HT201210 I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?
helpppp
I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?
See if this helps: http://support.apple.com/kb/TS3694#USB
If it does not help, the drop probably damaged something inside the phone.
Similar Messages
-
Ipod touch won't turn on, just shows the apple logo - even when plugged into Itunes?
I have an Ipod touch 8GB - it's virtually never been used. I have tried to charge it up but nothing happens - it just displays an apple logo. I have plugged it into Itunes but again nothing happens. Any ideas?
Thanks K.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please help!
I'm sorry, you are correct I am trying to restore my ipad because it stopped working. We thought the battery was dead so we plugged it into the wall charger. All it does when plugged in is flash the apple logo like it is going to start up and then shut off. It repeats this every few seconds while it is plugged into the wall. I let it charge overnight and still nothing.
When I hold the power button and the home button down together while the ipad is plugged into the wall, it does flash then after I release the power button the connect to itunes screen comes on. But when I connect it to my computer it goes blank. itunes does not recongnize my ipad when I plug it into the computer. I have used the same cord to plug in my other devices and itunes recongnizes them so it isn't the usb cord.
It seems as if my system has crashed and I think this may just be an apple service trip for me. But thanks so much for the advice. =D -
how do you unlock your ipod..we have tried different passcodes and now is is saying to plug into itunes...guy at the apple store said to plug into itunes too...
we have done this and still nothing....thanks still wont unlock..Do as the manuals says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
My phone is stuck with the image of 'plug into itunes' on the face when I try to install ios7. after installing all but the ios7 the comp. says the phone is in 'restore mode error 6, and says to restore it first from the phone b4 I can use itunes but, again, my phone is stuck in the 'plug into itunes' image ????
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
Hello.
I recently woke up this morning to use my iPod Touch (2nd Gen) to find that it was completely unresponsive to both buttons and would not turn on. I had been using it the night before and had not charged it. Thinking the battery was drained, I plugged it into a wall outlet for two hours, and still no sign of life on the iPod. Plugging it into the computer, it immediately showed up in iTunes and synced normally, and even indicated it had nearly a full charge. Still, however, the screen showed nothing. I checked the lock and home buttons to see if it was stuck, but it was not. Does anyone have an idea of what this is? Do I need to get my iPod repaired? Any help would be appreciated.
I am running iOS 4.1, and am out of warranty coverage.
Thanks,
- Justin1; Do a hard rest by holding the buttons at least 15 seconds. Does the Apple logo come on?
2. Hold the power button down for at least 5 seconds. Do you see the battery symbol?
If the answer is no to both questions, you most likely have a hardware issue--possible bad battery.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Please help
Well have you tried holding down on both buttons until the Apple Logo appears on the screen again? Hold both buttons down for about 10 seconds or so and when the Apple logo appears on the screen again, let go of the buttons.
-
serial no is
Hi chelsealynn1205,
If you are having issues with your Mac not booting past the grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
- Brenden -
My iPod touch 4th gen wont turn on it just shows the Apple icon. How do i fix this?? Please help!
iPod wont turn on help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I can't turn my Ipad 2 on, It got the new update yesterday and has not turned on since. Please help
Have you tried restarting, resettng, and restoring as explained in the TS3281 article you attached?
-
I PURCHASED RINGTONES ON MY IPHONE 4S BEFORE I EVEN PLUGGED INTO ITUNES THEN I PLUGGED IT IN FOR THE FIRST TIME AND RINGTONES HAVE DISSAPEARED FROM PHONE HOW DO I GET THEM BACK?
Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My phone is telling me to restore it as it will not come on and just shows a plug into itunes sign...however there is an error restoring it. HELP?!
You might try:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?
Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
TS1363 Iphone just shows the apple and blinks on and off.
Iphone just shows the apple and blinks on and off.
Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen
Maybe you are looking for
-
Cannot render more than 2-3 minutes at a time
I am working with HDV footage, using speed changes, MB looks plug ins. If i try to render an entire time line of est. 10 min, cannont render. shows non responsive, and closes or I get error compiling. I have updated as of today all nvida drivers, the
-
i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound mi
-
I was trying to update. Now I have a screen "Installing Software Update" and it's stuck
Trying to update. The screen has been stuck on "Installing: Software Update" and I can't exit or do anytihng.
-
List of inovices in outgoing payment
Hi All, In the outgoing payment if I enter the date without slecting any vendor it shows me list of some inovices even I have not selected any vendor, does anybody faced same problem? can you please help in this issue Regards, Atul Joshi
-
How do i use the SecurityManager?
I am trying to have an applet display an html page in a JEditorPane, but the applet fails because of AccessControlException. Do i need to use a SecurityManager? If so, how do i go about implemeting it in my code? Thank you in advance! Tarek