HT201210 i have a 3gs and will not let me update its on 4.1
hi i have a iphone 3gs im trying to update it its not letting mr can u help me please its on 4.1
You'll need to give us more precise information than just "not letting me" before anyone can offer suggestions. Post back with full details, including error messages if you're encountering any, and then someone here can probably provide advice.
Regards.
Similar Messages
-
My MacBook Pro has Mac OSX 10.5.8 and will not let me update any further. Why?
I have a MacBook Pro that I purchased in 2009 (It doesn't have a SD card slot, but is an aluminum body). Right now it's using Mac OS X 10.5.8 and will not let me update any further, which means that I cannot install any new versions of iTunes or some other programs. How can I fix this?
Anniematch wrote:
I have a MacBook Pro that I purchased in 2009 (It doesn't have a SD card slot, but is an aluminum body). Right now it's using Mac OS X 10.5.8 and will not let me update any further, which means that I cannot install any new versions of iTunes or some other programs. How can I fix this?
You can't upgrade beyond 10.5.8, that is the final step for Leopard.
You can purchase Snow Leopard (10.6.x) from Apple (but you should have 2G of Ram installed, and sufficient hard drive space). Your Mac is fully capable of running Snow Leopard and will probably already meet the specs I mentioned. -
When I try to update my apps it says sign in required and will not let me update them
I suspect you have apps that need updating that were purchased from more than one account
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
I have used your info to give my two iPads different names. My problem is that my old iPad still has the old email in the Apple ID pop up so it will not let me sign in. I checked my info in the manage my account page and there is my email as primary, which allows me to sign in for apps, etc on the newiPad air, but when I try to update or buy an App on the old iPad, the old email is in the pop up and will not let me sign in.
How do I change the email in the old iPad to match the new iPad????
The Old email is on my manage my account page as a verified ALTERNATE email.We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
Have you created a new account or updated your existing account ? All content that you download from the store is tied to the account that downloaded it, so if you have created a new account then all of your existing downloads will remain tied to your old account.
If you've updated your existing account then try tapping on the id at the bottom of the Featured tab in the App Store app and log out of it and then log back in with the updated id so as to 'refresh' the account on it. -
My email provider has changed and I have a new one.
I amended this on my computer under my Apple iTunes account without any difficulty and it was authenticated. However, I still have the original email appearing on my iphone 4s and ipad2 and I cannot update that information. Neither can I use my usual password to update my Apps. Please can anyone assist me with simple instructions on how to change these important passwords? Thankyou in anticipation for reading and hopefully considering a solution.Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?
-
Java hijacks the flash update page and will not let me update flash
when I use the update page for flash, it quickly passes from that page to the update page for java.com. I am unable to update flash, or even visit the update checker page.
First, please update Firefox [[Update Firefox to the latest version]]
Then visit http://get.adobe.com/flashplayer/?promoid=JZEFT to download and install Flash. Don't accept any other programs or applications the installer tries to bundle (McAfee, etc.) -
the past few weeks my iphone 3gs is randomly telling me i need to plug it into iTunes and will not let me use my phone util i do. Then it makes me restore it all over again. This happens around once a day. why is it doing this?
Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H. -
When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have tried installing the latest Quicktime but it tells me that I have to do software update and when I do, Quicktime does not appear to need an update. I have no idea what to do
Click on your preference and check the Parental tab for possible restrictions. Open iTunes, then click the iTunes menu, select preferences after the window opens click on the Parental icon, take a look at the content restrictions section.
-
Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Helpat the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi. -
i have connected it to itunes like i was told to do and it wont do anything because its locked with a passcode and its frozen on the lock screen and will not let me enter myt passcode and after a while it just shuts off, it has been doing this for almost 48 hours. I was told to hold the home button and power button to shut it down and that I could then restart it and it would work... Nothing has helped, What can I try???
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
If that does not resolve, restore the device via iTunes on the computer.
If all else fails, take the device to Apple (or whomever provides support in your country) for evaluation and possible replacement. -
I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this
Welcome to Apple Support Communities
iTunes in Mac OS X Tiger is outdated. Open > Software Update to install the latest iTunes version for Tiger.
If you need iTunes 10.7 or a newer version, you have to upgrade to Mac OS X Snow Leopard. First, check that your Mac is supported > http://support.apple.com/kb/sp575 If it is, buy Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After buying Snow Leopard, make a backup of your data, insert the DVD and upgrade to Snow Leopard. After upgrading, open > Software Update, and install the latest Snow Leopard version. Finally, run Software Update again to install iTunes 11.0.4. If you want to install iTunes 10.7 instead, download it from the Apple website > http://support.apple.com/kb/dl1576 -
I purchased quick time pro, and attempted to download quick time 7, but it says I have quick time x installed. I deleted quick time x but it still says it is there and will not let me install.
In the optional install items-Quick Time is not an option. I am on Leopard.
Then you either:
1) never had QT X installed and could not have deleted it since QT X is only installed on Snow Leopard (OS X v10.6), Lion (OS X v10.7), and Mountain Lion (OS X v10.8) systems or...
2) you are actually running Snow Leopard (OS X v10.6) and not Leopard (OS X v10.5) as you just stated.
Please confirm which statment is actually correct. -
I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close. How do I restart the ipad?
Hi there, welcome to the site,
I have posted a link below which has instructions on how to do this. They are quite simple, so take a look.
iPad not responding
Regards,
Nathan -
Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)
Have you contacted Microsoft support - http://www.microsoft.com/mac/support ?
-
I am trying to import my bookmarks from IE and have read the instructions, but the Import button under File is grayed out and will not let me import. Any ideas?
* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
See [[Private Browsing]]
Maybe you are looking for
-
I do not understand what is wrong with this function
the error says that I need a ; in fromt of the public void action performed because it is an illegal start of an expression, but it is clearly not an expression. class EnterSerial implements FocusListener, ActionListener public void focu
-
XY graph export image JPEG color PB
Dear. How save a graph in JPEG with a simplified presentation and keep the line color on the picture like "Invoke node: Export images" . To have JPEG image I used the "invoke node: get image" and I put a 1 on the color to simplified the presentation
-
HELP! Bridge crashes when i try to install extentions
Hello Im new to flash and reallyenjoying it My issue is that when I try to instal the photoflow extention, or TN2 gallery bridge just crashes... Can i install manually?
-
Unable to install/update programs
Some time in the last couple of weeks I noticed that I am unable to install or update programs. Each time this is attempted I get an error message indicating that I do not have sufficient permissions. My user account is an admin account and appears t
-
Creating Hierarchy Year-Month-Week-Dayof Week.
Hi, We have a requirement to create new HR report - Labour Efficiency. We require 'Date of work' in BI report. It takes value from CATSDB table, WORKDATE field in R/3. Its Data Type- DATS , Integer length 16, output length 10. But in BI report they w