HT201178 What happens if the light is solid and then blank

My apple wireless keyboard I got 1 month ago and I dropped it yesterday and the light just stays green then nothing it will not connect with anything

Hdello:
After a brief period, the light does go out (normal).  However, dropping it might have damaged the device.
Barry

Similar Messages

  • What happens when the light goes off on an express airport router?

    I was on the internet using a wireless connection with an express airport and suddenly I heard a sound and the light on the router went competelly off.  I would like to know what happened.  I unplugged the airport and plugged in again on another outlet but nothing happens.  The airport has about 3 or 3.5 years.

    It's not possible to know exactly what happened within the AirPort Express unless you carefully saw the case open along the seams to examine the internal components.
    It's likely that something in the power supply section has failed since the device will not power up. Repairs...if possible.....would likely cost more than the cost of a replacment Express, but if you are handy with small electronics repairs, you could poke around a bit to take a look for something obvious.

  • HT1407 what happens if the light doesn't cut on when you put it on the charger?

    What happens if light light doesn't come on when you put it on the charger, but it works on the computer? What does that mean?

    Some basics please, what vintage is your MBP, have you plugged anything else into the wall socket to verify that it is live? which light doesn't turn on, the charger or the MBP?
    Hold the power button down for 15 seconds, wait for 2 then press it normally and see te MBP it turns on

  • What happens between the timestamp 'Date Sent' and 'Execute from'

    Hi all,
    from SXMB_MONI, I found that some messages take a long time, for example:
    Date Sent            23.09.2008 02:22:39
    Time Taken to Process (Secs)    0,5044590
    Execute From         23.09.2008 02:23:12
    To                   23.09.2008 02:23:13
    Status Set           23.09.2008 02:23:13
    you can find that there are about 30s between the 2 timestamps.
    does anybody know what does the timestamp 'Date Sent' mean? and what does the 'Execute From' mean?
    what happens between these 2 timestamps?
    Regards,
    Bean

    Hi,
    I can't find date sent there...
    Executed from and executed to means times, where message went in to IE and out from IE. For example, if any error occurs, there can be difference 2 days (mapping fails, you correct it and restart the message). So the start will be at 21.10.2008 but end 23.10.2008). But generally, this time comrpises:
    message routing & mapping
    Olian
    after list all of the messages in SXMB_MONI, click the column 'EndTime', you will find the 'Date Sent'.

  • What happened to the Get/Set Date and Time utilities from RT 7.1?

    I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites  call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

    In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
    This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

  • What happened to the Droid Turbo Link and where is the Sony xperia Z3v?

    There was link for the new Droid Turbo and now it is gone.  Does that mean they are having problems with phone and want to hide it?  Is there going to be a Sony xperia z3v link also?  I am trying to decide between these two phones and knowing the problems of both (if any) helps me to make a decision.   Thanks

    Davidoo You can also find a picture & Link to the Droid Turbo on the main Paige of the Forum under  Featured Places  but why it was pulled from it's Original is past my knowledge on here.. Hopefully it will return
    Just Forgot they Done some Maintenance on the Forum the other day that could be why it Vanished.. 

  • What happened to the Light Room red screed import problem thread?

    I was about to purchase Light Room to use with my elements 11 and found this thread very interesting. Where did it go?

    big sandy lake
    I have just added some findings on the red frames of the .mp4 slideshow from Lightroom 5.4 Slideshow Module, as seen in Premiere Elements 10 Windows.
    http://forums.adobe.com/thread/1453087?tstart=30
    I can confirm the red frames seen in Premiere Elements 10 by LarryER when he edits his .mp4 slideshow (1080p .mp4 Lightroom 5.4   Slideshow Module).
    But, I do not see this in Premiere Elements 10 when I am editing my own .mp4 slideshow (1080p .mp4) created in my tryout Lightroom 5.4 Slideshow Module.
    ATR

  • What happened to the F-Security Toolbar and Google results check?

