HT201177 when I start my macpro I hear the startup sound but them all that comes up is a folder with a "?" on it and the computer doesn't start.
Mac is not starting. A Folder with a"?" is all that comes up at startup.
http://support.apple.com/kb/TS1440
If running Lion:
http://support.apple.com/kb/PH4193
Similar Messages
-
As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
Anybody have any good advice?
I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?
The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.
-
When i press power button i hear several click sounds before start up?
When I press power button I hear several click sounds before start up begins. Shortly after Apple logo appears it clicks off.
Which MacBook Pro do you have? If it has an optical drive then that is just the optical drive checking if there is a disk inserted.
-
Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding thisWow. Lots of help. Thanks apple
-
Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate
Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.
-
When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help
Hey marleyrose,
Thanks for the question. I understand that you are experiencing issues with your MacBook. The following resource may provide a solution:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks,
Matt M. -
When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!
Hi Emma,
Thank you for using Apple Support Communities.
I understand that your Thunderbolt display is just showing a black screen when you boot your computer. The following article should be of help in troubleshooting your display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
Jeff D. -
I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements. -
My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!
I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner -
I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?
Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium -
Mountain Lion update, and now computer won't start up?
Writing this for a friend, as his computer is inop at the moment. Hence this message.
He has a new 27" iMac. He upgraded to Mountain Lion a few weeks ago, and then had intermittent problems with apps unexpectantly shutting down.
Now he did a ML update this morning, and his computer won't start up. It gets to the point of the Apple logo coming up, a progress bar, and then the spinning wheel, but then shuts itself down right afterwards.
A safe boot yields the exact same result.
Any thoughts out there on what he could try to get it up and running again?
Thanks much for any and all help.Thank you for the fast response.
He was able to get into Disk Utility with the Command and R keys, but when he tried verifying the disk, in red it said 'Invalid Node Structure, volume could not be verified completely'.
He went ahead and verified it anyway, then proceeded to repair it. Howver, it stopped repairing, said it cannot repair, and that he should back up files and reformat the disk.
How can he back up his files? He cannot see a way to do it. Is there anything else he can do besides having to reformat the disk?
This is his first Mac (after much prompting from me to go Mac), and he's afraid he's now lost everything on there. -
Unfortunately when I click on the Dreamweaver icon to open all that happens is the Dreamweaver logo flashes on and off and nothing more happens. In addition looking at my folders all the web pages in Dreamweaver have gone and all that I can do is open them in a browser, Runs on XP?
Unfortunately when I click on the Dreamweaver icon to open all that happens is the Dreamweaver logo flashes on and off and nothing more happens.
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache. Be sure to turn on Hidden files & folders in your Windows Explorer.
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.
Maybe you are looking for
-
Photo sync leaving gallery on phone in a mess
Hi, I am trying to move some pictures to my Nokia 5230. I have downloaded and clean installed the latest Ovi-suite. I have connected the phone and chosen pc-suite data transfer mode. I then synced the photos between the PC and the phone. In Ovi-suite
-
HTMLDB 1.6 and "order by" in analytic functions
In HTMLDB 1.6, oracle 10g, when i enter the string "order by" in the region source of a report of the type "sql query (pl/sql function body returning sql query", I get 1 error has occurred * Your query can't include an "ORDER BY" clause when having c
-
Photoshop open but won't show...
I was in the process of using Photoshop today, when I clicked the scrollbar, and the program suddenly disappeared as if it had closed. The program still appears to be open on the dock, but no amount of clicking will make it show. When I ctrl-click th
-
Am I missing something simple? The research I've done all say that reading cdata from an xml in flash is easy, so they don't explain how. Here's my problem. Node looks like this: <DDATE> <#cdata-section>2007-06-19 14:38:58.0</#cdata-section> </DDATE>
-
How to convert Ms Word (.doc) file to Protected pdf
Hi all, Is anybody out there could help me on how to convert Ms Word (.doc) file to protected pdf file using java? May be there are some jar file I need to download or any tools you used before? Thanks in advance... =)