HT201210 error 16, and cannot restore or update, plz help.

my update was stopped in the middle,
and next time i tried to restore and update, i cannot do any thing now,
the error code (16) apprear all the times,
my network, cable, windows, security, every thing is fine,
plz help.

Hello, talatafaq. 
Thank you for the question.  Here is the article that provides the troubleshooting steps for error 16.
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
Jason H.

Similar Messages

  • HT5654 I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    If iTunes is otherwise working properly start with TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, otherwise move on to Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have an (-1) error code and cannot restore my I Pad2

    I have an (-1) srroe code and cannot restore my I Pad 2, any solutions

    Usually a 1 or -1 error indicates a hardware problem.
    See 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • HT201210 I updated my ios to 5.1 and cannot restore my Ipad

    I UPDATED MY IPAD WITH IOS 5.1 AND CANNOT RESTORE IT. PLEASE HELP.

    Have you tried to force the iPad into Recovery Mode?
    http://support.apple.com/kb/ht4097

  • I tried to install ios7 last night and the screen is now on itunes with the usb symbols  Plugged the ipod into the laptop where itunes is stored.  Tried to restore only to be advised that a 3194 error has occured  cannot get any further please help!!

    Hi  I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo  I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error  cannot restore this ipod  please help thanks

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • TS1372 Cannot restore or update in iTunes with error 1437

    Cannot restore or update in iTunes with error 1437

    More info needed
    Which version of iTunes are you using?
    What is your iPod software version as shown on the iTunes Summary page?
    Error 143x, normally caused by harddisk write timeout, probably due to
    iPod Hardisk failing - Do the iPod Disk Diagnostic refer to this earlier tt2 post
    Slow USB port, low datarate, due to sharing with other USB devices - Disconnect all other USB devices while Restoring or syncing. Dont use any USB hub and also use the USB port at the back of the PC. and not the front.
    CPU Resource drained by other Apps like email, Antivirus, web broswer - Stop them, but if stopping Antivirus please disconnect the PC from the Inernet first.
    Have a nice day!

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked.

    I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked. I had been having trouble syncing music, When I tried to sync, iTunes said it didn't recognize my iPod, even though I was on the iPod page in iTunes which showed the model number and the serial number of my iPod

    I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
    When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
    Message was edited by: shenards
    Message was edited by: shenards

  • HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

    Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

    Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

  • Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Whilst updating itunes software to latest version I get runtime error R6034 and cannot get into itunes. Is there a fix for this problem?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99376)

  • TS3694 error 6 is coming up and cannot restore backup

    error 6 is coming up and cannot restore back need help please

    Generally a security software issue, read here:
    http://support.apple.com/kb/TS3125

  • I can't upgrade from IOS 6.0.1 to IOS 7.1.1. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation. Cannot restore or update in iTunes either. Help please?

    I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
    Any help would be much appreciated.
    Thanks!

    @Rudegar
    Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
    Thanks

  • Cannot restore or update iPod in iTunes 7 or later????

    Nano completely crashed today and said to restore with iTunes but i get this error "Error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439: Cannot restore or update iPod in iTunes 7 or later"
    All the resolutions from this link http://support.apple.com/kb/TS1372 do not work
    Anyone else have this issue?

    Am I just SOL?

  • I cannot restore or update my iphone

    i cannot restore or update my iphone - message comes up 'the iphone could not be restored unknown error 1669 occured' I had just updated itunes before this but my iphone was saying - searching - and i could not make or recieve calls.please help!

    http://support.apple.com/kb/ht1808
    Also see this discussion: https://discussions.apple.com/message/23301940#23301940

Maybe you are looking for

  • Browser can't find a text file opened via the save as dialogue box

    Hi there, I have a servlet which outputs a file using the servlet output stream, with the following lines set: response.setContentType("application/msword"); response.setHeader("Content-Disposition", "attachement; filename="+ fileName); servletOutStr

  • Problem importing RFC/IDOC

    Hi All, While importing RFC/IDOC, there are 3 steps 1. Logon 2. Choose Objects 3. Execute imports After giving the reqd info in logon, I can go to the next step, but here when I click on RFC or IDOC, I am not able to see the RFCs or IDOCS, IR is not

  • Hiding users in Corporate Directory

    I am trying to remember how to hide users in CD in CM. Referring to this tech note, hiding users is not that of a big deal, but this user gets removed from CD in Callmanager and hence the user doesnt show up in the phone. The disadvantage of this met

  • Is there a recent security update for OSX version 10.6.8?

    Is there a recent security update for OSX version 10.6.8?

  • Adjusting font weight?

    Hi, I'm not sure if this is the best forum for this question, but since I'm using Fireworks, I'll ask it here. Is there a way to adjust font weight when entering text that will be used to create a graphic (besides the bold command, that is)? I'd like