HT201210 I need to restore the factory settings for my I phone

I need to restore the factory settings for my I phone

To restore your iDevice, you have two options.
1. Plug into iTunes and select your device and click restore.
2. On your iPhone, go to Settings>General>Reset, and click which one you would like to use.
If your device is locked up and you can't get into it,
1. Open iTunes
2. Power Down your Device
3 hold down your home button and plug in the device to the computer at the same time
4. Keep holding until your device shows the Plug into iTunes image.
5. On iTunes, click restore
Wait for the device to restore to factory settings and your done!

Similar Messages

  • My Iphone 5 screen is cracked and I need to restore to factory settings and wipe all content.  How do I do that?

    My Iphone 5 has a screen that is cracked and cannot be read.  I need to restore the factory settings to send it back to the warranty company.  Please tell me how to do that through Itunes

    Restore your iOS device
    Connect your iOS device to your computer using the cable that came with it.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary pane, click the Restore button for your device.
    Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
    After your iOS device is restored to factory settings, it will restart, and you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore. your welcome

  • I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?

    I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?

    You would only be able to restore to a backup to iCloud or iTunes:
    Restore from Backup
    Cheers,
    GB

  • I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings.  Is there anything I can do?

    You have to restore your iPhone. Same thing happened to me and many others. Sorry man.

  • HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

    please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

    Stop being impatient.
    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You cannot downgrade.
    If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

  • HT1212 My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • I've added to ios6 to my new ipod touch with no problems. I'm trying to now restore the factory settings but the screen is frozen with an itunes sign and lead pointing towards it. The ipod won't even switch off. Can anyone help as it's driving me crazy

    I've added ios6 to my new ipod but tried then to restore the factory settings. It won't extract any settings and the itunes then tells me that the server cannot be reached or is unavailable. I've been trying all day. Now the ipod has a itunes sign and a computer lead pointing towards it on the screen and this is frozen. It won't switch off or do anything else. Any ideas as this is now driving me crazy.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My computer has crashed and I have had to restore the factory settings, without backing up my purchases is there anyway which I can recover purchased downloads?

    My computer has crashed and I have had to restore the factory settings, without backing up my purchases is there anyway which I can recover purchased downloads?

    check out Dave Sawyer's post in this thread.

  • Is there anyway to reset ipad passcode without having to restore the factory settings?

    My little brother has locked himself out of his ipad. Although I am aware we can restore the factory settings he would very much like to save his photos.
    The ipad has never been synced or backed up.
    Is there anyway to do this?

    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • How to restore the factory settings

    The ap 3502i has been registered to the wireless controller, but now want to restore the factory settings, repeated after the upgrade or will appear before the registration information of the wireless controller, the problem how to solve
    thanks

    Two other ways besides what scott metnioned:
    1. Through the MODE button:
    - Power off the AP.
    - While keeping the MODE button pressed, power on the AP.
    - Still keep the MODE button pressed until the Status LED turns to red and then release it:
    2. Via installing the recovery image:
    - Download the recovery image for 3500 from Cisco site.
    - on AP Console write the command "Debug capwap console cli".
    - Then write the commadn "Archive download-sw /overwrite /reload tftp:///"
    Reference: https://supportforums.cisco.com/docs/DOC-18208
    (question 10).
    HTH
    Amjad

  • My iPod touch 5th gen won't turn on past the apple logo, do I need to restore to factory settings? If so, is there a way to save my photos?

    I've had my iPod touch 5th gen for a little over half a year now, haven't had any issues until now. Yesterday it randomly shut down, and when I try to turn it back on, the apple logo shows up but the iPod just stays on that screen, it doesn't turn on any further. I think I might need to restore it to the factory settings to get it to work again, but I'm concerned that I'm going to lose all my photos. I found the backup folder in my computer but it doesn't have any files in it. I have over 600 pictures on my iPod and I really don't want to lose them all. Is there a way that I can either get my iPod to work again without restoring, or a way that I can extract the photos without the iPod actually being in functioning condition? The computer doesn't recognize the device when it gets connected via the USB. Thanks!

