HT201177 Problem with standby

I have a new MacBook Pro 13-inch retina display. I usually do not switch it off but simply close the lid. The other day I noticed it became extremely hot when I did this and the fan was running. I opened it but it did not turn on until it cooled down. Could this be because of an open application? I have Bitorrent installed.

Yes. Quit Bitorrent before putting your Mac to sleep.

Similar Messages

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

X200 Ultrabase problems with Standby and Hibernate

My system (x200) hangs on standy or hibernate when docked. Off the dock everything works fine. I am running XP with all the updated drivers (at least the update utility says so). Anybody else have this problem or know the solution?
To put it another way: Is the Ultrabase ACPI compliant? Does anybody hibernate succesfully while docked?
Message Edited by lomonosov on 07-20-2009 03:50 PM

After updating Vista Business, Bios and Driver which took several hours, Lenovo changed the Ultrabase within one day.The probleme with sleepmode, hibernation and shutdown has gone until I plugged the DVD drive into the Ultrabase!
Could you confirm that the X200 could go into hibernate- or sleepmode with or without DVD drive?I now will open a new ticket at Lenovo for change the DVD drive.

Problem with a Standby Database

Hello,
if have some problems with a special standby database. why special? because i try it whit another, which was newly build with oracle tools and everything works. I mean the redo log transfer and the log apply and everything.
At first I try to use the DGM, to guide me through the process, but this manager didn't start to copy anything of the database files. So I make an offline backup from the database as you can see in the oracle data guard doc. later on I used the DGM again to build a data guard configuration. Everything seems to be fine. But then I get ORA-16778: log transport service for some site has an error AND ORA-16766: physical apply service unexpectedly offline.
I don't know what to do now. I really try to help myself but it always stop at this point.
By the way ... merry Xmas!!!

Hi,
ORA-16766: physical apply service unexpectedly offline.You must check in the alert log why the MRP is going down, the info is in this file.
In order to get more comments, give us a "snapshot" of your install:
. Release
. Configuration
. Folders structures
. init file (pfile/spfile) contents
And paste the MRP error stack from the alert log.
Regards,
Yoann.

Problems with second standby database

Hello All,
I have oracle 10gr1. 1 primary db and 2 physical standby and 1 is in the same network with the primary and the other is on a remote network. The primary and the standby on the same network is working perfectly well. My problem is with the remote standby. Some log are not being archived. See output below
SEQUENCE# ARC APP
1755 YES NO
1761 YES NO
1772 YES NO
1774 YES NO
1782 YES NO
1789 YES NO
I get this error RFS[10]: "Possible network disconnect with primary database". I think it has something to do with the network connectivity of my second standby and the master db. What parameters should I tweak to avoid this?
Another thing is arhived logs from seq 1728 were not being applied. I tried manually recovering the archive log from 1728 but it says there is an error in the log. I tried getting the specified archive log from the master db and tried recovering it manually but still the same. How would I solve tjhis problem? Would rebuilding the second standby do the trick? Help needed badly.
Thanks in advanced.

Hi,
About seq 1728, if the archive has been lost or alterred, you'll have to rebuild the standby. At least take a backup of the first standby and restore the datafiles at the second standby.
About network connectivity, are you using DataGuard? If so, did you setup the FAL (Failed Archive Logs) server/client parameters on your standby? You can even set your fal_server as being both the primary and first standby..
You should investigate the network connectivity problem with your network administrator. Check alert log and trace files plus sqlnet logs to see when/where/why the communication with distant site fails sometimes.
HTH,
Yoann.

