HT201210 i am unable to sinc my 2010 mercedes with my new iphone, any ideas

any bluetooth help would be appreciated

I just switched my 2011 Mercedes from pairing with my old iPhone 4 to a new 5S and it was a bit confusing (much easier on my wife's Ford Fusion and more capabilities there). Mercedes has downloadable instructions specific to your year/model and specific to your phone. Start with the following link and follow it through selecting your year/model and then click on the picture of your phone (not the check box below the phone) and then download the "pairing instructions"  http://www.mercedes-benz-mobile.com

Similar Messages

  • Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

    Have a look at this it might help
    http://support.apple.com/kb/TS4148

  • I am unable to Check out when buying an iPhoto Book. Any ideas?

    I am unable to Check Out when buying an iPhoto Book. Any ideas?

    In Australia? There Print Store there is down and has been for a few days. Apple say check back tomorrow. Or the next day. Or the day after...

  • Since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    Yes... remove your finger from the camera lense.

  • I loaded my phone on my old mac book and have since replaced that book with a new a new one. I have new music that wont sync up with my phone. Anyone have any ideas how to get my new music onto the phone?

    i loaded my phone on my old mac book and have since replaced that book with a new a new one. I have new music that wont sync up with my phone. Anyone have any ideas?

    If this is a question about syncing with iTunes, you might want to post it over in the iTunes forum.

  • HT201371 More Apple id's with the same Touch ID possible? I have two Apple ID's, one for buying apps since the first iPhone and later, one for iCloud. Now with my new iPhone 5s, after installation Touch ID is connected to the iCloud one.

    I have 2 Apple ID"s, one for buying app's (since the first iPhone) in the store and another one for operating with iCloud things. Now, after installation/activation of my new iPhone 5s, the Touch ID is connected to the iCloud world. Conclusion, if I like to buy a new app. I still have to fill in the password for the other Apple ID. In the past I asked Apple to may join both, but that seems to be impossible.
    Anyone a solution?

    I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

  • I am unable to upload my itunes playlist to my new Iphone 5

    I am unable to upload music from my itunes on my windows computer to my new Iphone 5.

    Try power-cycling your router (unplug for 15 seconds, then plug back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, and try joining your network again.  Note: resetting network settings will erase passwords for previously joined networks on your phone.

  • Unable to access BCM 2010 DB with Outlook 2010 after running compatibility pack for Outlook 2013

    After reading about the Description of Business Contact Manager compatibility pack for Outlook at this link http://support.microsoft.com/kb/2793723 it clearly states "Business Contact Manager for Microsoft Outlook is a compatibility pack that enables
    Business Contact Manager for Outlook 2007 and Business Contact Manager for Outlook 2010 to run in Microsoft Outlook 2010 and Microsoft Outlook 2013. Business Contact Manager for Outlook (BCM) also supports using Outlook 2010 and Outlook 2013 in a side-by-side
    installation."  This link also states "General product fixes, including stability and performance improvements."
    So, I was hoping for some stability and performance improvements but desired to continue running from Outlook 2010.  After running this downloaded compatibility pack it had little messages other than completed. If I try to run it again it says the database
    is already updated.  however, now I cannot open the BCM DB in Outlook 2010.  when I try to connect to it from Outlook 2010 BCM it only opens a small window with no message, only a yellow exclamation sign.  It also won't allow me to restore the
    back up.
    Can I undo what the compatibility pack program did to my BCM 2010 DB?
    Now it won't allow me to restore a DB from two days ago. It gives this error "Access is denied due to a password failure. RESTORE FILELIST is terminating prematurely".  I know the password is correct.
    Please help, anyone? Now I'm starting to freak out a bit.  I am going to reinstall BCM and pray.
    I was able to restore the two day old DB by not entering a password. Odd since I know I backed up using a password.

    Hi,
    Just checking in to see if the information was helpful. Please let us know if you would like further assistance.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I am unable to find the burn option with the new iTunes.  It's not under files.

    I have added my audiobook to my list but when I right click on it there is no option to burn it.  What am I doing wrong ?

