HT201205 no sound after using blue tooth with iphone 5

I have just purchased a 2014 Durango and the Blue Tooth works fine with my Iphone 5.  However, after i leave the vehicle, i have no sound on my phone.  Have tried to restart, turned the blue tooth off, tried playing both a song and a movie to no avail.  Any suggestions?

It sounds like it is still connected.
Try disconnecting it here:
Settings > Bluetooth > Select the Durango and disconnect.
If that does not work:
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

Similar Messages

  • Call volume low after using blue tooth

    I have an issue that I have not seen a response for.  After nearly 2 years of perfect use, my call volume (that is the sound of a caller's voice) is now too low.  The volume button on the side of the phone is at its peak (when I am on a call).  No water or other debris has gotten into the phone speaker that I can see.  The only think that did happen before this problem is - I had been on a blue tooth call in my car.  I have used this phone with blue tooth for over a year without any problems, but I mention this as it is the only think that I can think of that might have caused this glitch.  It is though the call volume is purposely very low and I thought that the blue tooth use may have caused this.  Any thoughts?

    It sounds like it is still connected.
    Try disconnecting it here:
    Settings > Bluetooth > Select the Durango and disconnect.
    If that does not work:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Can i use my blue tooth from iphone 4 with my windows computer

    can i use my iphone 4 blue tooth with my windows laptop

    In theory yes, but the Apple (Boot Camp) bluetooth drivers aren't working vary well it seems.
    Try a search in the forums and see what you can find.

  • Why can't I charge Iphone 4S while using blue tooth

    When I go to charge my Iphone 4S in car while using blue tooth the sound stops.  What can i do to correct this?  Or is that jus the way it is.

    Requires the support of Bluetooth Profile A2DP, that's why. Your phone supports such, but it appears your hearing aids do not.

  • Pairing apple blue tooth with 2 phones.

    Pairing apple blue tooth with 2 phones? Can it be done? I have an older plantronics that works no prob. but i prefer my new apple one.

    No. By Default, the BT will be active on the Pearl instead of the iPhone. you have to deactivate the Pearl in order to use with iPhone. I own the Cingular 8125 and if I activate BT with the 8125, it will deactivate the iPhone. I don't know why, but that's what it does. Best thing is to own two bluetooth earpieces. Like, say, the Jawbone and the Apple BT. Costly, but you'll have the two best earpieces ever made and can use each on all devices.

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • Help connecting an LG phone using Blue Tooth to Macbook

    Hello
    I am having trouble connect ing my LG phone to my Macbook using Blue Tooth. I am using discover mode on booth devices, i get asked about the code number machine on each device, but on the macbook it says that there is a problem with my Audio Device and that I need to disconnect the headset,,I dont have one connected. Any help with this would be greatly appreciated. thnx

    cheryllb wrote:
    I can get them paired but when I select the lg device listed on my HTC phone it does nothing.  I want to connect them so I can transfer the pictures from my old device to my new device.
    Hi Cheryllb,
    Thanks B33, as you are correct that this cannot be done via Bluetooth transfer. There are, however, ways that Cheryllb can get this done. Cheryllb, do you have a memory card in your LG Voyager? If so, you can save the pictures to the memory card (just go through your pictures, highlight them, press Menu, then move to card or "external memory" is how it may be displayed). Then, you can remove the card from the Voyager and either use it in your new device, or transfer the pictures using a card reader and put them on your PC. 
    To transfer Picture Messages from wireless device to PC: 
    1.        Access photo from "My Pictures" and choose "Options."
    2.        Select  "Move" or  "Transfer."
    3.        Remove memory card and insert card and card reader in USB port.
    4.        Go to your file directory on the PC.
    5.        Transfer files to the folder of your choice.
    If you do not have a memory card, you are able to connect your Voyager to a USB Cable and transfer the pictures from the device to the PC. Once that is done, they will be in a file. You can then hook up your new phone to the PC with it's USB cable and put the pictures on the new phone, by dragging and dropping that folder into the folder for your new device.
    I hope this information is helpful and allows you to find a resolution to transfer your pictures from phone to phone. I do understand how important these pictures can be.
    Thanks very much and have a great day! 

  • Connect OfficeJet 100 mobile printer to iPad using blue tooth

    Trying to print from my iPad to the Office Jet 100 printer using blue tooth and not getting it set up correctly.
    Help
    Dryrot

    Hi,
    Unfortunately the printer is not e-Print enabled which means you cannot use the e-Print or AirPrint functionality which both work over wi-fi and not bluetooth.
    The IPad does not have any options for bluetooth printing. I've included a link here to printers that are web connected and support wireless printing.  
    There's a thread here that covers this issue also.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How can i use the nymgo with iphone 4s?

    hi.....
    Does any body know, how to use the nymgo with iphone 4s with using wifi/data. i heard some applications charge them on bill as international call or so.
    any one uses it?????
    thanks

    DearCustomer,
    Thankyou for using Nymgo.
    Kindlydownload the latest version of nimbuzz from the app store for freeand create your free nimbuzz account.
    Launchthe app and go to settings.
    Undercalling tab choose voip provider and then select sip instead ofnimbuzz out.
    ChooseNymgo from the list, enter your nymgo account log in information andthen save.
    Makesure to check SIP instead of nimbuzz out after saving your account.
    Whendone you should be able to dial through the nimbuzz dial pad withyour nymgo account.
    BestRegards,
    NymgoSupport Team

  • How do I use apple remote with iPhone 5 ?

    How do I use apple remote with iPhone 5 ?

    Iphones dont have ir at all which the remote use for comm
    Only option is to use a dock which have ir

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • Can you use nike+  sensor with iPhone 5

    can you use nike+ sensor with iPhone 5. like the device you place in your shoe. Can it be connected to your phone.

    However, you don't need the sensor if you use the Nike+ Running app. It uses the phone's built in accelerometer.

  • Can i use time capsule with iphone

    can i use time capsule with iphone and ipad and how can i access my data at anywhre using time capsule

    TC is not designed for ipad or iphone or any iOS device.
    You should use them with cloud if you want remote access to your data do it via cloud.. you cannot easily get remote access to the TC from iOS device.

  • Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

    Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
    My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
    i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
    Thanks for any and all feedback-
    stratman1

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • Using blue tooth key board with Apple TV, possible?.

    I thought I read somewhere that if you were connected via earth net cable you could use a keyboard with ATV, Any thoughts. I also want to say that Thanks Apple for the update as it appears to me to work very well Thank You.CC

    Thanks Allycat very to the point response. I am more than satisfied with APT now with the firmware upgrade as I haven't experienced any glitches yet, now I gone and done it, jinxed it for sure, CC

Maybe you are looking for