HT201210 How do i fix code error 2003 on a iPhone 4?

How do i fix code error 2003 on a iPhone 4 & how does the bluetooth work?

Are you using the usb cable that came with the phone? 
Try using a differnt usb port.
both the phone and bluetooth device have to be in paring mode.   See the bluetooth manual to pair your iphone.

Similar Messages

  • HT201210 how can you fix -1 error code

    how can you fix and -1 error code

    May be a hardware failure.  See http://support.apple.com/kb/TS3694#error1.

  • How do I fix Safari error code 3014?

    How do I fix Safari error code 3014?

    Debug console is mainly for use by the website developer to debug their own sites - so unless you are trying to debug your own site then I'd leave it switched off.
    All versions of iOS 5 have been available for the first gen iPad, it's iOS 6 that you can't update to on it. If you want to update to iOS 5.1.1 (the highest version that it supports) then you should be able to do so via your computer's iTunes : https://discussions.apple.com/message/22061024#22061024

  • How to fix connection error on facebook via iphone 4s

    How to fix connection error on facebook via iphone 4s?

    I had the same problem for days. I reset the phone bu holding down the home button and the on off switch together. Don't swipe to turn off. Just hold down the two buttons until phone switched off then wait a few seconds and switch it back on. I can't also use Facebook on safari which I was also having problems with. Hope it helps

  • How do I fix -50 error message when syncing phoneon Windows 7?

    How do I fix -50 error message when syncing phone on Windows 7?

    Quit Mail. Back up all data.
    Triple-click the line of text below to select it, then copy to the Clipboard:
    /Library/Mail/Bundles
    In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
    A folder may open. If it does, move the following item in that folder to the Trash:
    UnsubMailPluginMailAppOSX.mailbundle
    You may be prompted for your password when you do this.
    Launch Mail.

  • How do I fix this error message??

    How do I fix this error message
    "This message could not be delivered and will remain in your Outbox until it can be delivered.
    The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
    ThANK YOU!!!
    Rich

    Mail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
    Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings.

  • HOW I CAN FIX THE ERROR 69

    HOW I CAN FIX THE ERROR 69

    Hello victoro5961,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes displays a -69 error when syncing iPod
    http://support.apple.com/kb/ht1210
    Best of luck,
    Mario

  • HT201401 how can i fix an error 1601 restore

    how can i fix 1601 error on iphone 4

    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • How do you fix itune error 7(windows error 1114)

    how do you fix itune error 7 (windows error 1114)

    Hey snowmanlahaie,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • Error in Migration Db sql server to sql Azure, how i can fix this errors

    I get an error TOTAL_WRITE is not supported in current version when i try validate my database from sql server migration in to sql azure. How I can Fix this error migrate to sql azure
    Also I git this error sp_spaceused is not supported in current version of Azure SQL Database – Reynel Useche Velasco 22 mins ago
    StoredProcedure [dbo].[p_sizetables] -- 'db_name(' is supported only for the local database. You should test to verify the results are what you want. – Reynel Useche Velasco just now edit
    Reynel Alfredo Useche Velasco

    Hi Reynel,
    I see that you have posted this query on stack overflow.
    I would like to involve our SQL experts in this topic and get the best solution.
    As of now to my knowledge @@TOTAL_WRITE is not supported on SQL Azure.
    In the meantime, you can refer the below links for migrating your database from on-prem to Azure.
    https://msdn.microsoft.com/en-us/library/hh313125(v=sql.110).aspx
    https://msdn.microsoft.com/en-us/library/hh313129(v=sql.110).aspx
    Hope this helps you.
    Girish Prajwal

  • How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?

    How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.