Problem with Active Standby Pair

Hi ALL!
I have a problem with Active Standby Pair replication.
I have 2 instance TT on host1 and host2
On host1 i created 2 data store rep1 and rep2
On host2 i created 1 data store t1
ALL data stores identical, and have one table REP_TAB.
AFter this i work with rep1 ds:
Creating active standby pair:
create active standby pair rep1 on "host1",
t1 on "host2"
subscriber rep2 on "host1"
store rep1 on "host1" port 18000 timeout 30
store t1 on "host2" port 18000 timeout 30and starting repagent
call ttrepstart;After this i try using ttrepadmin utility and ALWAYS GET this error
C:\Documents and Settings\user1>ttrepadmin -duplicate -from rep1 -host "host1" rep4
Enter password for 'tt':
TT12048: Error performing backup at source. More information can be found in th
e source's message log
TT7001: REP1:receiver.c(4979): TT7001: User authentication failedPasswort right. I dont know what i am doing wrong? Please Help!

Did you enable Access Control in this instance when you installed? If so, have you created the relevant users in the TimesTen instance?
If you have access to Metalink you may find Note 421220.1 useful in clarifying this process, and also for avoiding other problems you may encounter after performing a successful duplicate.

T60 - Standby problems with long in activity

Hi All,
Hopfully someone can point me in the right direction with a issue i'm having with one of the T60 Thinkpads.
Here's the run down:
We brought 3 T60's (type 6369-A56) last december (online web sale). 1 of the three is displaying problems when dealing with standby mode. If the laptop goes into standby mode for longer than anywhere between 30mins to 1hr the laptop doesn't resume from standby when you either open the lid of the laptop or use the Fn function key. When either action is taken to bring the laptop out of standby mode the cresent moon LED remains lit, the HDD LED lights up for a breif second and then turns off, the power indicator turns on and say's solid, the screen remains blank at all times. When this happens you can hear/feel the HDD spinning up and doing something and you can also hear the processor fan spin into action as if it were coming out of standby. Having mains power doesn't seem to make a difference with this problem.
I've already spoken to Lenovo support RE this matter and they believe it is a software related problem. I've done some further testing to try and determine that, this is what I've done...
I took a Norton Ghost image of one of the 2 working T60's HDD's (standby works perfectly on the other two laptops) and used that Image to ghost the HDD in the faulty T60, this gave me two Identical laptops (hardware and software). The power scheme for the laptop is as follows, Turn off Display @ 5mins, go into Suspend Mode @ 15mins. I left both laptops alone at exactly 9:05, 5mins later the screens when blank, @ 15mins later both went into standby mode. 45mins after standby mode had kicked in I came back to both laptops and used the Fn key to resume the laptops(at the same time) and the faulty T60 didn't come back from standby and the same symptons as mentioned eariler happened.
After that happen I decied to see what would happen if I switched the HDD's between the laptops (hdd from faulty laptop into the working laptop, hdd from working laptop into faulty laptop). After switching the HDD's over I ran the same tests as above. Again 45mins after standby mode had been active I used the Fn key to resume from standby and the laptop with the hdd from the faulty laptop worked straight off the batt, however the hdd from the working laptop in the faulty laptop displayed the same problems as mentioned above, thus ruling out the software as the cause of the problem.
My question is, knowing all of that, where is the issue likly to be? Is it going to be RAM related or board related?
Is the likley outcome going to be returning it to Lenovo for repair?
Cheers
Chris
Solved!
Go to Solution.

Thanks Cedric,
At the time the tests were done, both were using battery power (levels were as close as ai could get them at the time, but they were around the 85% mark when the first test was carried out), however as mentioned in my OP the problem is still there when using Mains or Battery power.
Hibernation is disabled on both laptops (it was disabled before I created the Ghost HDD Image, I have checked that both still have it disabled)
Just to satisfy your curiosity, the faulty T60 already had the latest BIOS updates installed as apart of some intital testing that I had performed (its running System BIOS version 7IET32WW), however the working laptop was running the previous version. I've since updated that system and both are now running the same version.
Since upgrading the BIOS so that they both match, I decided to Load BIOS defaults (F9) with only 1 change (that change is to the SATA Mode from AHCI to Compatibility) to both machines.
I ran the same tests as before, but this time using mains power and the problem is still present on the original laptop displaying the symptoms. There also seems to be a second issue which is related to this problem, if i shut the laptop down and try to reboot 9 out of 10 times i get the following message:
Windows could not start because the following file is missing or corrupt:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.
Select 'r' at the first screen to start repair
No sometimes I can restart the machine again and it will boot into WindowsXP, however most times I cannot. And a repair will resolve the issue but not always.
In regards to any BIOS settings, there aint that many options in the bios that deal with power management (nothing that I can see that deal with standby mode), whats the problem you've seen with the hibernate function?
Cheers
Chris