    The previous version of Firefox allowed F-Secure to activate a toolbar for checking websites and reporting suspicious ones. Also, it allowed F-Secure to rate google search results in terms of their safety to visit. These features do not seem to work in Firefox 4. Is there a way to fix these problems and if not how could I roll back to my previous version of Firefox?
    Thanks

    for a certain reason the F-Secure toolbar suddenly works with Firefox 4 on my PC. I donk't now why, but it suddenly works today. the last days i've had the same problem as alex45. Maybe it now functions with you new firefox 4 browser, too. It's very strange, because there was not an update for the new browser, at least I've had not noticed any updates. Maybe it's F-Secure with its automatically update?

  • What happens to the open item in bsid table when it is cleared

    hi experts,
                   i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

    Hi,
    When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
    If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
    Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
    This trasaction can be used for both partial and complete payments.
    Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
    BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
    So all open and cleared documents will be there in BKPF and BSEG tables.
    All cleared documents will be there in BSAD table.
    Alll open documents will be there in BSID table.
    Hope it is clear.
    Thanks,
    Vinod.

  • Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?

    Hello!
    I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
    Thank you!

    Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.

  • What happened to the youtube app and why does my ipod keep crashing?

    I updated my ipod touch 4g to iOS 6.0 and what happened to the youtube app? And why does my ipod keep on crashing when ever I go to the app store? Now i can never buy anything!!! or watch youtube videos and I'm always on youtube!!!!!!!!

    As has been very well publicized in the news and all over the internet and forums, youtube is not part of ios 6.  Google it.
    You can get the app from the app store if you like.
    Have you tried the basics from the manual to stop the crashing?
    Restart, reset, restore.

  • Hello, I have a Macbook Pro 17'' 2.4 GHz Intel Core i7 (2011). I dont know what happened but the pixels on black or dark areas on my monitor are displayed in a flickering red color, and on white areas are light blue. Any idea??

    Hello,
    I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
    Anyone with the same problem or solution?
    This is how it looks like:
    Thanx

    Is that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?

  • HT4262 I moved my airport express and now the light is solid orange.  What is wrong?

    I moved my airport express and now the light is solid orange.  What is wrong?

    Solid amber is an indication that the AirPort Express has locked up, or that an internal electrical component has failed.
    Power off the Express for a few minutes, then power it up again. If the solid amber light persists, the next step would be to perform a Factory Default Reset on the Express to see if that will clear the lockup so the Express can be re-configured.
    Resetting an AirPort Base Station or Time Capsule FAQ

  • My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    1. verify on another Mac first. and another port.
    2. very likely dead SATA card
    read about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

    What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

    If they are both using the same iCloud ID (assuming you are running your mail from iCloud), then yes, the email will disappear from your Mac after you delete it from your phone and after your phone sycs with iCloud and your Mac syncs with iCloud.
    I use a windows phone, but it works the same.

Maybe you are looking for

  • Firefox crashing every few minutes, no apparent pattern... help!

    My five most recent crash reports are: bp-cb319015-3c97-4b42-aefc-bf9e521302212/21/20135:57 AM 437b2d4a-0e40-4e2c-bfd1-fb76be3f2361-flash22/20/20136:12 AM 437b2d4a-0e40-4e2c-bfd1-fb76be3f2361-flash12/20/20136:12 AM 437b2d4a-0e40-4e2c-bfd1-fb76be3f236

  • JNDI Context Retrieval in EJB 3.0

    I have a doubt about JNDI context retrieval in EJB 3.0. I know that when I call a bean from another bean I can use this line: InitialContext ctx=new InitialContext(); But I'd like to know whether in a Client I am obliged to pass this parameter: Initi

  • Left click on a link does not open the link; a small blue window opens saying loading then closes.

    Left click on any link in a web page does not open the link. A very small blue window appears with the word loading and a few moving dots. In a few seconds the blue window closes but the link does not open. Links used to open. If I right click the li

  • Company code consolidation

    I have a question regarding Company consolidation. I have five company codes each using the same Chart of account.  Now I want to do the consolidation of company codes.  How do I go about it ?  Please advise the best method. Can I use the group chart

  • Cannot Add new line using BI IP query

    Hi All, We have created a planning application (BI IP Query) and used it in VC 7.1 model using BI Query Wizard service. Now we are able to customize existing rows ( existing rows are using flat file upload)... we can able to change the existing recor