HT201210 First app store behaved weird than total crash! Ipad could not be restored. An unknown error occured (9)

I upgraded my new Ipad to OS to 6.0.1 today.
Right after update visual feedback on app store was simply not there.
You press install, it does not give you the "now installing" feedback. Yet you find out that the program is installed after couple of minutes!
Right after this I started to wish for 6.0.X or so...
Then I tried Nasa Spacecraft 3D app which was already installed.
The program run fine, then while the camera was active, Ipad decided to reset itself... over and over and over again...
I did the home and sleep button gimmick, no result... never booted up again but got stuck in reset over and over again mode.
I tried to connect to itunes and recover the pad but not use... The following image is the heartbreaking message from iTunes...
When you press "More Information" you simply get to reach this topic which is seemingly unrelated, yet I posted this here..
Will take it to the service first thing tomorrow, but Apple is about to lose a lot of hard earned credit on my side

Guys,
I am facing simlar issue. Could you pls let me know if are able to solve your iPad issue. I also download the iPad2_2_4.3.2_8H7_Restore.ipsw and tried to Restore using shift-->Restore and selecting the downloaded file. Following sequence take place:
Extracting software
Verifying iPad information
Preparing iPad for restore
Waiting for iPad
Preparing iPad software for restore
Restoring iPad software
The iPad 'iPad' could not be restored. An unknown error occured(2).
At the end, i'm still not able to Restore my iPad. Pls not that the "Update" option is always disabled and therefore i only get an option to Restore which is not working.
FYI, i am using PC with WinXP Professional with SP3. iTunes latest version 10 and iPad 2 with Wi-Fi and 3G model in India.
Plzzzzz help.
Thxs

Similar Messages

  • HT201210 what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT201210 The iPad could not be restored - An unknown error occures (-1)

    Attempting to upate to iOS6 - update failed - messsage received was to restore the iPad - this process went as far as "restoring iPad firmware where it stopped and resulted in the message - "The iPad could not be restored - An unknown error occures (-1)" Went through all the recommended trouble shooting steops but the problem repeats each time.

    Well, I did not think much about Hardware Error (1) becuase it had never happened to me.  Well, over the weekend, I decided to upgrade my iPad 2 32gb Wifi-CDMA to iOS 7.0.6.  I first attempted this OTA, not just once, but several times.  The device would download the software, began the process, reboot and began to apply the update.  It would reach about 60 percent and fail.  After the failure, the iPad would recover and reload the current 7.0.4 iOS.  It would then inform me I had an update.  Each time, I would try to apply the update OTA.  Each time, it would fail.  So, I tried to  complete the update via iTunes.  Well, each time, the process would get to 60 percent and fail.  iTunes would produce an error 3014 or error 1.  Looking through the logs, the problem would fail loading the firmware, and more specifcally, isolated to the modem.  I eventually tried so many times, I bricked my iPad.  I had it in recorvery mode and could not get out of it.  I read through all of the forums and the stories about driving to Apple stores, visiting the Genius Bars, calling Apple Support etc.  They all resulted in the samething, a hardware error of some kind.  Since I have taken hundreds of these iPads apart and repaired them, I figured that this one would get a new set of batteries and a logic board.  But before I decided I would do that, I tried to update and restore using several different cables, tried a desktop computer, two windows laptops, and a macbook pro and a macbook air, of course all with the same result.  So, knowing that iPads are built case down and that all of the connectors are either vertical or horizontal and that most of the horizontal connections are ribbons, I decided to try reseating all of the vertical connectors.  Know, before you read on, I would like to add a disclaimer to not try this at home or even try it at all, but I will tell you, it worked. 
    I took the iPad and dropped it on floor 5 times.  I left the iPad in it's case and droped it on a very tight nap throw rug on top of a hardwood floor.  I dropped it from an elevation of about 3 to 4 feet.  I was hoping that the shock would compress all of the vertical connectors and give everything else a bump too. 
    Nothing broke, especially not the display or digitizer.  Once I picked up the iPad, I connected it directly to a computer, went to iTunes and clicked on the upgrade and restore option.  The iPad loaded 7.0.6 without any issue.  The iPad is running great and I have not had a problem out of it at all.
    I do not recommend you do this to your iPad, but reseating all of the vertical connectors worked for me and I recovered an iPad that would have otherwise been bricked until it was disassembled and repaired.

