HT201210 Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?
Im trying to update my ipad using my PC, i get this error message 'the software update software could not be contacted or is temporarily unavailable' what do I do?
Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?
Similar Messages
-
Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Mavericks Update - Error message - The product distribution file could not be verified
Help!
Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
Now I'm getting an error message - 'the product distribution fil could not be verified'
If anyone can help that would be great.
Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.
-
every time i try to update itunes i get this error message The feature you are trying to use is on a network resource that is unavailable then asks me to find the folder containing the instalation package ITunes.msi
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I've been trying to restore my phone the whole day and every time that's about to finish the extration this message comes up " The iphone cannot be restored at this time because the iphone software update server could not be contacted or is temporarily unavailable"
Do anyone know if there's a way to fix this? It's in DFU mode so I can't do anything with it anymore, i have no phone.
Please help.Windows user? Maybe you should check your HOSTS file to make sure nothing is stopping you from contacting Apple's servers - though if you're not looking to update you might still be out of luck. Also, maybe disable IP blacklist apps like PeerBlock just in case they're interfering with your connection to Apple.
-
I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internetSee
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers
Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum. -
keeps saying "ipod update server could not be contacted or is temporarily unavailable" when i try and restore my ipod touch..any ideas?
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
i can not resore my ipad 2? the message i keep getting from Itunes 10. is "ipad cannot be rstored at this time because the ipad software update server could not be contacted or is temporarily unavailable". What can I do?
Just in case, let's try the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.) -
I got a new ipod touch for Christmas.
Today I was going to put music on it, i was told there was updates.
So I went ahead to do them.
My Ipod is stuck on the screen with the usb cord pointing to the itunes logo.
In Itunes i'm told :
Itunes has dected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
Turning the ipod off - the same screen appears when it's back on.
When I click restore ipod and after restore and update is clicked ; Extracting software loads up at the top.
When its done this is the message I get:
The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.
I've been looking up trying to figure it out myself and have read making sure a setting in Lan Settings in Internet Properties has ; Automatically detect settings checked. I still get the same ipod message.
I've tried holding the power and home key to turn it off, then powering it back on. But that doesn't work.
I installed itunes today, so its up to date - I checked.
I don't know what else to do.
Can someone help me out, please? :}
The operating system was ios 5 something? It wanted to update to 6 i believe.I've tried the top part but now that i've looked to the bottom:
Additional Information
The “hosts” file may also be blocking gs.apple.com.
Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
I put this in the url bar?
When it gives me the list of names, im not sure what to do from there. The steps aren't that clear for me. -
I cannot download updates to Photoshop Elements 9. I get an error message that my serial number is not recognized or eligible. Can you help with this?
Hi,
Which operating system are you running on?
What updates are you trying to download?
The last update was 9.0.3 - check by loading the editor and going to Help -> About Photoshop Elements
The last supported Camera raw is ACR 6.5 - check by loading the editor and going to Help -> About Plug-ins -> Camera Raw
Do you have a reason to update?
Brian -
May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"
Thank you.Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)
Maybe you are looking for
-
Suddenly Can't Connect to the Internet
Hello, Recently, my Airport Extreme died so I replaced it with a Netgear router. Both my iMac desktop and laptop were picking up the signal. Now the desktop is working fine; however, my laptop (iBook-G4) has completely stopped picking up the network
-
How to magane content of a specific page
Hi I am using Facelets and in my template I have footer, header, navigator and content. How can I set the content.xhtml manually? To understand my requirements, let me tell you that this content is always populated by HTML from a remote website but t
-
Giving my iPad to my Mom........
I want to give my iPad to my mother and get a bigger one. I know a restart will erase my stuff in the iPad, but what about iTunes when she first plugs it into her computer? She won't get my iTunes library or Apple account will she? How do I reregiste
-
Hidden/Missing Text - Acrobat Pro
I have Acrobat 9 Pro for my Mac. I created a PDF from a blank page. My document has an opening paragraph, and then a list of 100 + names. While I see my PDF is three pages long, the two and a half pages with the names are blank. Is this part of Metad
-
Hi all, Can any body please suggest me the steps to capture the SOAP envelope using XML SPY? Also while sending a SOAP request through XML Spy to server, i get an empty response. I tried to monitor the packets passing through the network card with th