HT201210 during restoring my iphone is not restoring at the step of restoring frimfare
While restoring my iphone it stops during frimware restoring and I tried many times its not going over that step
Any error number given during the restore process?
Has the firmware been modified before the latest update?
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
Similar Messages
-
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
trying to unblock my iphone 4s, because i moved to another country and need to use another carrier. followed all the steps to restore but at the end i received an error no. 9 and can not finish the restoring. i asked my older carrier for the unblock permission, it should not be a problem. can someone help me?
Read here:
http://support.apple.com/kb/TS3694#error9 -
my iphone dose not start it was stuck in restoring mode then it shut down and it won't start what shall i do
If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/ -
how can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4
The term "factory unlocked" has no meaning. Your phone was not legitimately unlocked. Contact the carrier it is locked to and find out if you can get it unlocked.
-
i plugged in my iphone to restore it but while restoring itunes shutdown itself . if my iphone is not connected to the mac itune works but when i connect my iphone to my mac itunes does not open at all.
Hi Arjun sache,
Welcome to Apple Support Communities.
It sounds like you're seeing an issue with iTunes shutting down unexpectedly when your iPhone is connected to the Mac. Take a look at the article below, it provides a lot of great troubleshooting tips that may be able to resolve the issue for you.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
I hope this helps.
-Jason -
Help iPhone 4S not a known mistake-1 at restoration
Help iPhone 4S not a known mistake-1 at restoration если можно на русском языке
Ошибка -1
Попытайтесь восстановить устройство iOS еще два раза. Если проблема не исчезнет, устройство может нуждаться в обслуживании. -
Did a restore, and now my iPhone will not activate, though the iOS activation server seems to be "green"
SIM card is inserted, connected to wifi, and connected to iTunes though it tells me it is "unable to continue at this time"
Any other solutions?Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
Even if I am willing to erase all data on my iPhone 4s, iTunes asks me to enter the passcode. How illogical can iTunes get? If I could enter the passcode, why would I need to erase the data? I have spent a fortune on purchasing the iPhone and I want my iPhone back.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
HT201269 my new iphone 5c does not give me the option to restore from icloud backup
I am trying to transfer the data from my old phone to my new one and my new 5c does not give me the option to restore from icloud backup
So now what do I doSettings>General>Reset>Erase all Content and Settings.
Once this is done, it will ask you to set your phone up again. You can choose to restore from your iCloud backup. -
itunes showing 'backup is corrupt or not compatible with the firmware you restored'.Please help.
Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance. -
I don't know what more details to offer. The browser crashed, all my open tabs were lost, and when I restarted Firefox, it did not give me the option of restoring the tabs. I really want them back. Is there any way to roll back and recover them?
That gripes me to no end, as well. You might think Mozilla could think this one through, at least to the point of realizing there should be a manual means to recover open tabs NOT restored automatically after a routine FireFox crash.
And if Mozilla cannot stabilize FireFox, it will keep losing users back to IE.
The epidemic of crashes seemed to begin when FireFox "improved" itself with the idea of running 3rd party plugins in a "container", which is still far from reliable. I must run SysInternals Process Explorer at least once per Windows session to keep FireFox from destroying itself.
Aside from FireFox being so unstable, Mozilla should show some concern for users and make the manual restore option very plain from the UI-- such as "RESTORE OPEN TABS LOST SINCE THE LAST (*&&!!! FIREFOX CRASH"
Presumably-- and that may presume too much-- Mozilla leaves the open tabs "log" in place during each update. If that record of open tabs remains untouched from update to update, then why does FireFox screw up, update after update, and routinely fail to recover all tabs?
You might think someone at Mozilla would realize something is wrong. I have let Mozilla "phone home" after each crash, and yet the problem continues. -
After going thru 3 hours of waiting to restore my iphone 4s thru itunes, still the phone is disabled. What else is needed to be done?
Did you try to connect in recovery mode to restore?
Follow this article: iOS: Unable to update or restore -
Hi i did the steps for restor my locked ipad (whech not sync befor) but after a while it says connot restore pecause it's locked? what i can do please help?
You have to force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
My phone died randomly and prompted me to plug it in and open itunes. When I did that it took me through the steps to restore my iphone. Now all of my contacts are gone as well as any text messages since May 19th (since my last sync), and most of my apps. How do I get it back to the way it was before?
Restore it from a back up. But I understand your last one is may 19 th...
-
I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??
http://tinyurl.com/nyj36v
Maybe you are looking for
-
View data in 10.1.3.4.1 is not working
Hi I imported SH Schema from the oracle database to the repository.But i can not view the data in admintool in 10.1.3.4.1 the steps are the following 1.import sh schema from the database to the admin tool 2.click on any table in physical layer and cl
-
HT201250 How can you tell if your backup is completed?
How do you tell if your backup is completed?
-
Convert .mp4 to .flv with centre screen play arrow
This has to be simple to do, but I can't find instruction to do it. My .mp4 file is 480x270 pixel, and the clip is about 12 seconds long. If any one could help me out. thx
-
I have a big database (1,6TB) and now many rows in many tables where deleted. The tablespaces are still very big but i want to shrink them to free up some disk space. So i want to try to export the whole database and import them with TABLE_EXISTS_ACT
-
Good Morning Experts: I have added several options(SAP and Custom) to the Right-Click event. It works as designed when Right-Clicking on the Matrix. However, when Right-Clicking anywhere else on the screen, the options are still displayed. How can