  • HT201210 I am trying to restore software on my iPad which is connected to my PC with iTunes when i'm in recovery mode a warning comes up "The iPad could not be restored an unknown error occurred (1604) I have followed all suggestions  but still my iPad is

    I am trying to restore software on my iPad which is connected to my PC with iTunes when i'm in recovery mode a warning comes up
    "The iPad could not be restored an unknown error occurred (1604) This i have discovered probably a USB timing problem ?
    I have followed all suggestions  but still my iPad screen is locked with a iTunes logo and a USB cable beneath it, wish I had never bothered
    to update it now. Any help would be appreciated. rg

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • HT1414 I have done the first 3 steps but before I can get onto the 4th step a error message comes up Iphone could not be restored, an unknown error occured (1015), the iphone is a 3rd Generation Iphone 3G.

    I was using my Iphone 3G and I tunes told me I needed to upgrade my Itunes, after completing this the said I need to upgrade my I phone and it just blanked off while upgrading. I tried to restore it, I get throught the first 3 steps but then a message comes up and Iphone cannot be restored, unknown error has occured (1015) Please help me ??????????????

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    From Apple support page > http://support.apple.com/kb/TS3694#error3194
    We cannot help you with a jailbroken device. You will have to look elsewhere.

  • HT201210 iphone could not be restored an unknown error occurred (1644)

    iphone could not be restored an unknown error occurred (1644)

    I highly doubt you are using Snowbreeze.
    Error 2003
    Connection problem; change USB cable and check USB port.

  • HT201210 iphone could not be restored An unknown error occurred(2003)

    iphone could not be restored An unknown error occurred(2003)

    I highly doubt you are using Snowbreeze.
    Error 2003
    Connection problem; change USB cable and check USB port.

  • HT201210 the iphone could not be restored. an unknown error occurred (1015).

    the iphone could not be restored. an unknown error occurred (1015).

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015.

  • HT201210 the iphone could not be restored an unknown error occurred

    the iphone could not be restored an unknown error occurred

    What error message number are you getting with your unknown error?

  • HT201210 i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i keep getting this message when trying to update my old 3g-"the iphone could not be restored-an unknown error occurred (-1)-any ideas? anyone?

    i have done that
    same result
    the phone has a sim in it that is not active. does this cause the fault in question?

  • HT201210 the iphone "iphone" could not be restored. an unknown error occurred (3) what do i do?

    what do i do?

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Here's a link to the complete error code page:
    Resolve iOS update and restore errors - Apple Support

  • HT201210 the iPhone''iPhone''could not be restored.An unknown error occurred (1).

    the iphone iphone could not be restored an unknown error occurred (1)

    See these steps
    http://support.apple.com/kb/TS3694#1

  • HT201210 hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

    hi,am trying to restore my ipod but i am getting this message each time:the ipod could not be restored-an unknown error occured,what should i do?

    Was the complete wording of the error message? Usually an error number or other information is also provided

  • HT201210 the iphone could not be restored.An unknown error occurred 21

    the iphone could not be restored.An unknown error occurred 21
    Please help me

    Switch of your anti-virus and firewall then try again.

  • HT201210 im trying to restore my i phone 4s and on the final step it says 'the "iphone" could not be restored. an unknown error occurred (9). ' ANY HELP would be very welcome !

    can anyone help me with this restoring problem ?

    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

Maybe you are looking for

  • How to stop automatic numbering of paragraphs?

    I have an existing Pages document with numbered paragraphs.  When I try to modify the document by adding or deleting numbered (or unnumbered) paragraphs, Pages automatically inserts new sequential paragraph numbers that I cannot undo, delete, or chan

  • Applecare on iphone 5?

    Bought my applcare + for my iphone 5 upon release.  If I accidently drop or damage my phone will..... 1. Will they be apple to provide me with another iphone 5 or will I get a 5c becuase they are discontinued? 2. When I singed up the contract was $50

  • Where can get detail description of functions in tsapicvi.h?

    there are lot of API functions in tsapicvi.h,some of them I can get the description in teststand help file,for example, if I want to know TS_EngineGetUIMessage, I search the "GetUIMessage" in teststand help file,it will get the description.but some A

  • Problem with Arabic character in Servlet !!!! please help

    hi all , this is my servlet code ==================================== import java.io.*; import javax.servlet.*; import javax.servlet.http.*; public class P extends HttpServlet      public void doGet ( HttpServletRequest rq , HttpServletResponse rs)  

  • Creating Record Group dynamically.

    Hi, I have multi line block. My req is i have create record group dynamically based on some fields in line level. This my code in To Location - Key next item, DECLARE group_id          RecordGroup; v_lms_lov lov; BEGIN group_id := Create_Group_From_Q