HT201210 Error when updating iPhone from 5.1.1 to iOS 6.0

When I tried to update my iPhone software from 5.1.1 to iOS6, it said there was an error.  Then it said I needed to restore my iPhone.  I pushed update and restore, and it keeps giving me an error.  My iPhone is essentially wiped out and not usable because it shows iTunes with the cord logo on my phone.  I've tried this several times to restore.  What do I do?

http://support.apple.com/kb/TS3694#error3194

Similar Messages

  • Error when updating pages from template

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

  • Any way to turn off errors when updating pages from the template?

    I'm using Dreamweaver MX. My site is huge. It's an intranet
    spanning dozens of departments. Some of those departments have
    subsites that don't fall under the intranet's control, although
    they are embedded within our site's folder structure. When I make a
    change to the template and update pages, every time I hit one of
    those subsites I get tons of errors, from "template not found" to
    "unmatched body tag". The errors that pop up each have to be
    clicked on before the updating can continue. I get hundreds of
    these.
    Is there any way to make errors not pop up while updating
    pages from the template? Or even to exclude certain folders from
    being checked? (Cloaking doesn't do it.)

    > I'm using Dreamweaver MX. My site is huge.
    Both of these are problems, I'm afraid. Combining that with
    templates is
    really trouble.
    > "unmatched body tag".
    Errors such as this are definitely caused by errors in your
    page itself.
    Can you show me a page where you would get this?
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    Valid code will not produce these errors. Unfortunately, the
    only way to
    avoid them is to remove any validation hiccups from your
    pages.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "abna" <[email protected]> wrote in message
    news:f14ue2$pk5$[email protected]..
    > I'm using Dreamweaver MX. My site is huge. It's an
    intranet spanning
    > dozens of
    > departments. Some of those departments have subsites
    that don't fall under
    > the
    > intranet's control, although they are embedded within
    our site's folder
    > structure. When I make a change to the template and
    update pages, every
    > time I
    > hit one of those subsites I get tons of errors, from
    "template not found"
    > to
    > "unmatched body tag". The errors that pop up each have
    to be clicked on
    > before
    > the updating can continue. I get hundreds of these.
    >
    > Is there any way to make errors not pop up while
    updating pages from the
    > template? Or even to exclude certain folders from being
    checked? (Cloaking
    > doesn't do it.)
    >

  • Error when updating iPhone software.

    error: [There was a problem downloading the iPhone software for the iPhone "Eliz's iPhone". You do not have permission to access the requested resource.] I am trying to update iPhone to version 1.1.4 and I get the above error. I have reset the iPhone, restarted my computer, updated and repaired iTunes software (7.6.1.9)and nothing works. Has anybody else had this problem? Anybody know how to fix it?

    Well I checked and all my USBs are 5.0 or higher. However, i have 4+ USB ports on the back of my computer. I tried two different ones and the second one allowed me to pull in my photos (which i could not do before). However, It still will not let me update the iPhone software. Same error - you do not have permission to access the selected resource.

  • IOS 7 Error when updating iphone 4 with new itunes account

    Hi Guys, my phone is an Iphone 4, i tried creating a new itunes user account (as i was using my sons) then when i tried to peform an IOS7 update, it had an"upload Error" Message and i lost everything on my phone?

    Take a look at this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    From
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error6

  • -50 error when updating iphone???

    Hi everyone,
    I'm trying to update/back-up my iPhone 4 to the latest version. I've been sucessful in updating itunes, however, when I try to update my phone, the (-50 error message appears. It gives me the option to continue or cancel. It warns me that if I continue, it will delete all content. I'm concerned I will lose everything if I continue".
    If anyone has any step by step information on how to fix , it would be greatly appreciated!
    Thanks,
    jamiefromon

    If you have a backup stored in itunes you have nothing to worry about if not just right on you iphone under device and choose backup.
    As far as the error message goes if you search that message (-50) on http://support.apple.com/kb/TS3694 it refers you to errors 13 and 14 which states
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Hope that works for you

