HT201177 My thunderbolt connection video works,  but no audio on HDTV.

I bought a connector and set up on my HDTV to my Macbook Pro and the video is great. But no audio.
thx

try connecting the appletv directly to the tv
if that works then
the dvd is incompatible

Similar Messages

  • AVI Video Working But No Audio

    I recorded some live video off of a news site with the software Bandicam (www.bandicam.com) and it records as an AVI file. Whenever I try to edit them in Adobe Premiere Elements 11, the video shows up in the timeline but there is no audio. The audio is either silent or all muffled.
    Is there anyway I can fix this problem or will I have to buy  video converting software?

    iPlana96
    When all is said and done, I am guessing that your video compression is MPEG-1, Xvid, or MotionJPEG, wrapped with that .avi file extension. The audio compression is probably either PCM or MPEG1 Layer II audio. I gathered that information from a web site that described the Bandicam software that you say that you are using. It is talked about in some circles as a Fraps alternative. From what I have read about Fraps, its video typically needs conversion to move forward with any type of video editing of it.
    Can you confirm whether or not your video can be edited in Windows Live Movie Maker?
    http://www.bandicam.com/faqs/how_to_edit_recorded_streaming_video/
    What are the complete properties of your video?
    Thanks.
    ATR

  • I have an iPad3, recently updated the ios to 6.0.1. Since the update I cannot connect to wi-fi at my house. I am able to connect at work, but not at home. I have changed routers 3 times, have reset, uninstalled and re-installed, and everything I can think

    I have an iPad2 and recently updated the ios. Since the update, I cannot connect to wi-fi through my router. I can still connect at work, but at home it will just not work. I have tried everything I can think of. I have reset, uninstalled, re-installed, and changed routers. 3 times. I cannot get it to work. Does this have something to do with the update? I have even reset the network settings, and restored the ipad itself to factory default settings. Can anyone help me?

    Try and "Forget This Network"
    Settings>Wi-Fi>tap little arrow on right of network.
    http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg

  • Video plays but no audio. Help!

    I have a 2011 MacBook Air with the proper configurations and Mountain Lion. I am trying to take an online course. The video plays but no audio.  I have tried all the suggested fixes, but nothing works.  Everything else works on my computer with no problem.  I need help fast.  Any ideas or known issues?

    Sorry, I read the forum rules . Thanks for the reply, but I haven't actually updated the Nvidia drivers in a while. Right now they are on 311.06. I keep them at the stock clock speed as well. Also have a slightly overclocked i5 2500k. but that never effected Adobe products before.
    I wonder, does VLC Player at all affect clip playback? I think I saw there little traffic cone.
    Yup. Is PP CC using VLC instead of Quicktime? And/or would that have an effect on playback? Also how would I correct that? I imagine uninstalling VLC would.
    Well, I uninstalled VLC, and now the Quicktime logo shows up just before the thumbnail loads instead of the VLC logo. I'm gonna assume that means that PPCC is using quicktime, but I STILL get no video in preview playback!
    Starting to get frustrated.

  • How come when I view flash videos my videos stop, but the audio plays  and I see rainbow colored lines up and down the video.

    How come when I view flash videos my videos stop, but the audio plays  and I see rainbow colored lines up and down the video. I attached a image below.

    ATR, just to make sure you understand me, all my video clips in my folders appear as the first frame of the video clip when I view my folders as (small, medium, large)icons instead of lists, when saved as .avi files but when saved as .mp4 files, those icons display as a graphic icon of filmstrip with a musical note on it. I do have various other methods to open with (quick time, windows media, winamp or real player) but prefer real player because I like it's quick and easy trimmer that comes along with it, since so many of my videos are just pet antics where you need to clip off the boring beginning and ends of the video.
    I did go on a few of the icons and right clicked, Open With, and tried quick time and also Windows Media and it did nothing as far as how the file was saved for display, and they opened the same no matter which player I used...the actual video opens and plays right at it's first frame... but it's the way it is visually displayed in STORAGE that bugs me because it isn't immediately apparent to me what it is a video of (weddings, outside the house, pet antics)... it makes me have to actually title things and read titles where before I let it just be dates because I had the visual of that first frame as a reference. Obviously, this is a problem for unedited videos only, as anything I actually work with, I do give a title along with the date of the video.
    I also just realized this seems to be the way ALL videos that are wrapped in .mp4 are displayed, as my bloggie camera's videos appear the same way. Now I know why! My other videos display as .avi's so I see the frame. Puzzle solved. Guess I'll just have to learn to live with it, as it seems to be how things display with the various formats.
    Now I need to watch some tutorials to learn how this Premiere program works! It's all new to me, since this is the first time I've been able load any of my videos onto it. I haven't even been able to figure out how to trim on it yet!

