HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Similar Messages

I tried to upload a jpeg photo as an attachment to an email and received the message that icloud could not upload it. What can I do to attach a jpeg to an email?

When I try to attach a jpeg to an email, I get a message that icloud will not upload and to compress the image, but when I compress the image and try to attach, I get the same refusal to upload the image. How do I fix this problem?

Are you trying to email from inside iPhoto? If so what version of iPhoto are you using and do you have iPhoto set as the email client in the General preference pane?
If you're runnaing a version of iPhoto that has iPhoto as a email client option and it's set go into the Accounts pane and delete the iCloud account, close iPhoto, reboot, relaunch iPhoto and add it back.
The other option is to set Mail as the email client. This will give you more mailing options than you had with iPhoto as the client.
If you're using Mail from outside of iPhoto try removing the accout from Mail's Accounts prelference pane and then add it back.
OT

I RECEIVED AN ERROR MESSAGE THAT I COULD NOT MAKE OR RECEIVE CALLS AND I HAD TO RESTORE VIA ITUNES. I HAVE DONE SO AND LOST LOADS OF APPS ETC (MY FAULT FOR NOTBACKING UP) BUT STILL UNABLE TO MAKE OR RECEIVE CALLS.

Phone is only a few months old and was working fine last night - it ran out of battery but on being charged up this morning it was effectively locked. I received an error message that I could not make or receive calls and I had to restore via itunes. I have done so and lost loads of apps etc (my fault for not backing up) but still unable to make or receive calls. Anyone had anything similar and can advise who I should contact or what I can do.
Thanks,

try contacting your carrier and see whats going on.

HT202879 I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you.

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

When I open iTunes I receive a message that says error 4002. How do I correct this error?

When I open iTunes I receive a message stating: "we could not complete your iTunes Store request. An unknown error occurred (4002). There was an error in the iTunes Store. Please try again". I have uninstalled an re-downloaded iTunes and all its' components as recommended by an Apple support tech. This did not work, still getting error message. What to do?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Hey corrafromlondon,
Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
How to install OS X Yosemite on your Mac - Apple Support
you can find the Yosemite installer app in your Applications folder or Launchpad.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Trying to login to Adobe Connect and receive the message that your account has expired.

Trying to login to Adobe Connect and receive the message that your account has expired.

Hi,
The tenure of your account must have expired. You can contact Adobe Connect Support to extend your account's life.
Thanks
Sameer Puri

Phone wasn't plugged in and receives a message that my phone hasn't been backed up in 30 weeks. I usually get a message that my iCloud is full when I plug it in. But it was 4 in the morning and it just sent me a message out of the blue.

Phone wasn't plugged in and receives a message that my phone hasn't been backed up in 30 weeks. I usually get a message that my iCloud is full when I plug it in. But it was 4 in the morning and it just sent me a message out of the blue. Is this normal?

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

I updated my phone, received an error message that it couldn't update completely, now I see a red ITunes icon and picture of a plug

I updated my iPhone today, received an error message that the phone did not upload correctly.
Now I see a red icon for ITunes and a picture of a USB

Hi c1golden,
If you are getting a screen such as you describe after attempting to run an update for your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you can't update or restore your iPhone, iPad, or iPod touch
Thanks for using Apple Support Communities.
Best,
Brett L

Hi, I tried installing the new software update to my iPod touch this morning, got an error message that I could not finish installing it, and now my iPod is completely unresponsive, please help? It won't respond when I plug it into iTunes or anything.

Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!

Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem.

HT4623 When trying to sync my iphone 5 I continue to get a message that there is not enough room to sync. How do I remove old podcasts to create room

When I try to sync my podcasts to my iphone 5 I keep getting a message that I do not have enough room. How do I create more room by deleting old podcasts?

i used to get that problem with my old iphone!
you just need either to delete apps, videos, and also podcasts until it alows you to sync.
hope this helped you.

Cannot open itunes. receiving a message that MSVCR80.dll is missing. tried to reinstall but still unable to open.

Recently updated itunes; unable to open itunes; receiving following message: MSVCR80.dll is missing.
Ttried to reinstall itunes but still cannot open. Any suggestions?

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

Similar Messages

Maybe you are looking for