K8t Neo2 problem with resume from standby after BIOS flash

Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail. Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby. The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way. Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%. The only way to get it back down to normal again seems to be to reboot. By Contrast Hibernation works fine, with no increase in cpu load after resume. I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers. Any ideas what is going on?

Noticed last night that S! standby seems to work OK. Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem). The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem. However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present. This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it. Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

HT201177 hello i have a problem with my macbook pro

hello,i have a problem with my macbook pro its graphics are not doing gud its getting struck when iam moving to a diffrent desktop,so can u kindly tel me a solution to the problem

Check to see how many programs you have open. CMD +Option + ESC buttons and maybe force close programs you aren't using. Remember the "red x" does not completely quit out of the program, to quit permanently use the drop down menu up top, click "application name" from drop down and than go to Quit "application name".

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed

Restore Log with Standby Mode on Virtual VHDX disk cause a 9004 error in SQL Server 2014 ( test performed on Web edition and Standard version )
Similar Bug for SQL 2008R2 is already registered with number hotfix
KB2987585
Restore operations always fail in Hyper-V R2 Server in situations ( text copied from
KB2987585 page )
The primary database has its transaction log file (.ldf) stored on a disk that has "Bytes per Physical Sector" set as 512 bytes.
You take the transaction log backups of this database, and then you try to restore it by using the standby option on the secondary database.
The secondary database transaction log file (.ldf) is located on a VHDX disk that has "Bytes per Physical Sector" set as 4,096 bytes.
In this scenario, the restore operation fails and returns the following error message:
Error: 9004, Severity: 16, State: 6.
An error occurred while processing the log for database '<databasename>'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
After this error occurs, the secondary database goes into a suspect state.
So restore from Generation1 to Generation2 machine ( where only VHDX disk is possible ) always fails and database is not accessible.
Please create hotfix for SQL 2014 version

Please create hotfix for SQL 2014 version
This is a community forum, no one of use can create a hotfix for SQL Server.
Raise a case at Microsoft Support or create an entry at MS Connect:
http://connect.microsoft.com/SQLServer
Olaf Helper
[ Blog] [ Xing] [ MVP]

Iphone 4 battery sometimes drains fast -- problem with Mail app?

My iphone 4 battery often drains too quickly, and I wonder if it has something to do with my Mail App.
When my phone is not playing nice, it drains at least 20% overnight while on Standby, and from 100% to 30% in around 6 hours when I use it during the day. I found a fix (http://discussions.apple.com/message.jspa?messageID=11775150) that basically says to wipe your mail account and set it up again.
This fix works, but only temporarily for me. I find that I have to keep resetting my mail every few days to get back to "normal battery" where it barely drains overnight. I only use one email account (gmail) -- could there be something going on there?
Oh, and when my battery drains fast, nothing changes when I turn off WiFi, notifications, push, etc. I usually have my mail refresh hourly.
Has anyone had this experience?