    - Connect the iPod to your computer and try to make a backup
    iOS: How to back up and restore your content
    - Next reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    and try making a backup again. If you can't then there is no way of getting the info off the iPod unless data recovery company can do it. Not cheap.
    - If photos are in an existing iPod backup (iTune>Preferences>Devices  for iTunes backup or an iCloud backu) then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • How to save contacts and messages if i need to restore from factory settings?

    so after a hectic 2 hour talk with apple and i message not working, we figured out that my restore from my backup was the problem and we needed to restore the phone back to factory settings. so how do i save the important things like contacts and messages and return them to the phone?? i dont want to use iclouds i prefer backup on a computer. please help

    use icloud to back it up go into setting then icloud scroll down and make sure you back it up or plug it up to your comp and click backup when itunes pops up

  • Itunes keeps saying I need to restore to factory settings

    I had been using my car stereo ipod usb connection to listen to music from my phone. The last time I used it, it said I had no music. So i turned my phone off and it never turned back on, it was stuck on the apple logo, i tried everything, eventually my phones battery drained. so i looked up how to restore my phone and it said to hold the home button down and plug into itunes and it would begin a complete restore, which it did. i was able to restore my last backup. well today i wanted to download some music and when i plugged in my iphone to itunes it said, i cant remember word for word but basically it was telling me i needed to restore my phone to factory settings. so i figured well maybe it really didnt work last time so i went ahead and did it again. everything went back to factory settings, and when i went to sync my phone i get an error saying something it couldnt sync with this iphone and something about a file and not a folder can be found. so i disconnected my phone and reconnected and again the first thing that pops up is that i need to restore my phone. im so frustrated i dont know what to do! did i kill my phone?!?

    To restore your iDevice, you have two options.
    1. Plug into iTunes and select your device and click restore.
    2. On your iPhone, go to Settings>General>Reset, and click which one you would like to use.
    If your device is locked up and you can't get into it,
    1. Open iTunes
    2. Power Down your Device
    3 hold down your home button and plug in the device to the computer at the same time
    4. Keep holding until your device shows the Plug into iTunes image.
    5. On iTunes, click restore
    Wait for the device to restore to factory settings and your done!

  • HT1222 i am having trouble restoring the factory settings on my ipod touch...any suggestions?

    i am having trouble restoring my ipod touch to factory settings...i am connected to the pc, pc is recognizing unit in restore mode, but will not do anything else...any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all media and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • My computer won't allow me to restore the factory settings.What am I doing wrong?

    I am trying to restore my computer to the factory settings, but it won't allow me to erase everything from the hard drive. It won't even allow me to delete me as a user. What am I doing wrong?

    You can't erase a volume while booted from it. Start up from the installation DVD, erase the volume, and reinstall.

Maybe you are looking for

  • Cannot Edit a Form in Adobe Acrobat Pro Xi - use Livecycle

    Hi all, I was advised to buy Adobe Pro XI yesterday by the Direct Sales Adobe team because it includes "everything I need" to create and EDIT PDF forms.  I actually rang up to buy X but was told it was now XI. I tried to edit a form today and got thi

  • Can't submit plsql scripts in SQL developer

    good morning i use sql developer 1.1.5.4 . when i want to run tutorial.sql , it dosn't work : "The target tutorial.sql cannot be started because it is not a runnable target." tutorial.sql is a script I made , pasting the help example to create the bo

  • Firmware Upgrade on X6270 Blades

    I have a Sun/Oracle 6000 series blade chassis as well as ten X6270 blades and I would like to upgrade the firmware on the chassis as well as the blades themselves but have never done this before. Can someone please tell me exactly what downloads I wo

  • 2010 / 2012 coexistence

    With the addition of Exchange 2013 to our environment, we need to add a new DPM 2012 server.  Are there any issues with DPM 2010 and DPM 2012 coexisting on the same domain?

  • Syncing my usb thumb drive

    I have a usb thumb drive that has all of my college work on (backed up of course), but is there anyway to get arch to sync with this drive and say have a folder on my PC that whenever the usb thumb drive gets plugged in, the folder gets updated to ha