    You probably don't need the hard drive and optical drive specs, but here they are?
    ======================
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          1.5 Gigabit
      Description:          AHCI Version 1.20 Supported
    HL-DT-ST DVD-RW GH41N:
      Model:          HL-DT-ST DVD-RW GH41N                  
      Revision:          PQ06   
      Serial Number:          K3D9BH92251        
      Native Command Queuing:          No
      Detachable Drive:          No
      Power Off:          No
      Async Notification:          Yes
      Bay Name:          Upper
    HL-DT-ST DVD-RW GH41N:
      Model:          HL-DT-ST DVD-RW GH41N                  
      Revision:          PQ06   
      Serial Number:          K3D9BH92251        
      Native Command Queuing:          No
      Detachable Drive:          No
      Power Off:          No
      Async Notification:          Yes
      Bay Name:          Upper
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    Hitachi HDP725050GLA360:
      Capacity:          500.11 GB (500,107,862,016 bytes)
      Model:          Hitachi HDP725050GLA360                
      Revision:          GM4OA5CA
      Serial Number:                GEA534RJ06E63A
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk1
      Rotational Rate:          7200
      Medium Type:          Rotational
      Bay Name:          Bay 1
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk1s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk1s1
      Content:          EFI
    OSXLION:
      Capacity:          499.25 GB (499,248,103,424 bytes)
      Available:          192.76 GB (192,758,513,664 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk1s2
      Mount Point:          /
      Content:          Apple_HFS
    Recovery HD:
      Capacity:          650 MB (650,002,432 bytes)
      BSD Name:          disk1s3
      Content:          Apple_Boot
    Hitachi HDP725050GLA360:
      Capacity:          500.11 GB (500,107,862,016 bytes)
      Model:          Hitachi HDP725050GLA360                
      Revision:          GM4OA5CA
      Serial Number:                GEA534RJ06E63A
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk1
      Rotational Rate:          7200
      Medium Type:          Rotational
      Bay Name:          Bay 1
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk1s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk1s1
      Content:          EFI
    OSXLION:
      Capacity:          499.25 GB (499,248,103,424 bytes)
      Available:          192.76 GB (192,758,513,664 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk1s2
      Mount Point:          /
      Content:          Apple_HFS
    Recovery HD:
      Capacity:          650 MB (650,002,432 bytes)
      BSD Name:          disk1s3
      Content:          Apple_Boot
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    WDC WD2002FYPS-02W3B0:
      Capacity:          2 TB (2,000,398,934,016 bytes)
      Model:          WDC WD2002FYPS-02W3B0                  
      Revision:          04.01G01
      Serial Number:               WD-WCAVY7048785
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk3
      Rotational Rate:          5400
      Medium Type:          Rotational
      Bay Name:          Bay 2
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk3s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk3s1
      Content:          EFI
    BU2TB-Time:
      Capacity:          2 TB (2,000,054,960,128 bytes)
      Available:          1.1 TB (1,096,926,654,464 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk3s2
      Mount Point:          /Volumes/BU2TB-Time
      Content:          Apple_HFS
    WDC WD2002FYPS-02W3B0:
      Capacity:          2 TB (2,000,398,934,016 bytes)
      Model:          WDC WD2002FYPS-02W3B0                  
      Revision:          04.01G01
      Serial Number:               WD-WCAVY7048785
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk3
      Rotational Rate:          5400
      Medium Type:          Rotational
      Bay Name:          Bay 2
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk3s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk3s1
      Content:          EFI
    BU2TB-Time:
      Capacity:          2 TB (2,000,054,960,128 bytes)
      Available:          1.1 TB (1,096,926,654,464 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk3s2
      Mount Point:          /Volumes/BU2TB-Time
      Content:          Apple_HFS
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    WDC WD10EAVS-00D7B1:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          WDC WD10EAVS-00D7B1                    
      Revision:          01.01A01
      Serial Number:               WD-WCAU43604330
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Bay 3
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk0s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk0s1
      Content:          EFI
    Data:
      Capacity:          999.86 GB (999,860,912,128 bytes)
      Available:          715.55 GB (715,549,786,112 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /Volumes/Data
      Content:          Apple_HFS
    WDC WD10EAVS-00D7B1:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          WDC WD10EAVS-00D7B1                    
      Revision:          01.01A01
      Serial Number:               WD-WCAU43604330
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Bay 3
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk0s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk0s1
      Content:          EFI
    Data:
      Capacity:          999.86 GB (999,860,912,128 bytes)
      Available:          715.55 GB (715,549,786,112 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /Volumes/Data
      Content:          Apple_HFS
    Intel ICH10 AHCI:
      Vendor:          Intel
      Product:          ICH10 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          3 Gigabit
      Description:          AHCI Version 1.20 Supported
    WDC WD1003FBYX-01Y7B0:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          WDC WD1003FBYX-01Y7B0                  
      Revision:          01.01V01
      Serial Number:               WD-WCAW31850957
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk2
      Rotational Rate:          7200
      Medium Type:          Rotational
      Bay Name:          Bay 4
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk2s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk2s1
      Content:          EFI
    BUOSXLION:
      Capacity:          999.86 GB (999,860,912,128 bytes)
      Available:          697.88 GB (697,881,690,112 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk2s2
      Mount Point:          /Volumes/BUOSXLION
      Content:          Apple_HFS
    WDC WD1003FBYX-01Y7B0:
      Capacity:          1 TB (1,000,204,886,016 bytes)
      Model:          WDC WD1003FBYX-01Y7B0                  
      Revision:          01.01V01
      Serial Number:               WD-WCAW31850957
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk2
      Rotational Rate:          7200
      Medium Type:          Rotational
      Bay Name:          Bay 4
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk2s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk2s1
      Content:          EFI
    BUOSXLION:
      Capacity:          999.86 GB (999,860,912,128 bytes)
      Available:          697.88 GB (697,881,690,112 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk2s2
      Mount Point:          /Volumes/BUOSXLION
      Content:          Apple_HFS