    Thanks
    Problem resolved itself. Turned out that I had ben unable to contact the App store to confirm purchase. Once this resolved itself program downloaded properly and installation went without a hitch.
    Thanks again

  • I am unable to sign in to imessage on my new iphone 5.  Says check network connection

    I just got a iphone 5 and I am unable to log on to my apple id.  It says check your connection.  I have wifi in my house.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • Would like to sync Sharepoint 2010 task with Outlook and iPhone

    Hi
    I have a Sharepoint 2010 server - function as intranet server, and as a project webserver. 
    When I create a new project in SP, I also get a Task list. Very good. And I can also connect the project to Outlook.  Very good that as well :)
    I do have an Exchange 2010 server as well.
    But... I also use a iPhone - where I have connected my mail, calender and task. This is working fine. 
    The problem is  the task from Sharepoint project. When I try to add new task list, I just find the list where I have added e-mail accunts. Not the one from SharePoint. 
    Anyboy following? :) 
    So, is it possible too Sync Sharepoint 2010 task list with your personal outlook tasklist? :)
    -N-

    Hi Narna,
    Thanks for posting your query, Kindly browse the below mentioned URLs to Sync SharePoint Tasklist with your Outlook task lists step by step
    http://www.sharepointgeoff.com/how-to-synchronize-a-sharepoint-2010-task-list-with-microsoft-outlook/
    http://pholpar.wordpress.com/2011/12/30/synchronizing-sharepoint-tasks-with-outlook-including-categories/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • I'm unable to sync my contacts with the new iPhone 5 and my 2012 Hyundai Santa Fe. Will there be a fix for this in the next update?

    I previously had an iPhone 4 synced and paired with my 2012 Hyundai Santa Fe and had no issues. Now I have a new iPhone 5 and am able to sync the phone but the contacts will not update in the phone book listing for the vehicle. I've tried several times to re-sync and pair the phone to the vehicle and still the same issue. I'm able to make an receive calls but no contact information is being displayed. From all of the previous community issues reported it's not an AT&T issue, Hyundai issue, it's clearly pointing at the device (iPhone 5) being the issue.
    Will there be a fix for this in the next update?
    Thank you.

    Thanks for your response. However, after speaking with a level 2 Apple Advisor and Hyundai there is an issue that both companies are aware of and are working towards a resolution. Here's a blurb from Hyundai that was sent to me after I spoke with Apple Advisor:
    "We apologize for any inconvenience associated with the technical issues with devices connected via Bluetooth. Hyundai is aware of the iPhone losing its Bluetooth connection to the vehicle along with any function associated with it at the time. Hyundai has been able to reproduce the concern in our test vehicles and have sent all necessary information to Apple engineers. Hyundai received confirmation from Apple that they will work on debugging.
    If your iPhone is 3G, 4, 4S, 5 and has one of the following iOS: 6.0, 6.1.0, 6.1.1, 6.1.2, 6.1.3, 6.1.4 or higher, you may be affected." - Hyundai Engineering

  • I'm trying to get music from an external lacie hard drive imported onto my iMac. I cannot open the Lacie drive since it says 'power pc not supported'. Any ideas here?

    I am trying to import mp3s from a lacie external hard drive onto my iMac. They were saved from a dell running windows. My iMac says "power pc not supported" when I connect the lacie drive. Any ideas here, I have about 25GB of music I'm trying to save. thanks

    Do not move the music yourself.
    http://docs.info.apple.com/article.html?artnum=301748

  • I have an old iphone 3 with all of my music on it. The laptop that had them stored in itunes has long since died. Ive got a new iphone 5 and Mac and would like to put the music onto the new iphone.

    I have an old iphone 3 that has all my music on it. The itunes library that had all the songs in it is on a laptop that died. Ive got a new iphone 5 and Mac and was wondering how i can transfer the music from the old phone to the new one??

    You can transfer the purchases you made on your old iPhone 3 by plugging it in to iTunes and doing File > Devices > Transfer Purchases from your IPhone to the iTunes on your computer.  This will get music you purchased in iTunes, apps, etc.  (e.g., movies).
    But for the rest you would need to restore a backup of your newly deceased computer.

  • I am unable to import Raw files taken with my new camera Canon SX60HS.

    I am running Elements 12, I have just downloaded and installed Adobe Camera Raw v 8.7.1 as it indicates that it supports raw files taken with this camera model.  I continue to get the error that nothing imported as it did not contain supported file types.  Do I have to do something further to connect this ACR program to Elements in order to have it work or am I missing something else.

    The SX-60 HS requires ACR 8.7, and PSE12 is only compatible up to ACR 8.5, so you’ll either need to upgrade Elements or use the DNG Converter 8.7 or newer to convert a folder of raw files to DNG files, and then those DNG files will open in your older ACR.
    You can get the DNG Converter from here:  http://www.adobe.com/downloads/updates/

Maybe you are looking for