HT201210 I HAVE ERROR 1603 WHAT IS IT MEAN

I HAVE ERROR 1603 WHAT IS IT MEAN

This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Similar Messages

HT201210 i hav error 1015 what can i do

i hav error 1015 what can ido

Hi there ebrahim123,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
-Griff W.

TS3694 I have error #6, what does this mean?

I got error #6 on my iphone 4, what does this mean?

This describes error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

HT201210 my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

It doesn't matter when you installed antivirus software; if you have it on your computer it will frequently block access from applications to sites it does not know about. A sync does not require access to a site not on your computer; an upgrade clearly does. So if you have never jailbroken any device you do not need to be concerned about your hosts file, but you DO need to temporarily disable your antivirus during the update process.
The hosts file is an operating system file on all computers that overrides DNS lookup. In order to jailbreak or hack an iDevice the programs that do it need to redirect iTunes so it does not go to the Apple activation server, but instead goes to the hacking program for activation instructions. It does this by adding a record to the hosts file that bypasses the DNS lookup for gs.apple.com. But you don't have to be concerned about this.

TS3694 when im update i have Error 1015 what can i do ?

im try to restore my ifone but have error 1015 what can i do please help

This indicates an unauthorized modification of the iOS and cannot be discussed further on this forum.

I have numerous downloads that say error 8328 what does this mean? This is ridiculous.

How do I get rid of this error and what does it mean?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

Hi all,
My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

The startup drive is failing, or there is some other internal hardware fault.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

After entering the network password (WAP2 Personal), I get (-3906) error. What does that mean? I can I solve the problem?

I had to call my bank. They were aware of the problem with online banking and Firefox 4 and they were able to make adjustments at their end. I now have online access again.

DSPPublishing error -29. what does this mean... I'm trying to burn to DVD

DSPPublishing error -29. what does this mean... I'm trying to burn to DVD

It means – more or less – that the job action (burning the disk) failed.
Sometimes this happens because the app doesn't like something about a background image that is to be used in the menu. If you have such an image, reduce its dimensions. If you don't have one, in Settings in the dialog, cick Add and then Cancel.Some people have found that that alone is enough to kickstart the job action.
Russ

VISA error: -1074003961 What does it mean?

When attempting to set parameters with Agilent's Set PWM Parameters.vi on my new 81626 power head I get this VISA error: -1074003961 What does it mean?
I try the exact same VI with my 81623 Power Head and it works fine. Anyone have any answers?
I have a 8163 Mainframe with two 81619 Interface Modules intalled. In the Modules I have a 81623 head installed in slot 1 Channel 1, and a 81626 head in each of the channels of slot 2.
The error follows the 81626 heads. The 81623 head works fine.

Drugar:
That is BFFC0007, which is not a VISA driver code but is an instrument driver error. From vpptype.h, that seems to say that parameter 7 is what is causing the error. I guess you need to look at the C function prototype to figure out what the 7th parameter value should be.
Dan Mondrik
Senior Software Engineer, NI-VISA
National Instruments

HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

When backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine

when backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine

Expect to see this error again due to a bug in Lion (and Mountain Lion).
See # C17 in Pondini's excellent support document below, or look over to the right of this web page under the heading of More Like This
http://pondini.org/TM/Troubleshooting.html

I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore. I can't find any information on error 1413, what does this mean?

I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore. I can't find any information on error 1413, what does this mean?

Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

While trying to burn a CD of a playlist, the disc was ejected with the message: medium write error. What does this mean?

While trying to burn a CD of a playlist, the disc was ejected with the message "medium write error" . What does this mean and how do I fix it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

HT1414 i get an error 9 what does that mean?

i get an error 9 what does that mean?

This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694

HT201210 I HAVE ERROR 1603 WHAT IS IT MEAN

Similar Messages

Maybe you are looking for