HT201210 After updatation or restoration my phone has stopped booting it says iPhone and in the slide bar - slide here to configure

Hi all,
I bought this Iphone 3gs 8 gb from the market last year here in UK and the device was working fine until y'day when it asked for update and install latest version.
I did and the result it got hanged.
Now it is displaying on main screen: Iphone and in slidebar: configure
After that I ask for conutry, Wi-fi details and then goes to activate, then it says
" your iphone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a few minutes.
If this problem persists, contact Apple support at www.apple.com/support"
I did it several times all possible way but no result.
My phone was unlocked for any sim card.
Please suggest me what should I do.
Regards
Rps4iphone

You don't need to be at home to Reset...
Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...

Similar Messages

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

HT1212 I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying " iPhone is disabled connect to iTunes" What can be done?

I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying " iPhone is disabled connect to iTunes" What can be done?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT4211 There is an extra dot on the lock screen of my iphone and on the top bar of the phone screen 5 (ex: "10.20."). What should I do?

There is an extra dot on the lock screen of my iphone and on the top bar of the phone screen 5 (ex: "10.20."). What should I do?

If you swipe down from that bar, it will pull up your notification center.

Adobe flash player update service 11.3 r300 has stopped working, what causes it and how do I fix it?

I get this message once and a while: "adobe flash player update service 11.3 r300 has stopped working" I have reenstalled the flash player but it came back. any ideas?

This may help.
https://bugbase.adobe.com/index.cfm?event=bug&id=3225162
Good luck,
Keith

HT4628 After 7 months of flawless performance, my airport extreme has stopped working for my iphone and ipad. Can anyone help, i am not very computer savey.

After 7 months of flawless performance, my allpe airport extreme wi-fi stopped working for my iphone and ipad. I am not very computer savey. Can someome help me?
Thank you,
George N

Do you mean that only your iPhone and iPad stopped working! while other devices (Pc, laptop, etc..) still works?

My phone has stopped identifying Modem firmware, SIM and IME number

My iphone has stopped identifying modem firmware and IME number and has stopped identifying my SIM. It keeps on saying searching even if the SIM is inserted. Since I live in Nepal the authorized reseller said that it should be exchanged in the place where there is an apple store . And my 1 year warranty has also not finished. So what should i do now there is no apple store in my country.

Warranty is valid only in country of original purchase. You will have to either
take the iPhone personally or send it to a friend/relative/co-worker in that
country for them to take it to Apple.
Loss of modem firmware and IMEI are generally the result of 2 things:
1] hardware failure which is covered by warranty in country of original purchase; or
2] failed attempt to hack or modify the iPhone to use other than original wireless
provider - this is not covered by warranty nor will you be able to get a reduced
price Out of Warranty replacement on the iPhone if this is the case.
Return the iPhone to the country of original purchase for evaluation (EU is considered
one country for this purpose).

TS3694 It says error 3194 everytime I try to update or restore my phone. I have tried pretty much everything on the list. It also says that i have an update for itunes but when i try to update itunes, it sends me to update my iphone and wont let me bc err

K, well it says that there is a 3194 error everytime i try to update my iphone on itunes or restore it. I have tried pretty much all the things on the list from here and it is still not working. When I try to update my itunes it says i have a update but then after it tells me to update my phone to iOS 5.1.1 and then here comes the 3194 error again. Please somebody help

to doublecheck you tried everything error 3194 http://support.apple.com/kb/TS3694#error3194

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570

I've been using Photoshop Elements 2 on my Vista PC for years and it has stopped booting?

I've been using Photoshop Elements 2 on my Vista PC for years and it has stopped booting?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Elements forum, where you'll get more specialized help.
Best,
Julia

My Mac's iCal has stopped syncing with my iPhone, Macbook and iPad?

My Mac has stopped syncing with my iPhone and MacBook Pro. System preferences setting for iCloud has iCal selected in all devices. Interestingly, my iPad is showing all chat messages between me and other people when I am using my iPhone. This started about the time that iCal started misbehaving. May or may not be related.

Disabling digital camera notification
"No Camera Found" error every time I plug in iPhone
no camera found when syncing itunes

TS1538 hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....pleas

hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help

https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

After accepting today's update,11/17, my phone has locked up on a plug in to iTunes. Phone responds to nothing. Not even the restart. Help????

After accepting today's update,11/17, my phone has locked up on a plug in to iTunes. Phone responds to nothing. Not even the restart. Help????

Check the troubleshooting in http://support.apple.com/kb/TS1538 if you are using a PC or TS1591 if a Mac.

My iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore

Hey p0507!
Here is an article that addresses your error message, and can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks for using the Apple Support Communities!
Cheers,
Braden

After updating my ipad 4 to ios 7, i cannot charge my ipad with the charger supplied with it,showing messages of errors of the accessories. what can I do to resolve it? my ipad now has only 2% of charge.

After updating my ipad 4 to ios 7, I cannot charge my ipad with the charger supplied with it,showing messages of errors. what can I do to resolve it? my ipad now has only 2% of charge.Tried with lots of chargers with the same tresult.Somebody told me that it's due to the software upgradation, I have to wait for the next upgrade. need help. my ipad is dying!!!

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipadhttp://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6uhttp://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

HT201210 After updatation or restoration my phone has stopped booting it says iPhone and in the slide bar - slide here to configure

Similar Messages

Maybe you are looking for