  • How do I fix adobe error (103:103)

    how do I fix adobe error (103:103)

    Hi Tonni16,
    Are you getting the error with any PDF that you open in IE, or just a certain type of PDF?  You can you please try the following and let me know if you're seeing the error?
    1. Launch Reader;
    2. Choose Edit > Preferences > Security (Enhanced) > uncheck "Enable Protected Mode at startup";
    3. Click on "OK" button;
    4. Exit Reader;
    5. Launch IE and open the PDF file.
    If the above steps do not resolve the issue, please uninstall Adobe Reader using Adobe's Cleaner Tool. The tool is available at the following link:-
    http://labs.adobe.com/downloads/acrobatcleaner.html
    then please re-install Adobe Reader using the full installer from the link mentioned below:
    http://get.adobe.com/reader/enterprise/
    In case, you still experience the same issue, then please provide the following information:
    1. What is the Operating Systems installed?
    2. What is the version of Adobe Reader installed on your system?
    3. Is Adobe Acrobat installed on your system as well?
    4. Which browser is used to view the PDFs?

  • TS1602 how do I fix an error 8058 on a mac???

    How do I fix an error 8058 on a mac???

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • How do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

    how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

    Hello Kwastfamily,
    It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • TS1368 how can i fix this error:"please contact itunes support to complete this transaction"

    how can i fix this error:"please contact itunes support to complete this transaction"

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.
    For iTunes: Apple Support for iTunes - Contact Us

Maybe you are looking for

  • Sequence number in a Order

    Hi, Can any body explain me regarding Sequence number in an assignement tab page of a Production Order. Under what circumstannces it is used and How? Regards, Prasad

  • Imac (running 10.8) won't recognize wifi printer

    My imac (running 10.8) won't recognize one (1) of my two (2) epson artisan 810 printers when I try to add it to my wifi in the "print and scan" utility.  The printer that won't connect was previously connected to a PC running Win7.  Could Bonjour hav

  • Bridge CC issues

    Everything worked fine until this morning. This morning I was notified of a Bridge CC update and I proceeded to install it. Now when I go to use it I get this message "Bridge encountered a problem and is unable to read the cache. Please try purging t

  • NTFS file for for Mac OS X 10.7.1

    Where can I get/Download the latest NTFS file format for may Mac running OS X Lion 10.7.1 so that I can access my external hard drive(s)....?!?

  • What happens if I delete CalDAV in iCal? I'm getting a persistent error message

    What happens if I delete CalDAV in iCal? I'm getting a persistent error message that says something like the server doesn't recognize my account or username, or some such thing. Background: This all started after I (a) decided to try a free trial of