HT201210 erro 1602

como resolve-lo?

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694#error1602

Similar Messages

  • HT201210 Erroe 9 how to fix it.

    ipod touch stocked on restore mode, comes back with error unknown (9) any ideas how to fix it, please help.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • HT201210 WHAT AM I GOING TO DO IF STILL THE ERROR OCCURS 1602..IVE DONE ALL THE RESOLUTION BUT IT ALWAYS HAVE AN ERROR?

    ..ERROR 1602 OCCURS... WHAT AM I GOING TO DO? IS THERE ANOTHER OPTION OR SOLUTION ASIDE FROM APPLE SUPPORT PROCEDURES...

    Has you iPad been jailbroken?
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for  details on troubleshooting security software.
    ~~~~~~~~~~~~~~~
    Also do a Google search using iPad error 1602 & you'll get many other suggestions.
     Cheers, Tom

  • HT201210 hi, l tried restoring my iphone 4s n have got erro code 4013,could u explain that pls

    hi l m trying to restore my iphone 4s and is coming up as erro 4013,what shd l do?

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • HT201210 i get this messages when restoring my ipad an unknown error occurred (1602)

    i get this messages when restoring my ipad an unknown error occurred (1602)

    ok---I stopped the sync process of photos and now everything else syncs but still cannot eject my ipod.  Will try other tips on this website.  Thank you

  • HT201210 Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Does anyone recom

    Hi. During the process of updating my ipad to IOS 6 utilizing iTunes, I received the error #1602. I tried the update procedure again, this time itunes does not recognize the devise. The pad is displaying USB connecter to iTunes. Can anyone recomend a fix?
    Thank you

    There is only one fix now. The message on the screen means that you have to restore the iOS software on the iPad now. Read the part at the very end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple
    About the error code.....
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    If needed.....
    Additional Information
    If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.

  • HT201210 Hola, no enciende mi iphone 5, tampoco me deja restaurar en itunes, salta error (1602) como lo soluciono?

    Hola, no enciende mi iphone 5, tampoco me deja restaurar en itunes, salta error (1602) como lo soluciono?

    Hola
    Hasta hoy tenia ese mismo problema, y hoy borre el manual de ipad que se descarga a ebooks, puse gestionar la musica manualmente, y desactive la casilla de convertir acc y ya termino el preceso, la verdad no se cual fue lo que funciono, pero ya no se queda ahi
    saludos

  • HT201210 i can not restore my ipone in itunes erro (3014)

    i can not restore my ipone in itunes

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on):Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • HT201210 my phones stuck in restore mode and i keep getting erroe code 0xe8000001

    what do i do iv tried every thing its says only happened cause a up date

    There has to be a way to disable it. Go into Control Panel and you should be able to check. The problem with Windows 8 is that it is not officially supported by Apple/iTunes yet. While individuals are successful with doing many tasks with it, you can run into problems, as you have already seen.

  • HT201210 que  hacer cuando al restaurar mi ipad tengo un erro como

    al restaurar mi ipad 3,4 me aparese el error de que no es posible conectar al host de actualizacion de software de ipad que debo hacer en este caso

    Pruebe a desactivar cualquier software antivirus o cortafuegos que tengas en tu ordenador mientras haces la descarga.
    Leer esto: http://support.apple.com/kb/TS3125?viewlocale=es_ES

  • HT201210 hello i`ll have a iphone 4 whit the erro 2008 what is that??? and what to do???

    i have an iphone 4s and have a fail 2008 what is that an what to do whit it?????

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Erro de conversão taxa de câmbio  em BRL

    Olá Grupo, bom dia.
    Estou em projeto de migração 4.7 para 6.0, prem estou com erro na pricing do calculo do custo do frete (VI01), onde tenho uma condição que está apresentando a seguinte mensagem:
    Condição ZTOG (erro de conversão taxa de câmbio  em BRL)
    Nº mensagem V1208
    Diagnóstico
    Na conversão da moeda ocorreu um erro.
    As seguintes causas são possíveis:
    não existe nenhuma conversão de moeda válida
    a operação aritmética está errada
    Procedimento
    Verificar no customizing na etapa 'Definir fatores de conversão para a conversão da moeda' se existe uma taxa de câmbio válida de ZTOG para  e complementá-la eventualmente.
    Caso o usuário não possa efetuar esta atividade devido à autorização, deve informar a administração do sistema.
    Esse erro impede que o calculo do item seja realizado completamente e isso está interferindo na transferencia para contabilidade do valor do custo do frete.
    Alguem já passou por esse erro antes?
    Agradeço pela atenção de todos.
    Att.
    Alécio Silva

