if the user ONLY has contribute access to a library, (user does not have access to the site) and if the user tries to delete a file, it throws an error message. Access Denied: You do not have permission to perform this action or a

  • Main scenarios in SAP XI in a business environment

    Hi, I am a starter in XI and would like to know ..what are the different scenarios that we come across in a real time environment while working with sap xi. Help will be greatly appreciated... Thanks in advance, vas

  • D-Link DCS 900W - how to get it to work on my Mac?

    i'm new to network cameras - but i need to set up a surveillance system in my home to monitor my home while i am away. i recently returned a D-Link DCS 950G because this latest model didn't work with any other browser but IE6. Now i've got a DCS 900W

  • Re: Starting WLS 5.1 SP9 w/ JDK 1.3

    SP9 ships a new (compatible with JDK 1.3) version of wlconfig & wlserver.exe Pls see SP9 release notes. kumar James Nuzzi wrote: Hello, I have seen a lot of posts about this error, but I cannot find a solution to my problem. I am running WLS 5.1 SP9

  • Pb after migration which backslash

    i have migrate from a HTML DB 1.6 on W2K to a APEX 3.0.1 on AIX. after that, some images doesn t display anymore due to wrong path using backslash instead of slash, e.g : /i/themes\theme_transfert\arrow_down.gif was not found on this server instead o