HT201210 hi, i have a iphone 3 that i purchased. It appears it was jail broken. i don't know what that really means. I tried to restore it through itunes but it won't allow me to restore. What can i do?
hi
I have purchased a iphone 3g, it appears that it was jail broken. I don't know what that means. I tried to restore the phone to factory settings but it won't allow me.
What can i do?
No support or assistance can be provided here for jailbroken devices.
Similar Messages
-
hi
I have purchased a iphone 3g, it appears that it was jail broken. I don't know what that means. I tried to restore the phone to factory settings and i cant does anyone have a way to get around this and beat the error 1015 code.Sorry dean,
We do not provide support on this forum for jailbroken devices. You should do a Google search to see if you can get some help elsewhere.
Sorry,
GB -
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??
Try
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
I purchased a book on itunes but it won't allow me to download the book on my ipad. It allowed me to download the book on my computer, but I don't know how to transfer it from the computer to the ipad. Can anyone help me?
You should be able to re download the book on your iPad.
Try here > Downloading past purchases from the App Store, iBookstore, and iTunes Store
On your iPad tap Settings > iTunes & App Store
Swipe down and make sure Books is switched ON.
Purchased books should appear when tapping the iBooks icon now. -
I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
Hey!. I have a problem Adobe premiere didn´t appear on my crative cloud, I don´t know what to do!
Rajshree is correct, 64-bit apps don't appear in the Creative Cloud app on a 32-bit computer/OS. We have this document about this issue here too: http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
-
TS1398 I have a wifi connection but it won't allow me to join. what should i do?
I have a wifi connection but it won't allow me to join. it happens when i upgraded my iphone to 5.1.1. What should i do now? can anyone help me please. thanks
Turn your router completely off (unplug it) for a few seconds, then turn it back on again and see if you can connect.
-
I have an iPhone 4 and a 4th gen iPod linked to the same email address and apple ID. I am trying to change the email address on the iPod so a family member can use it but when I do it says it doesn't recognize the email address. Where am I going wrong ? I just want them to be able to iMessage and email without having to use my email address.
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
-
hi I cant activate my ipad, I have restored it through iTunes 5 times but keep getting a error that says cant connect to server. Laptop is connected to pocket wifi but I cant get passed that screen on my ipad. Im not real computer literate but would appreciate any help.
Thank youiTunes 5?
That may be the problem.
update iTunes
which iPad is this? 1st generation? -
My Iphone4S was in the middle of updating its latest software then suddenly it switched off, it hasnt turned on since and I've tried to reset it but only the apple sign appears then the plug into ittnes symbol. I've tried to plug it into itunes but it says my phone is on repair mode which is why it needs to be restored first in order to connect to itunes. I have also then tried to restore it but the error sign appears.
http://support.apple.com/kb/HT1808
-
Hi, I have purchased a new film from iTunes but I cannot download it as i don't have enough room. I have other films that I need to transfer to icloud before I can download the new one but don't know how to do this.
You should be able to re download the book on your iPad.
Try here > Downloading past purchases from the App Store, iBookstore, and iTunes Store
On your iPad tap Settings > iTunes & App Store
Swipe down and make sure Books is switched ON.
Purchased books should appear when tapping the iBooks icon now. -
I was given an ipod and it has been disabled and I have tried to hook it up to itunes and it won't sync
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
LR won't allow me to adjust the margins below minimum values of about 0.25 in. Borderless printing and 8.5x11 borderless media are selected.
LR also won't allow me to increase the cell size. It seems to have a maximum of 8x10.68.
Aspect ratio of the image I'm trying to print is 8.5x11 so it should be a perfect fit.
When I print the same image in Photoshop, it prints borderless just fine on the same printer.
Mac, Yosemite, Canon i9900.I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).
Maybe you are looking for
-
How can one read a Excel File and Upload into Table using Pl/SQL Code.
How can one read a Excel File and Upload into Table using Pl/SQL Code. 1. Excel File is on My PC. 2. And I want to write a Stored Procedure or Package to do that. 3. DataBase is on Other Server. Client-Server Environment. 4. I am Using Toad or PlSql
-
I have an iPod mini Gen 2 which will not mount with either a fire wire 400 or 800 but does mont with a USB cable. I will mount in my car and with my JVC TV. What is wrong, I have reset and restored it. Using the latest updates and iTunes 9.1.
-
Hi: I need to develop some applications that are developed using the component portal to portlet . Are there any tools that make? Is there any documentation that can help me? Best Regards. Maria Elena
-
Raw files Adobe Photoshop Elements & Nikon D7100
Raw files from my new camera Nikon D7100 is not supported with my current Adobe Photoshop Elements 9. I have uploaded Adobe DNG converter for now but would like to know if I purchase Adobe Photoshop Elements 12, would it support the raw files from my
-
Hi Bought a book "Introduction to Relaational Databases and SQL Programming " last week on Amazon. It has 3 cd's with 9i. On the cd I am asked to go to this site http://otn.oracle.com/software/registration/?9ibooks. There is nothing & I can't get a r