HT201210 help........my iphone not starting after i restore  it

i have an iphone 3g
and when i put it to the pc itunes it said that i have to restore it
then an error ocure and the phone won't start again
help me please as quick as possible

Waelkaka wrote:
it's not solved yet
the code error is 1015
and i tried every  thing ...nothing changes.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Similar Messages

  • My iphone not start it want restore but im unable to do this plz teel me about this........

    my iphone not start it want restore but im unable to do this plz teel me about this........

    Tried it. When I'm trying to upload the video, though, I'm getting an error that reads "iPhoto cannot import your photos because there was a problem downloading an image." So what do I do?

  • Help, OracleDBConsoleasdb could not start after rebooting of server.

    We have Oracle AS 10g R2 with infrastructure and portal. What can I do?
    Mbw
    Elena

    Which of them?
    F.exp. Oracleim1ASControlsrvc.log contain:
    01/14/08 06:04:05 Recieved ServCtrlHdlr command, 5
    01/14/08 06:04:05 Stopping iasconsole
    01/14/08 06:04:05 Launching stop EMD process...
    01/14/08 06:04:06 Waiting for stop EMD process to exit. numRetries=74
    01/14/08 06:04:11 Waiting for stop EMD process to exit. numRetries=73
    01/14/08 06:04:16 Waiting for stop EMD process to exit. numRetries=72
    01/14/08 06:04:16 Stop process has exited with exitCode: 0
    01/14/08 06:04:16 Waiting for emwd process to exit. numRetries=74
    01/14/08 06:04:16 Watchdog process exited with exit code -1
    01/14/08 06:04:16 Signal Shutdown event.
    01/14/08 06:04:16 Shutdown thread exited.
    01/14/08 06:04:16 ServiceMain wake up by ShutdownProc, emwd has exited. ServiceMain exits
    -------------- [Oracleim1ASControl] ------------
    EMDROOT=D:\oracle\im
    ORACLE_HOME=D:\oracle\im
    EMDSTATE=D:\oracle\im
    CONSOLE_CFG=iasconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    01/14/08 06:04:56 Start pending...
    01/14/08 06:04:56 Verifying iasconsole is not started already. Command line "D:\oracle\im\bin\emctl.bat" istatus iasconsole
    01/14/08 06:05:00 iasconsole launch commandline is "D:\oracle\im\bin\emctl.bat" istart iasconsole
    01/14/08 06:05:00 Tracking process launch...
    01/14/08 06:05:33 Received exitCode 1 from emctl istatus
    01/14/08 06:05:43 Did not hear back from emctl istatus.
    01/14/08 06:05:43 Waiting a further 5 secs...
    01/14/08 06:05:48 Did not hear back from emctl istatus.
    01/14/08 06:05:48 Waiting a further 5 secs...
    01/14/08 06:05:53 Did not hear back from emctl istatus.
    01/14/08 06:05:53 Waiting a further 5 secs...
    01/14/08 06:05:58 Did not hear back from emctl istatus.
    01/14/08 06:05:58 Waiting a further 5 secs...
    01/14/08 06:06:04 Did not hear back from emctl istatus.
    01/14/08 06:06:04 Waiting a further 5 secs...
    01/14/08 06:06:09 Did not hear back from emctl istatus.
    01/14/08 06:06:09 Waiting a further 5 secs...
    01/14/08 06:06:14 Did not hear back from emctl istatus.
    01/14/08 06:06:14 Waiting a further 5 secs...
    01/14/08 06:06:19 Did not hear back from emctl istatus.
    01/14/08 06:06:19 Waiting a further 5 secs...
    01/14/08 06:06:24 Did not hear back from emctl istatus.
    01/14/08 06:06:24 Waiting a further 5 secs...
    01/14/08 06:06:29 Did not hear back from emctl istatus.
    01/14/08 06:06:29 Waiting a further 5 secs...
    01/14/08 06:06:34 Did not hear back from emctl istatus.
    01/14/08 06:06:34 Waiting a further 5 secs...
    01/14/08 06:06:39 Did not hear back from emctl istatus.
    01/14/08 06:06:39 Waiting a further 5 secs...
    01/14/08 06:06:44 Did not hear back from emctl istatus.
    01/14/08 06:06:44 Waiting a further 5 secs...
    01/14/08 06:06:49 Did not hear back from emctl istatus.
    01/14/08 06:06:49 Waiting a further 5 secs...
    01/14/08 06:06:54 Did not hear back from emctl istatus.
    01/14/08 06:06:54 Waiting a further 5 secs...
    01/14/08 06:07:00 Did not hear back from emctl istatus.
    01/14/08 06:07:00 Waiting a further 5 secs...
    01/14/08 06:07:05 Did not hear back from emctl istatus.
    01/14/08 06:07:05 Waiting a further 5 secs...
    01/14/08 06:07:10 Did not hear back from emctl istatus.
    01/14/08 06:07:10 Waiting a further 5 secs...
    01/14/08 06:07:15 Did not hear back from emctl istatus.
    01/14/08 06:07:15 Waiting a further 5 secs...
    01/14/08 06:07:20 Did not hear back from emctl istatus.
    01/14/08 06:07:20 Waiting a further 5 secs...
    01/14/08 06:07:25 Did not hear back from emctl istatus.
    01/14/08 06:07:25 Waiting a further 5 secs...
    01/14/08 06:07:30 Did not hear back from emctl istatus.
    01/14/08 06:07:30 Waiting a further 5 secs...
    01/14/08 06:07:32 Received exitCode 3 from emctl istatus
    01/14/08 06:07:32 iasconsole started