  • Using time remapping w/AE CS4  to freeze time/video freezes but not audio

    Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

    Hi,
    I'm also having the same problem with CS4 version.  I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound.  The whole clip is just over 2 mins and I don't have any effects at all.
    Does anyone know how to solve this please???
    Cheers!
    Shan

  • Audio in is working, but no audio out on internal speakers (with or without headphones.)

    Audio in is working, but no audio out on internal speakers (with or without headphones.)

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Best.

  • I was having problems with video and audio on certain sites like youtube. I edited some settings in Realplayer and have video now, but no audio.

    Went into preferences on Realplayer, Download and recording, then unchecked "Enable Web Downloading and Recording...". That got video going, but no audio still. (Interesting that the list of browsers below that check box did NOT include Firefox.

    See:
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    You can also try to clear the Flash local storage and settings.
    *Windows Control Panel > Flash Player, click Delete All and Delete Data
    Flash Website Storage Settings panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    Global Storage Settings Panel:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
    Did you also check the setting in the volume mixer when Firefox is using the flash plugin?
    *https://support.mozilla.org/kb/No+sound+in+Firefox

  • HT4199 My iphone has always connected automatically without problem to the wifi network at work, i.e.BTBusinessHub, and at home, i.e.Bthomehub. Now it tries to connect at work but doesnt manage it although it still works at home. Can anyone advise why?

    My iphone has always connected automatically and without problem to the wifi at work i.e. BTBusinesshub and at home BTHomehub but yesterday it would not connect at work. It is ok at home but again today at work it is not connecting. It appears to try but is not connecting, please help.

    You can try doing a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up - then check wifi - if that doesn't work then
    do a network reset note:  you will have to reenter wifi password again when your in range.
    settings - general - reset - reset network settings.  If that doesn't work then I would talk to your IT dept.

  • Isight video ok, but no audio

    Am trying to record in to imovie 9 from mbp. The video works fine, but I get no audio. Checked all settings, system preferences, the internal microphone works in imovie, I can click the microphone icon and get the audio bars for voiceover, but they disappear when I click the camera icon, and I get no audio.
    Amazing how Apple can make something that should be so simple in to a one hour troubleshooting exercise in futility.

    rugger wrote:
    Am trying to record in to imovie 9 from mbp. The video works fine, but I get no audio. Checked all settings, system preferences, the internal microphone works in imovie, I can click the microphone icon and get the audio bars for voiceover, but they disappear when I click the camera icon, and I get no audio. ....
    (1) If QuickTimeX works to record both video and audio correctly, quit all applications. Then throw away your iMovie Preferences file (com.apple.iMovie8.plist) from your Home (user) / Library / Preferences folder.
    A new preferences folder will be generated when you restart iMovie to test whether iMovie properly records audio now, but you will need to reset any preference settings you want different from the default values.
    (2) If you are using File Vault, turn it off or see http://support.apple.com/kb/TA27532
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Video plays but the audio skipps

    i recently downloaded a tv show and i started to watch it and the video is fine but the audio skipps.i tryed playing it in quicktime but it does the same thing.
    custom   Windows XP  

    First reinstall quicktime here http://www.apple.com/quicktime/download/standalone.html
    If that does not work then contact the music store if you bought it from there. it may be a issue on there side with a bad file
    http://www.apple.com/support/itunes/musicstore/download/