iulo wrote:
I believe this must be a major bug on iOS 4.
Sorry, it isn't:
New iOS 4.1 is a battery KiLLER!
iOS 4.1 drains battery
Battery Meter/Life Problems with 4.0.2
4.0.2 guzzling my battery. Your's too?
4.0.1 battery life
Battery runs out very quicky in iOS 4.0.1
Battery nearly nonexistant after 4.0 upgrade
Dead battery after few hours on standby using 4.0 software
3.1.3 battery problem
OS 3.1.3 battery issues
3.1.3 upgrade - shortened battery life?
Battery life cut after 3.1.3 update on iPhone 3G
3.1.3 Firmware is a battery killer - how do I back out this upgrade?
Poor battery life with iPhone 3G running 3.1.2
3.1.2 EXTREME battery drain - what gives?
3.1 Battery nightmare
iPhone 3GS with fw 3.1 – battery life gets even worse
Battery Issues with 3.0.1
BATTERY drain with 3.0
upgrade to 3.0 drains my battery
Battery Drain after Update 2.2.1
Battery Life Radically Decreased after 2.2.1 Firmware Update

Problem with archivelogs in a phy stb

Hi every body!
I want ask you about my problem with the archivelogs in a physical standby.
this standby works perfectly, but every time it recives a archivelog from the primary database, it generates another archivelog bigger than the it recives.
-rw-r----- 1 oracle dba 43314176 Mar 13 16:06 1_1794.dbf
-rw-r----- 1 oracle dba 52429824 Mar 13 16:06 1_1795.dbf
Those files are archivelogs. 1794 is recived from the primary database, and 1795 is generated by the standby, as you can see the 1795 is bigger than 1794.
when i generate another archivelog this is the result:
-rw-r----- 1 oracle dba 4290560 Mar 13 16:40 1_1795_637513013.dbf
-rw-r----- 1 oracle dba 52429824 Mar 13 16:40 1_1796_637513013.dbf
i generate 1795 in primary database, and physical standby generated 1796...
Doy you know the solution to my problem....
Thanks a lot for your time.

Yep you do have to down the standby database I'm afraid, do a shutdown immediate then a startup nomount then issue the alter database mount standby database; command. Once this is done run the below statements to recreate the relevant standby redo logs. See the below SQL for a syntax example.
ALTER DATABASE DROP STANDBY LOGFILE GROUP 4;
ALTER DATABASE DROP STANDBY LOGFILE GROUP 5;
ALTER DATABASE ADD STANDBY LOGFILE GROUP 4 ('D:\somepath\STBYREDO_GRP4_A.LOG','D:\somepath\STBYREDO_GRP4_B.LOG') SIZE 100M;
ALTER DATABASE ADD STANDBY LOGFILE GROUP 5 ('D:\somepath\STBYREDO_GRP5_A.LOG','D:\somepath\STBYREDO_GRP5_B.LOG') SIZE 100M;

Problem with logminer in Data Guard configuration

Hi all,
I experience strange problem with applying of the logs in DataGuard configuration on the logical standby database side.
I've set up the configuration step by step as it is described in documentation (Oracle Data Guard Concepts and Administration, chapter 4).
Everything went fine until I issued
ALTER DATABASE START LOGICAL STANDBY APPLY;
I saw that log applying process was started by checking the output of
SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
and
SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
but in few minutes it stoped and quering DBA_LOGSTDBY_EVENTS I saw the following records:
ORA-16111: log mining and apply setting up
ORA-01332: internal Logminer Dictionary error
Alert log says the following:
LOGSTDBY event: ORA-01332: internal Logminer Dictionary error
Wed Jan 21 16:57:57 2004
Errors in file /opt/oracle/admin/whouse/bdump/whouse_lsp0_5817.trc:
ORA-01332: internal Logminer Dictionary error
Here is the end of the whouse_lsp0_5817.trc
error 1332 detected in background process
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01332: internal Logminer Dictionary error
But the most useful info I found in one more trace file (whouse_p001_5821.trc):
krvxmrs: Leaving by exception: 604
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 68
ORA-06512: at line 1
Seems that somewhere the correct privileges were not given or smth like this. By the way I was doing all the operations under SYS account (as SYSDBA).
Could smb give me a clue where could be my mistake or what was done in the wrong way?
Thank you in advance.

Which is your SSIS version?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

HT201177 Problem with standby

Similar Messages

Maybe you are looking for