    Moçatto.
    Consegui identificar o erro.
    Na condição ZTOG a mesma estava definida como regra de calculo G - Formula, modifiquei para B - Montante Fixo pois já tem uma formula atribuida a pricing na condição que executa o calculo dos valores.
    Efetuamos os teste dos processo e funcionaou corretamente.
    Como está sendo migrado da versão 4.7 para 6.0 as configurações foram copiadas, mas após aplicação do pacote SAPKH60506 começou a apresentar o erro que informei.
    Quero agradeçer pela resposta sobre minha duvida.
    Obrigado.
    Abs.
    Alécio

  • Erro de SYSFAIL e Queda do Ambiente JAVA (PI)

    Bom Dia
    Estou num projeto de NFe e atualmente esta acontecendo o seguinte cenário de Erros:
        Na SMQ2 , quando apresenta um aumento nas filas de Mensagens , aparece SYSFAIL em determinadas Filas , todas as outras travam , aumenta o numero de Filas.
       Com essa mensagem de SYSFAIL nas filas , o serve0 (Parte JAVA do PI) cai e após isso estou tendo que efetuar manualmente um STOP/START em todos os canais de comunnicação para que os R/3 voltem a emitir NFe.
        Isso esta ocorrendo com mais frequência após inserir uma nova empresa para emissão de NFe.
        Alguem poderia me ajudar a entender por que ocorre o SYSFAIL as mensagens travam e derruba o ambiente JAVA ?
    Sérgio.

    1º) Erro: Commit Fault: com.sap.aii.af.rfc.afcommunication.RfcAFWException:SenderA
    2º) Foi alterado o numero de Filas O numero de Filas foi alterado , mas não consigo ver esse parametros na RZ10 , tem  3 entradas : X32_DVEBMGS32_NFISAP ; DEFAULT ; START_DVEBMGS32_NFISAP nessa transação ...onde eu vejo isso
    3º) Esse parametro não tem nessa transação (/usr/sap//DVEBMGS00/j2ee/cluster/server0/log/). em qual desses diretórios abaixo eu encontro esse parametro ?
    Existe esses:
    DIR_ATRA      /usr/sap/X32/DVEBMGS32/data
    DIR_BINARY      /usr/sap/X32/DVEBMGS32/exe
    DIR_CCMS      /usr/sap/ccms
    DIR_CT_LOGGIN    /usr/sap/X32/SYS/global
    DIR_CT_RUN              /usr/sap/X32/SYS/exe/run
    DIR_DATA              /usr/sap/X32/DVEBMGS32/data
    DIR_DBMS              /usr/sap/X32/SYS/SAPDB
    DIR_EXECUTABLE /usr/sap/X32/DVEBMGS32/exe
    DIR_EXE_ROOT     /usr/sap/X32/SYS/exe
    DIR_GEN              /usr/sap/X32/SYS/gen/dbg
    DIR_GEN_ROOT    /usr/sap/X32/SYS/gen
    DIR_GLOBAL        /usr/sap/X32/SYS/global
    DIR_GRAPH_EXE  /usr/sap/X32/DVEBMGS32/exe
    DIR_GRAPH_LIB   /usr/sap/X32/DVEBMGS32/exe
    DIR_HOME             /usr/sap/X32/DVEBMGS32/work
    DIR_INSTALL        /usr/sap/X32/SYS
    DIR_INSTANCE     /usr/sap/X32/DVEBMGS32
    DIR_LIBRARY      /usr/sap/X32/DVEBMGS32/exe
    DIR_LOGGING     /usr/sap/X32/DVEBMGS32/log
    DIR_MEMORY_INSPECTOR   /usr/sap/X32/DVEBMGS32/data
    DIR_ORAHOME       /oracle/X32/102_64
    DIR_PAGING                            /usr/sap/X32/DVEBMGS32/data
    DIR_PUT                            /usr/sap/X32/put
    DIR_PERF                            /usr/sap/tmp
    DIR_PROFILE      /usr/sap/X32/SYS/profile
    DIR_PROTOKOLLS     /usr/sap/X32/DVEBMGS32/log
    DIR_REORG                          /usr/sap/X32/DVEBMGS32/data
    DIR_ROLL                          /usr/sap/X32/DVEBMGS32/data
    DIR_RSYN                            /usr/sap/X32/DVEBMGS32/exe
    DIR_SAPHOSTAGENT     /usr/sap/hostctrl
    DIR_SAPUSERS     ./
    DIR_SETUPS                           /usr/sap/X32/SYS/profile
    DIR_SORTTMP     /usr/sap/X32/DVEBMGS32/data
    DIR_SOURCE     /usr/sap/X32/SYS/src
    DIR_TEMP                           /tmp
    DIR_TRANS                           /usr/sap/trans
    DIR_TRFILES                          /usr/sap/trans
    DIR_TRSUB                          /usr/sap/trans

