HT201210 Error 3194 when attempting update?

I currently have the software version "4.3.5" and I continue to try and update to the "5.1.1", but when I try it gives me the error message "3194" I have tried to resolve this with information from the apple forums and such but nothing works. I have tried un-installing and re-installing iTunes, and resetting ALL things on the iPod. Please I have been at this for HOURS.

Try:
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Restoring on another computer.

Similar Messages

HT201210 error 3194 when trying to update to ios6

i haqve an iphone 4s on 5.1.1,trying to update to ios6 error 3194????

Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
here are steps to fix it

HT201210 error 3194 when trying to update to ios 5.1.1

i can not update my iphone 4, when i try to update on i tunes it extracts the software but when it gets to verifying iphone i get the error code 3194,
i have tried to update also on the phone through the iphone and get a message saying not enough free space you need at least igb of free space.
i have also tried turning of norton security and firewall but no joy.

I have fixed this now by clicking on the fit it for me button, on this link http://support.microsoft.com/kb/972034 it fixes the host file for you, Happy Days

Error message when attempting update

While attempting to update iTunes, download was not allowed. Following message appeared: MSVCR80.dll

Very, very carefully throw your computer on the ground and burn your house down. No more error message.

HT201210 keep getting error 3194 when trying to update ,what is this

keep getting error 3194 when trying to update,what is this

error code 3194 http://support.apple.com/kb/TS3694 Do you have the lastest version of iTunes? if not update.

I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore, now my ipod is clear. I have tried disabling my antivirus, no luck.

I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
how am I supposed to do this ?
I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Above from:
http://support.apple.com/kb/TS3694
It may be more than you security software.
Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod?

HT201210 i keep getting error 3194 when restoring ??

I keep getting error 3194 when restoring ipad help ???

From 2nd link below.
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1.    Install the latest version of iTunes.
    2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    4.    Try to restore from another known-good computer and network.
    5.    If the errors persist on another computer, the device may need service.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Iphone 4S error 3194 when im trying to update to 6.1

iphone 4S error 3194 when im trying to update to 6.1 in itunes why cant i update it? It says in tunes that the update is available

IGadget Connect to iTunes;
Turn off your iGadget (holding the power / sleep on top of the device until it shut down);
Hold the power button / sleep and home simultaneously, after exactly 10 seconds holding both buttons (time), release only the power button / sleep, and
Hold down the home button until iTunes displays a message saying that a device was connected in recovery mode.
While your iGadget is in recovery mode the screen is completely black, which does not mean that the phone is switched off or stopped. Carefully follow the instructions in iTunes.

1.3 Update Error "An error occurred when attempting to change modules"

Good evening,
Recently updated to 1.3, and now, when starting, Lightroom won't open up a catalog. When I go t manually do this (File-Open), I get this error:
An error occurred when attempting to change modules
Sometimes, I can get the program to display, but it is blank (no photos) and when I select a different module, I get the same error code.
I have tried:
- Deleting preferences
- Opening a backup file
Neither one works.
Any ideas? We can do nothing at this point with Lightroom.
Many thanks,
Brett

Try removing user presets.

TS3694 iPod touch gets error -1303 when attempting to restore after update (W7)

iPod touch gets error -1303 when attempting to restore after update (W7). This error is not shown anywhere in the specific list. Have done all recommended recovery methods (reboot, update iTunes, restart iPod) to no avail. What is next?

Usually the 1303 error is in regards to a corrupted or missing backup of your iPod Touch. Try removing or moving the backups to another location and then try to restore your iPod once again.
See this article for information on where backups are stored.
iTunes: About iOS backups
B-rock

How to correct Runtime error R6034 when attempting to update iTunes on PC?

How to correct Runtime error R6034 when attempting to update iTunes on PC?

Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Getting Error 3194 when updating new ipad2 to iOS5

I am getting ERROR 3194 when I go to update my iPad2 I only got yesterday.

APPLES UPDATE SERVERS ARE DOWN!
This is why we all have this problem.
We all have to wait now...
Case closed.

Error 3194 occurs while updating my iphone to latest version, now i am unable to even use my iphone,any one guide me on this problem

I was using software 6.1 version when i want to update on latest version of iphone the error 3194 occurs on firmware stage at 75%, do anyone tell me why this error occurs or sugesion to resolve this problem?

Hi Tanveer_ahme,
If you received an error 3194 while attempting to update your iPhone, you may find the troubleshooting steps outlined in the following articles helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden

An error occurred when attempting to change modules Lightroom 5 CC

I've seen other users pose this question but haven't seen any solutions that work for me. I get the error: "An error occurred when attempting to change modules" when I open up Lightroom 5 on one user, but on another user it opens up fine. I've tried moving and trashing preferences, uninstalling and reinstalling the program. It's the same whether I open an existing catalog or try to open Lightroom while creating a new project. Any help would be greatly appreciated. This occured after updating to Mavericks on a 2011 iMac. All other Creative Cloud apps seem to have installed just fine.

Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do.

Purchased Light Room 5, installed, registered .. but keep getting this screen "An error occurred when attempting to change modules. ... OK" ?? WTF? ?

Installed Light Room 5.2 from Disc on my mac os x (latest, updated version)
But keep getting this "An error occurred when attempting to change modules.. OK" no other options/selection and of course if I click OK ... it crashed out ...
Can anyone help?
For such a big company .. there isn't any chat option to get to someone to talk to !!!

Just because you are the only user on the computer doesn't mean you are the administrator.
Also, the fact that you are being asked to re-enter your serial number each time you start means that it is not being remembered because something is either preventing it from being written to you disk or (less likely) something is erasing it. This does suggest that you lack certain permissions to make changes to your computer. Not only to save your serial number, but to have access to the Lightroom files needed to change modules (they are just plug-ins within Lightroom).
Try creating a new user account and run Lightroom from there (making sure that it is part of the Administrator group).
To get to chat support, you have to choose the options:

HT201210 Error 3194 when attempting update?

Similar Messages

Maybe you are looking for