HT201210 I up date my iphone 3G in time on my iphone 3g screen only USB cable photo & itunes name show.Ple. what can i do for restart my iphone.
When i up date my iphone 3G in itunes this time on my iphone 3G screen only USB cable & itunes name sceen & my phone in not working ple . send me what can i do ? thanks.
My mail ID is [email protected]
Similar Messages
-
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number? -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
i iPad 3 fails to recognize cellular data In a number of locations Displays "searching and No Service" I have narrowed this to device problem. What can I do?
Hello there, OSOSANYA.
The following Knowledge Base article provides a great checklist of steps and additional recommendations for troubleshooting issues with cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Centre button is not working properly in my iphone . . what can i do for that ?
centre button is not working properly in my iphone . . what can i do for that ?
Get it serviced.
-
after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?
Download 9.1 and 9.2.3 updates and install them
-
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
hi! i have a iphone 5s in t mobile but now i live in mexico city, what can i do for unlock this iphone and have a signal in telcel, please helpme guys! i lost mi sim
What do you mean? Your only way to unlock that phone is to have had 40 days continuous service with T-Mobile and then process the unlock through them. If you had an account with T-Mobile you should be able to login and process your unlock. If you did not you can click on the chat program but they are going to tell you the same thing.
-
i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends
Hello vinoth1986,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
If you can't update or restore your iPhone, iPad, or iPod touch
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
The ussd code doesn't work on my iphon since i update to ios 7.0.3 what can i do for this problem?
the ussd code doesn't work on my iphon since i update to ios 7.0.3 what can i do for this problem?
Maybe
SOLUTION: circle with red square Some Music Won't Play After...: Apple Support Communities -
Don´t sync all my songs, from a list 3 songs don´t pass to the iphone, but i see it in my computer in Itunes... What can i do??
What happened to them? They can't just disappear? Have you changed computers or re-loaded the OS since the last time you synced? Do you have a backup of your computer from when they were present in iTunes? Were they ever present in iTunes?
-
i can try to active my iphone 3gs but this massage displayed "We're sorry, we are unable to continue with your activation at this time" what can i do for it?
That's almost always because the phone was hacked to illegally unlock it.
-
My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this
Hi Ravihara,
Thanks for visiting Apple Support Communities.
If your iPhone is not working with a SIM card inserted, I recommend these troubleshooting steps:
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.
From:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Best Regards,
Jeremy -
I lost all my data when upgrading my iPad to iOs5. App Store doesn't recognize that I already purchased pages. What can I do other than repurchasing?
It shows "You do not have any purchased apps available to download" Can I show apple the credit card receipts for apps purchased from them? How would I find any previous account login info?
-
By updating to IOS 6.1 something went wrong. The rsult is that I have picture of USB cable and Itunes on my Iphone and the PC does not recognize it. What can I do ? Pøease Help. My Iphone is dead !
you may have to do this a couple of times http://support.apple.com/kb/HT1808
Maybe you are looking for
-
After updating to 6.1, the passcode doesn't work.
After updating Ipad2 operating system to 6.1.3, the passcode appears to be incorrect. It shows message " Ipad is diabled" try in 60min.
-
Defaulting fiscal year in GR55 reports
Hi Experts, I had a requirement in defaulting the fiscal year to 2011 in our client's GR55 trial balance. What I did was, that I got the relevant variable (YEAR) and in GS12 changed the default value as 2011. Then when the report was run the fiscal y
-
I have an existing LAMP server running Ubuntu and Apache. I serve a web site off of it, I have it setup for virtual domains, 2 different domains run off of it. I installed Oracle 10g Express and APEX 4.1 per the instructions and restarted Apache, act
-
Disappearing Tables in Terminal Server after reboot/log off
After installing Crystal Report in Windows Server 2003 Terminal Server, I can stand in front of the server (as administrator) AND/OR Terminal into the machine as administrator and create reports. Once I log off my TS session (or reboot the machine),
-
Subject of the Email (CHARM/ServiceDesk)
Hi, from what I have seen, the subject of the mail sent from my smartform is taken from the Description field of the smartform. Is there a way to do something like a dynamic subject ? Like prio or subject of the message. Kind Regards Dirk