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • Meu firefox não abre mais nenhum site, sempre que tento ir para algum site ele não carrega e nem exibe menssagem de erro, já desisntalei e resetei, o que fazer?

    depois q eu resetei ele , desisntalei limpei os registros e apaguei todas as minha configurações, tentei alterar o DNS para o DNS do google, apagar senhas e favoritos, eu tentei uma instalação limpa, porém o problema persiste, ele agora abre duas Abas uma era pra ser akele menu com os sites mais acessados, porém está abrindo uma aba em branco, e a outra aba é a página inicial padrão do firefox que contem o google como ferramente de pesquisa. não importe qual url ou endereço eu digite, ou qualquer palavra que eu solicite a busca, o firefox não vai para página alguma, ele permanesce com uma pagina em branco e a pagina inicial e não exibe nenhum erro ou sinal de carregamento ou atualização de página, gostaria muito de voltar a usar o firefox, pois não gosto do IE, porém ele está funcionando.
    PS.: o google chrome exibe o seguinte erro:
    Erro 137 (net::ERR_NAME_RESOLUTION_FAILED): Erro desconhecido.
    Talvez ajude a achar a solução para o problema.

    Olá Nalves,
    Por favor experimente rodar o seguinte antivirus e removedor de malware:
    * [http://pt.malwarebytes.org/ Malwarebytes]
    * [http://support.kaspersky.com/viruses/solutions?qid=208280684 Ferramenta TDSS]
    Certifique-se de selecionar para Remover arquivos maliciosos. Por favor nos informe o resultado do antivirus, e se isso resolve o seu problema.
    Obrigado,
    - Ralph

Maybe you are looking for

  • Batch determination issue.

    08.11.2010 Hi friends. We determine batches automatically at the delivery stage.  When a delivery is created against multiple sales orders and if the orders have the same items then in the delivery multiple lines are created for the same material. Th

  • Updation of condition type in conditions tab while creation of sales order

    Hi folks I have added one field called  price key in Sales B screen of VA01 in item level. When user will input price key here and then put enter. Then the Price should be updated in Conditions tab i.e the condition type will be updated in conditions

  • How to process attachments using an XI-Adapter

    Hi together, I have seen that there are a lot of problems processing attachments of XML messages in SAP XI 7.0. Unfortunately I have the same problem by using an XI sender adapter. My scenario is as follows: I will get an PurchaseOrderRequest_Out out

  • Using HashMaps in an EJB

    Ok this is the second time Im posting this problem. Last time I posted all the details and it may have been more general. This time I will be more specific. The following are the requirement that we were given for a school assignment, Develop a proto

  • Who has a 250 watt H330??

    Hi there! Does anyone have the 250w version of the H330?? If so, could they possibly do two things for me??? Firstly, possibly take a photo of the back of the unit so I can see the relaitive size and position of the PSU. Secondly, if at all possible,