HT201210 I did everything to deal with "error 21" and still doesn't work.

My iphone still with the image in front "connect to itunes". I dont know why, because I did everything about the resolution of "error 21". Please somebody help me to deal with it.

http://support.apple.com/kb/TS3694 since you have tried everything. The link states that it could be a hardware problem and may require service. So you will need to make an appointment with Apple and take your phone in and have the Genius Bar take a look at it.

Similar Messages

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

I had a bright house cable modem that also had built-in wi-fi.
Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
That would be correct. Hopefully, they offer this type of option for their customers.

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M.

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

HT5654 i've updated my itunes with the latest update. now it doesn't open at all and i can't access anything on itunes. I have tried every soltio posted and still doesn't work. How do i fix this????

itunes doesn't open or work after update. Tried everything still doesn't work. HOW CAN I FIX THIS??????

Hello, llynitta.
Here are the best resources for troubleshooting the issue you are experiencing.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Jason H.

TS1398 I did everything you are recommend to do and still cannot connect to the network. "Unable to join network" shows up even that is a university network working for other users - students and staff. I am very unhappy with my new iphone 5 :(

I did everything recommended on apple store support site and still cannot connect to the network with my new iphone 5 but my co-workers and students (I work for the university) can keep connectivity all the time. I am very unhappy with my new phone

Be patient, Apple is coming out with a update soon, its been reported that they have sent the update to the carriers to test, which means it will be soon. And is suppose to address this issue.

TS1538 Itunes will not recognize my ipad 1 anymore. Did everything it told me to check and still will not recognize it.

my itunes will not recognize my ipad anymore. Did everything it told me too. What can I do now.

Have you tried here > http://support.apple.com/kb/TS1538
If so...
Try a Restart of your Computer and this Reset for the iPad...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..

COIB error :015 and explode doesn't work

Hi All,
We are trying to maintian the parent - child relationship along with respective serial numbers as this data is currently coming from another legacy system. We had options of using IB51 (installed base) and COIB transaction. IB51 works but I want to understand how COIB works, I have tried the details provided in previous links posted by other folks on similar topic. But I am still getting 2 errors: First even though I had maintained a PM bom (or universal) bom, explode button doesn't work. Why??
Second issue, when I manually enter the components and transfer and try to save in background or foreground, I am getting following error message: COIB:015.
Please advice how to resolve above 2 errors, and finally is there another other place where SAP experts suggests to maintain parent-child relationship along with serialization.
Thanks.
Naren

I am closing this as we are using install base records instead.

How can I deal with error 200621 and 200279?

Hi, I am new to Labview. I was asked to use Labview to do some basic frequency-domain analysis for my homework. The hardware I use is myDAQ student instrumentation device. Basically, I am asked to transfer audio signal from MP3 to Labview by using the audio in jack on myDAQ, and transfer the editted signal to a speaker by using the audio out jack. Also, I was asked to have a toggle to let users alter from music to white noise.
Here's the problem. If I do not switch between white noise and music, it works well. But as long as I click the toggle, either error 200621 or error 200279 will appear. And I referred to the help file (http://digital.ni.com/public.nsf/allkb/AB7D4CA85967804586257380006F0E62), but I still have no idea how to solve the problem. Could anybody give me a detailed instruction, thanks.
vi file mentioned above is attached
Attachments:
HW1.vi ‏197 KB
Vm495+HW_1.pdf ‏153 KB

Take a look at:
Getting Started with NI-DAQmx: Getting Started with NI-DAQmx Programming in LabVIEW
Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
You can also find a lot of DAQmx examples with Find Examples under the Help menu.
Also, if you right click on a DAQ assistant and choose Open Front Panel, it turns it into a subVI where you can look under the hood and see how the DAQ assistant is doing its job with the basic DAQmx functions.
For queues, look for examples for that as well. And also look for the design templates under File / New... for Producer/Consumer architecture. Also do more searching on the forums for questions and answers about queues and producer/consumer.

Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

I want to do a border-radius with box shadow and it doesn't work, why?

This should be simple but it's not working and I don't know why. I think the problem is in the html.
I simply want to have a div with an image inside that is circular and has an inset shadow and is centered on the page.
/*here is my css*/
#div3 {
-webkit-margin:25px auto;
-webkit-border-radius:50%;
.box-shad{
-webkit-box-shadow: 15px 15px 15px #8 inset;

<body>
<div class="gridContainer clearfix">
<div id="div3" class="fluid"><div class="box-shad"><a href="index.html"><img src="images/Big-tree-trans1.png" width="900" height="700" alt=""/></a></div>
</div>
</body>
Here is my website: www.adjacentdimensionsmedia.com

I want a different drop shadowed image on each page. Is there a way to do that?
Sure. Copy & paste the following code into a new, blank document.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Document</title>
<style>
    margin: 0;
    padding: 0;
    -moz-box-sizing: border-box;
    -webkit-box-sizing: border-box;
    box-sizing: border-box;
img {
    max-width: 100%;
    vertical-align: baseline
body { background: #069 }
header, footer {
    clear: both;
    width: 100%;
    padding: 0 2%;
    background: #CCC;
    color: #000;
    min-height: 50px
article {
    clear: both;
    width: 75%;
    min-height: 600px;
    padding: 0 2%;
    background: #FFF;
    color: #069;
    margin: 0 auto;
.shadow img { box-shadow: 1px 3px 5px #333 }
.radius img {
    -moz-border-radius: 10px;
    -webkit-border-radius: 10px;
    border-radius: 10px;
.border img { border: 20px solid #069 }
.center {
    text-align: center;
    margin: 0 auto
</style>
</head>
<body>
<header>Header</header>
<article> <h1>Main content area</h1>
<div class="shadow radius border center">

<img src="http://placehold.it/500x325.jpg"> </div>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<p> </p>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</article>
<footer>Footer</footer>
</body>
</html>
Nancy O.

As i'm installing itunes, I have this problem come up I have tried installing reinstalling all components and still doesn't work this is the error message?

"could not write value quicktime task to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run verify that you have sufficient access to that key, or contact your support personnel.
if anyone can help that would be great thanks!

I have tried that but still doesn't work, I have right clicked the itunes setup right as administrator, still has the key problem, this time, it is the ituneshelper key same location, but ituneshelper key

I am a windows XP user and I recently upgraded to I tunes 10 and everything on my computer slowed down to a snail pace.. Any other problems out there like this??? I did everything that D528 said to do and it still runs like a snail

I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before???

I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before???

TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

TS3694 My iPad-2 went itself to restore mode and did't complete it with error 3194. Whan can I do?

My iPad-2 went itself to restore mode and did't complete it with error 3194. Whan can I do?

Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone

HT201210 I did everything to deal with "error 21" and still doesn't work.

Similar Messages

Maybe you are looking for