  • Iphone not starting after reset

    i have one iphone 3. i choose reset all settings option to remove the numbers, names and other stuff. it said, iphone will take one hour. after doing this, apple sign is continuously on my screen. even i press home and top buttom for minutes, it didnt switch off. its choosing to switch-off with a bling by its own but then immediately apple icon appears. i tried to reconnent it through itunes but nothing worked. even holding the home screen and attaching the cable. many other ways to rectify it but all waste... its not even charging. it shows red mark (battery out) often. trying to figurew out the restoration but nothing helping. could u guys plz help me with this. thanks.

    Sounds like the Activation Lock is still set to the previous owner. If you are unable to get that Apple ID and password that iPhone is totally useless to you.
    Take it back to the shop and demand your money back because they sold it to under false pretenses.
    Allan

  • My iphone not activating after I restored it

    I restored my iphone 4s and now is not activating how do I fix this problem?

    Hello aflo232413,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with activating your iPhone please follow the steps in the article linked to below.
    Get help activating your iPhone
    Take care,
    Alex H.

  • Jlauch.exe not starting after a restore from powerquest

    Hi
    I did an image of my server and I wanted to restore from it, when I did restore, the jlauch.exe does not load up to the max
    It goes up to 256k and it stops
    I am running windows 2003 with oracle 10g

    Hi,
    The problem with memory.
    Refer SAP Note 764215 - Problems with big java heap when started via jlaunch.exe
    Regards,
    Suraj

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Hi All, Need help my iphone 4 lock after upgrape ios7.1 (no service). i buy a secondhand phone not know first apple id. please advise how to normalize

    Hi All, Need help my iphone 4 lock after upgrape ios7.1 (no service). i buy a secondhand phone not know first apple id. please advise how to normalize

    You will need the original owner of the iPhone to unlock it for you, or the iPhone will remain useless.  It has been Activation Locked, which is described here:
    http://support.apple.com/kb/HT5818

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Windows 8.1 desktop PC not starting after hibernation

    Hi,
    I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
    and such but this new one is hard to figure out without a desciption.
    First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
    I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
    I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
    white text on blue background), I got to a black page with grayish text telling me the following:
    Windows Boot Manager
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows installation disc [...]
    2. Choose your language [...]
    3. Click "Repair your computer."
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
    It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
    Errors:
    1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
    2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
    I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
    I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
    Sorry if this post is a bit of messed up, that's about how I feel right now... :)
    Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
    Many thanks in advance.

    Hi,
    According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
    Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
    For Windows boot process knowledge, you can refer to the contents of the link below for more details:
    http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
    For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
    Roger Lu
    TechNet Community Support

  • RAC does not start after trying to move storage

    Hello,
    We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
    RAC does not start after we reformated the storage to RAID 10.
    What we did:
    1) deleted the database
    2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
    3) on both nodes
    - recreated VotingDisk
    node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    - tried to move OCR but was able only on one node:
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
    These return ok for both node1 and node2:
    node1:oracle$ cluvfy stage -post hwos -n node1
    node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "node1"
    Destination Node                      Reachable?
    node1                                 yes
    node2                                 yes
    Result: Node reachability check passed from node "node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name                             Comment
    node2                                 passed
    node1                                 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name                             Status
    node2                                 not running
    node1                                 not running
    Result: Daemon status check failed for "CSS daemon".
    Cluster manager integrity check failed.
    Checking cluster integrity...
    Cluster is divided into 2 partitions.
    Partition 1 consists of the following members:
    Node Name
    node1
    Partition 2 consists of the following members:
    Node Name
    node1
    node2
    Cluster integrity check failed. Cluster is divided into 2 partition(s).
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    WARNING:
    CSS is probably working with a non-clustered, local-only configuration on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    Data integrity check for OCR passed.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 no
    Result: Liveness check failed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "EVM daemon".
    Liveness of all the daemons
    Node Name     CRS daemon                CSS daemon                EVM daemon
    node2         no                        no                        no
    node1         yes                       no                        yes
    Checking CRS health...
    Check: Health of CRS
    Node Name                             CRS OK?
    node1                                 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    Please help.

    Thanks for the answer.
    Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
    You can see that cluster is not healty from cluvfy output.
    When I tried to start crs whith crsctl start crs but:
    - on node2 none of the demons starts (CSS, CRS or EVM)
    - on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
    Problem 2: Cannot change OCR location
    node2:root$ cat /var/opt/oracle/ocr.loc
    +#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
    ocrconfig_loc=/dev/rdsk/c7t30d0s3
    local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    node1:root$ cat /var/opt/oracle/ocr.loc
    ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
    local_only=TRUE
    node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    Problem 3: On node 1 I wrongly issued a command
    node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

  • My iPhone4 does not start after it was out of charge and recharged again?

    My iPhone 4 does not start after it was out of charge and recharged again?

    Hi Svedjot,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • 16 GB x-Fi Style - does not start after charging

    Hi,
    4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
    Can anyone help me?
    Cheers,
    Uli

    Re: 6 GB x-Fi Style - does not start after charging:Just fyi
    I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
    But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

Maybe you are looking for