  • Adobe Bridge CS4 pops error when Update Option from Help is launched

    Hi All,
    when i m trying to Launch the Update from the help menu of Adobe Bridge it pops-up with a error messge instead of launching update.
    The error says
    Adobe Bridge
    Bridge is not in a position to check for updates.
    The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
    Ok
    Please help what is the probable cause for this.
    I have tried disabling the updateoption by
    1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
    2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
    I am using  Vista Build is the behavioural diff seen on XP n Vista
    Thank You

    Hey
    Apologies I dont think I had made myself clear.
    I am trying to package Adobe Photoshop CS4 which has Adobe Bridge as a component. As per the company standards, I am suppossed to be deploying this package & installing it using silent setup. Since this is a corporate environment, they do not want any auto updates to be enabled, as well as disable all menu items related to updates. Hence I had checked through the Adobe Support Site and followed the instructions provided by using the Adobe Deployment Toolkit and supressed the updates using the tool.
    Inspite of following the steps mentioned in the Deployment Kit and the guides associated with it, I was unable to supress the Updates options that reflects under Help Menu for Adobe Bridge CS4. All the other associated programs like photoshop, Extend Scripts etc the updates are disabled. The problem seems to be only with the Adobe Bridge Update.
    I have also tried disabling the update option by
    1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
    2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
    Inspite of trying the above steps the update option in the menu is still enabled and when I click on the updates menu item I get the following error message.
    Adobe Bridge
    Bridge is not in a position to check for updates.
    The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
    Ok
    Please advise,

  • Unknown error when updating iphone

    I just tried installing the 7.0.3 update for my iPhone 4 and it came back with an unknown error message. Does this mean I have lost all of my pictures that I hadn't downloaded yet? I just synced my phone before I updated. It has some irreplaceable pictures I took of my kids.
    Thanks.

    Here:
    The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Note: The "~" represents your Home folder. If you don't see Library in your home folder, Option-click the Go menu.
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press theReturn key.
    If you find the photos, then restore.
    Or, go to iTunes>iTunes Preferences (drop down menu)>Backup> and check to see if the backup is the most recent one. If there is no back up, then the photos might be gone if they are also not on your computer from any other methods.

  • Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

    Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

    It seems that the itunes program has some interfefence when contacting the apple server.
    i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
    Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
    ha presto it began the process of transfering the file to the iphone4 and has now fully updated
    hope that helps
    leon

  • I keep getting errors when updating from the Creative Cloud (49)

    I keep getting errors when updating from the Creative Cloud (49).
    " Update Failed" and when I click on Learn More. The error messages says there is a download error with (49)  I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

    Error 49 https://forums.adobe.com/thread/1491394
    -and https://forums.adobe.com/thread/1353632
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
    BTW Thank you,

  • Error 9 updating iphone 4 to ios4.3

    Hi guys.. Anyone experienced error 9 when updating iphone 4 to ios 4.3? Any solutions? My phone is now useless because of this.. stuck in DFU and cannot do restore/recovery..

    Did you check your security software settings? http://support.apple.com/kb/TS3125
    Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    copied from http://support.apple.com/kb/TS1275

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Error Loading Hierarchy Error when updating Idocs in Source System

    Hello  Friends,
         I am loading  hierarchy data  using Info pac into  0FUNDS_CTR . I have selected  a hierarchy under hierarchy selections tab  in the Info pac .
    All Partner profiles in WE20 seems OK .   But When I loaded data , throwing errrr message  as below
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    When I checked in TC WE05 says that  IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
    Please advice .
    Many thanks

    Hi  Krishna4bi,
    Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem  if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
    Hope it helps,
    By,
    Praveen Yagnamurthy,
    SAP BI Consultant,
    Blue Marlin Systems-INDIA.
    http://bluemarlinsys.com/bi.

  • Error when updating Idocs in Source System - Urgent

    Hi Team,
    When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
    When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
    <b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
    Can any one please help me to solve this error.
    This is am Urgent requirement for me to deliver.
    Thanks & Best Regards,
    Venkata.

    Hello VenkaTa,
    How r u ?
    The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
    Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

Maybe you are looking for