  • Audio Line-In apparently working, but no audio out

    Hi, A similar problem to the below post of "external mike not working", but, well, different.
    I'm attempting to start recording some of my old vinyl. I've run a stereo mini-plug into the audio line-in from my stereo amplifier. I've selected the audio line-in on the sound preferences, and I see the signal input levels respond accordingly. BUT, I get no sound output either on internal, or external speakers (through the headphone port)
    The signal is from the turntable (or whatever source I choose) through the amplifier Tape 2 REC line to the computer input port, so it is adequately boosted (as evidenced by the signal levels)
    Is this normal? What am I doing wrong? AM I missing an additional setting somewhere?
    Thanks.
    G4 Mac OS X (10.4.10) 1.25MHz Powerbook
    G4 Powerbook   Mac OS X (10.4.10)   1.25 MHz

    Here's the explanation. The audio line input is not connected to the audio output - this i as it should be.
    What program are you going to use to record? Whichever program you use should have a setting for where to send the monitor output. In other words, it's the program's responsibility to take the input and send it somewhere for monitoring.
    Try fiddling with Garage Band to see how this works.

  • Headphone jack is working but no audio from laptop all drivers upto date

    hi , my audio from headphone is working but there is no audio from the laptop itself, i have downloaded and updated all drivers, audio driver is conexant hd smart audio 221

    Hi @SNJY ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv9730us Notebook and not playing sound. Here is a document on troubleshooting sound. Please remove the headphones for troubleshooting.
    Here is another step to try.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok 
     A windows update KB2962407 could have caused the no sound. Open windows Control Panel, open Windows Update. Right click it and select Uninstall.
    Hope this helps resolve the sound.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HTML video works but not when publishing in MUSE

    I threw this together without using MUSE - Just a test video that I made in Dreamweaver.  The reason why I'm posting this in MUSE as well as DW forum is because maybe I'm not doing the "5" code correctly.  anyway --:
    http://designerandpublisher.com/html5/video.html
    the HTML5 video above plays great on my desktop as well as on my mobile device.
    So now, I opened up MUSE and made a test phone web page.  I embedded the necessary HTML5 code.  The video plays fine on my desktop but will not play at all on my mobile device (Galaxy Note ii).  It seems to start, then freezes, then craps out.  Here it is:
    http://designerandpublisher.com/hawaii/mobile/
    What I can't understand is why am I am all of a sudden having problems with MUSE playing video files made for mobile when the original DW test I made works perfectly?
    Please advise.

    the OGV and WEBM files work fine in the first test.  those files are also present in the 2nd test, so why isn't the 2nd playing like like the first one?  as for the FLV that's something i can do for mozilla but my main concern is the playback issue with the MUSE test - all works fine in the first example but not in the second.

  • Printer connected, printer works, but won't print from Mac

    I'm helping someone with a printer problem, and I have a mystery on my hands.
    The printer is connected (directly), shows up in the printer list, can print a test page, but won't print any document from this computer (it's fine from my laptop).
    It's a Mid-2011 Mini, 2.3Ghz, running 10.7.5. The printer is an Epson WF-2540.
    This is a USB printer, connected directly to their Mac.
    In "Settings", when you select Print/FAX and print a "Test Page" - Success! This is a process that invokes the Epson Driver directly [and bypasses the MAC print queuing mechanism]
    When "Printing" from within any application (firefox, TextEdit, winders...)   The job starts to queue, but errors before engaging the printer.
    R & R the Epson Drivers,  Clear the Printer "stuff" on the Mac, Reinstall drivers from the Epson website, Mac wants to update the "newest" Epson Drivers (kinda' funny when I think about it...).
    Still errors.
    I attached directly to a USB port on my MacBook Pro.  Download drivers, etc..  Works like a champ!
    We have deleted the printer from System Prefs, rebooted, and added it back.
    We have even gone into Terminal and...
    sudo bash
    cd /etc/cups/ppd
    ls
    found EPSON_WF_2540_Series.ppd
    cp * /var/tmp/
    ls /var/tmp/*.ppd
    rm /etc/cups/ppd/*
    Still doesn't work.
    Anybody have any suggestions?

    Hi, it's not clear... did you Rest the Printing system on the Mac?
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

Maybe you are looking for