HT201210 I have tried everything and can not get IPad 2 to restore, keeps giving me error message please help!!!!
I had my IPad 2 jailbroken and deleted Cydia from it but still have some apps that are still on my IPad and no way to delete them. I have tried to restore it several times and it just keeps giving me an error message. I have tried deisabling firewall, different usb cords and usb ports. NOTHING! Please help!!!!
Sorry James... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743
Perhaps google can assist you in your quest...
Similar Messages
-
how do i restore my 4s can not get nothing to work
Swipe up from the bottom on the screen to get to Control Centre...
The button on the right is the Rotation lock... Turn it off.
See > http://support.apple.com/kb/ts3805
If unable to turn it off...
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414 -
I have tried everything and can't get this NEW board to start up!!!
Board:
K7N2 DELTA ILSR
P/N 6570-030
S/N K0308003703
When I turn on power, the fans start up, and voltages of +5, -5, 3.3,
12, -12 are all present.
There are no POST beeps, and no video output.
Power can be turned on from front panel, but cannot be turned off.
I have placed FSB jumper into Safe Mode. I have cleared CMOS memory.
I have removed all drives, to simplify troubleshooting.
I have also tried removing memory and video board--shouldn't I still get at
least POST beeping?
BillBill,
I know your case well. It comes with the Antec SL350, which has enough power for your system.
I would try different RAM just to see if you have a bad stick.
Take Care,
Richard -
I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?
You can do it with Leopard but it depends upon the iTunes version which you did not reveal. Also make sure you are looking in the right place for purchases.
Consider buying a backup drive so you do not need to do this again. If you are going to run old hardware and software you need to live differently because yes, at some time you will find your version of iTunes no longer works. You're lucky it still works with Leopard. As you can see, some versions still work with the iTunes Store but not for repeat downloading.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756#24176756
Select the iTunes Store on the left side of iTunes if you have the sidebar displayed, or with the button at the top right.
Click on Purchased on the right side under Quick Links (see https://discussions.apple.com/message/26364186#26364186)
You can re-download your available previous purchases. -
HT201210 I have tried everything and my iphone still wont restore. Does anyone have any resolutions?
I have tried everything and my iphoe still eon't restore. Does anyone have any top tips?
Put iPhone into Recovery Mode and Restore with iTunes on computer. Open iTunes on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click Restore button of iTunes. If any Error messages are given write them down so you can look up cause and solution. If still problem, and if you have Warranty or AppleCare make Genius reservation and take to Apple for resolution.
-
I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
Please my iphone is on the activation page and i can't do nothing, there is a sim card into but itune don't recognise it, and the phone don't want to activate. I tried everything, and before the reboot the iphone 3 was worked verry well. Please help me !
Hello there, rebeccallouche.
The following Knowledge Base article offers up some great steps and links to some additional information that is pertinent when having activation issues with your iPhone:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Additionally, if the iPhone is not being recognized in iTunes this article will be useful as well:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
tried everything and can't get my ipad to charge. How do you reset IPad when battery is completly dead? charger and cable works fine on IPhone.
First make sure you are using the charger that came with your iPad and plug that into a known good wall outlet. Let your iPad remain on the charger for at least an hour. It may take that long before it responds if the battery is completely dead. If using the charger that came with your iPad there are several reasons it may fail to charge.
Bad outlet. Make sure the Utsler has power.
Bad charger. Try a different charger.
Bad cable. Try a different cable.
Dirt in the connector. Check and clean if necessary.
Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
How do I get my security passwords I have forgotten them and can not get envy thing with out them
Fastest way is by contatcing support. This is because youc an't reset the questions on your end if you forgot the original answers.
https://expresslane.apple.com/
Follow these steps:
All Products and Services > iTunes > iTunes Store > Account Management > iTunes Store account security
Answer the questions and if required sign in with your Apple ID and password - same one you used to log in on this support forum.
You will find an option to send an email to Apple on that page. Indicate that you forgot the answers to your security questions and wait for iTunes support to reply. -
I'm trying to activate iMessage on my iPad 2 - I keep receiving an error message saying I need to check my connection even though I am already connected through wi-fi and the connection is strong. Please advise.
Possibly there's a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required. -
I have tried to remember what the first pass word was and can not get it done. i can not send out emails on both of my email accounts [email protected] or [email protected] as both request password. when i have tried to reset master password it will not except any thing that i am doing. i need to send out emails for my work and having trouble doing the change. Please help
The master password protects saved passwords in Thunderbird and has nothing to do with connecting to your providers server. You need to work with your email provider if you have forgotten your email password. Go to their email help site and look for a link to reset your password.
If you are truly working with a forgotten master password this article tells you how to remove it.
https://support.mozilla.org/en-US/kb/master-password -
I have a hdmi dock connector and can not get it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either
With what apps? Not all apps require video output.
-
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
WILL SOMEONE HELP ME PLEASE I GOT A EMAIL STATING EVERYTHING LOOKED FINE FROM ITUNES END, BUT I CAN NOT USE AND SEE THE MUSIC FROM THE STORE/ HELP
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now. -
I have tried everything, and I still get a 13019 error. What now?
So, I have literally tried everything in my power to sync my ipod. I restored it, and it synced everything back on except my music. My apps are there, but not my music. What do I do now? I don't have an alternate computer that I can possibly sync it to.
Bill,
I know your case well. It comes with the Antec SL350, which has enough power for your system.
I would try different RAM just to see if you have a bad stick.
Take Care,
Richard
Maybe you are looking for
-
HP Color laserjet CP3505n loses network connections
My HP Color Laserjet CP3505n used to print flawlessly from 2 computers wired on my network. Now sometimes it says connected, but hangs up when trying to print. Or sometimes it says OFFLINE. Either way, I end up with a queue waiting to print and nothi
-
App from Apex 4.1 to Apex 4.0 - Error
Hi how can i import an application made with APEX 4.1 into APEX 4.0? I get an error: "NOT COMPATIBLE (Your export may contain calls not supported by your application version)." How do i solve this problem? kind regards
-
10.4.3 update - scuppered dock reliability
Morning everyone Since the 10.4.3 update, in 1 out of 3 times using the dock, it'll freeze. never like it used to in the days of 10.4.0 or 10.4.1 - this time making another application active and then switching back to finder will fix the problem, bu
-
Morning Gurus, There is a new system that we want to install as pilot on our test server preoblem is we only have 800M of available space whereas we need atleast 3G. What can I delete in Oracle in order to get more space will it be the datafiles? ple
-
Keylight not working properly in ae cs6 trial
after effects cs6 trial v11.0.2. windows 8. I dont know codes and stuff. i have windows 8..thats all i know. i have another camera but i havent tried keylight on it yet but my problem is with windows 8 right now no error messages following a