HT201210 how to restore apple software

i have a apple 3Gphone how to restore software and new verson 5.1 please help me i am waiting your information i have down my phone with out soft ware

Go through the error specific troubleshooting.
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.  Very rarely this error is caused by a hardware issue and requires service.

Similar Messages

  • HT1600 how to restore apple tv

    apple tv lights flashes quickly and there is no image how to restore it

    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • I lost my ipod software. pleas tell how to install apple software

    i lost my ipod software. pleas tell how to install apple software

    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If that is not want you wanted, please provide more information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT201210 How to restore an iPod touch 4 with password

    i dont know how to restoe my ipod touch and itunes wont do an update.How can i fix it?

    For how to restore:
    iTunes: Restoring iOS software
    Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I

  • How to Use Apple Software Update w/ ARD 2.2

    There must be a way - but I haven't figured it out yet - to use ARD 2.2 to control Apple Software Update on client computers. Is it simply to take control of each computer one at a time and run Software Update? If so, that doesn't simplify things much over actually going to each computer in my lab. I'm hoping there's a more automated, streamlined way to do it. Please let me know the secret - if there is one!
    Thanks!

    Send the UNIX command "softwareupdate" (Send Command As root). Here's the usage:
    softwareupdate <mode> [<args> ...]
    -l | --list List all appropriate updates
    -d | --download Download Only
    -i | --install Install
    <label> ... specific updates
    -a | --all all appropriate updates
    -r | --recommended only recommended updates
    -u | --url <url> ... from signed package URLs
    Per-user preferences:
    --ignore <label> ... Ignore specific updates
    --reset-ignored Clear all ignored updates
    --schedule (on | off) Set automatic checking
    -h | --help Print this help
    PowerMac G5 DP 2GHz   Mac OS X (10.4.7)  

  • How to restore Apple TV if an update was interrupted?

    How do I restore my Apple TV if an update was interrupted?

    By connecting to iTunes
    http://support.apple.com/kb/ht4367

  • How to restore iphone software

    were and how do i get this iphone restored back to factory 2-gen  3.0 
    when i do it all i get is a message that saids......... unknown error (23) can not restore

    See http://support.apple.com/kb/TS3694#error23 for error 23 troubleshooting.

  • HT201210 how to restore

    trying to restore my iphone but it keeps saying error

    Go through the error specific troubleshooting.
    http://support.apple.com/kb/TS3694#error1015
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.  Very rarely this error is caused by a hardware issue and requires service.

  • How to restore a software raid mirror after a drive failure

    i set up a software raid mirror with two hard drives in a mac pro. then one failed as reported by disk utility. i replaced the drive. it does not seem possible to restore this raid short of copying the files to a third location and then erasing and establishing a new raid. is there a way to simply "restore"?

    Question: Do I need special software to administer the Mac Pro RAID Card or the Xserve RAID Card?
    Answer: Normal administration can be carried out using the RAID Utility (found in /Application/Utilities) or by using the raidutil command. For more information refer to the User’s Guide or man raidutil.
    The command-line utility should be available in Single-User mode.
    To run RAID Utility, you may need to boot to an alternate source of Mac OS to be able to manipulate the Boot drive.
    This article suggests using the Make Spare command:
    RAID Utility 1.0 Help > If a Disk Fails
    Message was edited by: Grant Bennet-Alder

  • How to restore apple as my Safari start page?

    DivX Player instaled a Bing - agent in my iMac/OSX 10.7.5, now my start page for Safari is not Apple, but "Bing". I do not want it, I'd like to restore the Apple page.
    Any ideas?

    DivX Player instaled a Bing - agent
    Please post the link from which you downloaded it.

  • HT201210 how to restore frormatted iphone 3.5

    we had iphone 3.5 formatted
    how could we restore OS ? Failed twice

    Don't understand your question and you need to be more specific.  iPhone 3.5 does not even exist so what version of the iPhone do you have and what iOS specifically are you using?

  • HT201210 how to restore iphone4 to factory settings

    how do i restore iphone4 factory settings

    Read the User's Guide, it covers basic functionality such as restoring.

  • How to restore previous software on iPad

    I have upgraded to the new software and am not happy about the new sounds.
    Is it possible to downgrade and get the previous version back?

    Sorry, downgrading isn't supported.

  • HT201210 how to restore iphone 4

    I was trying to update my Iphone 4 to IOS 6.0.1. But after downloading it did not update. Instead asking me to restore the iphone. The iphone screen is showing an image of plug in to itumes.
    Help.

    Unplug your phone, shut it down by pressing and holding power until slide to power off shows up. Once it's off just press and hold the home button then while pressing plug it back into itunes. Keep holding until an itunes symbol shows up when it does look to itunes to see if the message itunes has detected an iphone in recovery mode. If it does let go of home button and proceed to the restore process.

  • HT201210 how to restore iphone when error has occurred

    help!! i am to restore my iphone to syncing to itunes but an error has occurred it is in recovery at the mo but i am stuck i need itunes on it!! help please lol xxx

    What was the error

Maybe you are looking for

  • How can I view only UNSAVED images/metadata?

    I rotate photos in bridge, but these metadata changes are not saved to the actual image until saved in Photoshop. If I missed saving a few photos during my initial steps, how will I know which photos still need to be saved if i can only see the modif

  • Flow Layout

    Hey, i got a little problem. I need to write a clozeTest in JavaFx and it´s not function like i want. The problem that i have, is that the text shouldn´t start on a new line in case he hasn´t enough place. * clozeStage.fx * Created on 03.06.2010, 13:

  • Archive/Move files based on Modified Date range to another Library Using PowerShell while retaining Metadata

    Hi, I am trying to archive files from a SharePoint 2010 document library by moving them to another library that's a dedicated archive/folder/library. The files to be moved are selected based on their modified date column value that should range betwe

  • Netgear MR814v2 help

    I have a Mac mini and a G4 iBook, both with the latest OS. I have a Netgear MR814v2 wireless router. I cannot get the thing to work.The browser set-up starts up, and detects that I have a dynamic DCHP, which is correct. However, that is as far as it

  • CRM/AET Help

    Hi, I need to add few zfields to the Sales Quotation, Service Quotation, Service Order  in SAP CRM , I am new to CRM and i found that AET tool in CRM can be used to enhance these tcodes. I need the below information , can some one help me with this 1