HT201210 I have an ipad 2 and was upgrading to ios 5. Unfortunately, the cable was pulled out mid sync and now the ipad won't work. When I power on, I get an iTunes icon and a picture of the cable to connect to iTunes. What do I do?
disconnected mid-stream. Now when I turn on the ipad or connect it to the PC, I get the iTunes logo and a picture of the connecting cable (which is plugged in). What do I do?
iOS: Device not recognized in iTunes for Windows
Similar Messages
-
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
-
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
turnbui wrote:
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
Pete -
I updated the software for my iphone4s and now it won't work at all. I just get an apple icon
I updated my software on 4s iphone. Now my phone will not work. Just a black screen with and apple icon. Help please.
Put it in DFU mode and restore it. (google for instructions on entering DFU mode).
-
I have an IPad that is either locked or cant power up. I tried to connect the ipad to itunes via my computer but itunes does not recognise it. Can anyone help?
Try this
http://support.apple.com/kb/TS3281 -
Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
HELP!!!!Zoom in to read pleasebut can not be unlocked
If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T. It CAN'T be used with Tigo or Movistar.
Your post makes very little sense. Maybe you can get some help with English. -
I have a friend who I was helping out with his iPhone. He has since lost it. I believe I backed it up to my machine but have no idea where to find it. Is it possible to find it and read the back-up file without the original device being connected?
If he gets another device - you should be able to restore it from your computer to the point where you backed it up
Otherwise that file cannot be read -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.
Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.
-
When I try to connect my iPod Nano 4th gen to my laptop I get a message that my device may be corrupted and asks do I want to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?
This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock -
Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.
See #Q1 in Using Time Machine with a Time Capsule.
If you have a problem, please tell us exactly what, and on which step there. -
I have an ipad 2, ios7 will not download. I keep getting an error message that just tells me ios wont install, however it does not tell me why. Any suggestions? Thanks
I find the Air easier to work with if I need a keyboard if, for no other reason, that's more compact to carry around than the iPad and a keyboard, even one that is part of an iPad case. I also often have to access data from one application when using another, and iOS is not at its best when having to do rapid application switching (Command-Tab switching is a lot faster than the double press home, scroll the icons at the bottom and swap).
As well, for editing I find the lack of sandboxing on OSX allows for efficiency enhancing utilities across applications, something you don't get in iOS. I understand the reason for that, but while more secure it also creates issues of its own in terms of usability in a number of situations.
I prefer the iPad for totally single application focused situations where little or no input is required. I use my iPad to hold copies of manuals when I'm doing a full day continuing education presentation for CPAs. A MacBook Aire can't really fill in very easily for that usage.
I see them each as tools appropriate for different jobs. -
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
Maybe you are looking for
-
Error while generating PDF in BI Portal
<body lang=EN-GB style='tab-interval:36.0pt'> <p class=MsoNormal>Since 2 days ago we have on our productive BI Portal an error and we <span class=SpellE>can`t</span> find a solution to it. When we try to preview any report we get the <span class=Spel
-
How do I reinstall Snow Leopard without the discs?
I need to change my hard drive and reinstall Mac OS X. I can't install Lion obviously because I first need a platform. I got my MacBook from a relative, but she sent it to me with MacBook Pro installation discs. I tried using them, but every time it
-
I'm new at using Adobe 9 Pro to create .pdf files so your patience is appreciated. Have a 400 page Word 2007 document (policies and procedures) which I convert to Adobe using my styles (not the standard Heading 1, 2, 3 etc.) to create bookmarks. Wo
-
Will TM backup to a destination volume smaller than the source disk?
If I buy an iMac with a 650G hard disk (which is way bigger than I need), can I use TM to backup to a 500G external disk?
-
Set Window Manager hints from Swing/AWT?
I was wondering if anyone knew of a way to set certain window manager hints, specifically to keep a window on the desktop (_NET_WM_STATE_BELOW) and out of the taskbar (_NET_WM_STATE_SKIP_TASKBAR). I've googled around but I haven't yet found anything