HT201210 iPad 2 restore error 1600

iPad not powering up when restore comes up error 1600

See here
Plug your device into a USB that you have not used before and see if it tries to install the drivers for it automatically. If it doesn't or you dont have a usb that you have not used before then see here on how to proceed.
http://support.apple.com/kb/TS3694
It relates to either a faulty connection or more likely a usb port not behaving correctly.
Try a different USB port - test the cable itself by plugging in and seeing if its charging.
Open itunes - put your device into restore mode and then connect via cable and a different usb port.

Similar Messages

My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

IPad Restore Error 1600, 1601.

Hi, receiving errors 1600, 1601 when restoring iPad1 despite using latest iTunes, OSX and troubleshooting USB connections and ports. Any ideas people? Thanks!

I just experienced the same errors on a restore, tried multiple times. Someone came up with the suggestion to try it on another machine. I loaded iTunes on an older PC, attached my iPad and it started and finished in short order the restore. I moved the restore file from the original pc to the older one in the same location as it was on the unit that gave me the errors. Then when it worked, it attached to the original machine and synced my apps back that were in that iTunes version.

HT201210 how to bypass error 1600 during the restoring of my Ipod touch 4g

how to bypass error 1600 during the restoring of my Ipod touch 4g

Next try;
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPhone 3GS won't restore (error 1600 or "not eligible for this build") no apple logo, recognised in DFU mode.

My iPhone 3GS decided to turn itself off (on 30% battery) yesterday and hasn't turned on since. After some testing (hard resets, DFU mode), tiny umbrella recognises it in DFU mode, as does Redsn0w. neither devices can successfully kick the phone out of the restore loop.
The screen stays blank throughout, no apple logo, connect to itunes logo etc. however every now and then the charging sign will appear (empty battery with a little bit filled (red)). even if i unplug it from my iMac the charging symbol stays there.
once I get the phone in DFU mode iTunes recognises that there is a phone connected that needs to be restored, it doesn't matter if I click restore or option + restore the process will fail on Error 1600 or "this device is not eligible for this build".
My iPhone is not unlocked or jailbroken. Before the incident with the coffee I managed to synchronize and update its firmware as indicated by iTunes. The latest update for my iPhone was iOS 5 firmware. My intent is not to unlock or jailbrake the device, just to make it work again.
Here are some things I've tried since:
1. Exiting recovery mode via Tinyumbrella
2. Entering DFU mode via Redsn0w
3. Shift + Restore and using firmwares from 5.0 to 5.0.1 to upgrade my iPhone.
4. Remove hosts to my Host file (in relation to the "device not eligible for this build" issue)
5. Try redsn0w and use IPSW to see if it is recognized by iTunes (iTunes recognizes the iPhone but then at the very last minute shows error 1600.
6. Save SHSH files and use Tinyumbrella to uploaded them to my iPhone.
I would really appreciate if someone can help me on this. I might be doing something wrong or maybe not even considering the right steps to solve this issue. I don't know if there are missing drivers that are preventing the device from communicating with iTunes properly. Of some tool that can be used to correct this problem. It may or may not be fixable but I think it is worth the try.
Thanks very much.

please ignore the comment about coffee. Someone posted a very similar question apart from he spilt coffee on his phone, I didn't.

Ipad froze, restore error 4013

My iPad Air was in "frozen" mode when I tried to turn it on yesterday morning. I have tried multiple times to re-boot via on/off and home button combinations as well as the iTune restore.
All updates have been installed on my Mac laptop - (latest iTunes and OS). I've tried the "restore" 6 times and continue to get the same message "iPad could not be restored, unknown error (4013)". I have the Restore error instructions to install latest iTunes, restart computer, update OS, use differ USB cable....(I don't have a different PC to restore to). Lastly, use another USB power/cable.
no change.... still no boot or restore, or recovery.
ANY suggestions!!??

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

IPAD 2 Restore errors 4005, 4013

I have tried three different computers ( W7 en W8 ), fresh install itunes on one computer, latest version update on other two, different cables.
After reading some forums:
Running Itunes as administrator.
Also manually downloading ipsw files and with shift key trying to restore from file.
Itunes continually gives errors 4005 or 4013.
Sometimes I get a screen:
(FTL:MSG) APPLE NAND DRIVER (AND) RW
(FTL:MSG) FIL_INIT            OK
(FTL:MSG) BUF_INIT            OK
(FTL:MSG) FPART INIT            OK
read new style signature 0x43313141 ( line:389 )
(FTL:MSG) VSVFL REGISTER        OK
(WMR:MSG) METADATA WHITENING IS SET IN NAND SIGNATURE
(FTL:MSG) VFL INIT            OK
(FTL:MSG) VFL_OPEN            OK
(FTL:MSG) YAFTL REGISTER        OK
(FTL:MSG) FTL_OPEN            OK
(NAND) _publishServices:642 FTL capabilities: 0x00000000

If you are getting the same error codes with different cables and computers then contact Apple, it may have a hardware problem : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

HT201210 iphone 5 Restore Error -1

iphone 5 Restore Error -1 Not Update Firmware

Error -1 generally indicates a catastrophic hardware failure. You'll need to bring your phone into Apple or whomever provides warranty service for the iPhone in your country.

IPad 3 restore error

Hi
Anyone else having an error with the DISCONTINUED iPad3 third gen Wi-Fi? Mine is only 16 months old, so nicely timed (just out of warranty)
If I let the battery naturally run out, it goes into a 'shut-down' mode. It will not turn back on. I plug it into the charger and the white apple appears, instead of starting up it shuts back down. And continues to do this for about an hour until the 'connect to iTunes to restore image appears'. I plug it into a computer and restore it. I have had to do this multiple times now. Now I try not to let the battery run out—but I shouldn't have to fear this. Even restored It is still not working right, sometimes it just decides to shut down and restart while I'm using it.
Both the iPad and my computer are all up to date with the latest software.
Is anyone experiencing this? Or know what this issue may be? I am planning on taking it in to an apple genius bar. But I would be interested to know if there are others like me dealing with this as well.
Cheers,
Caroline

Error -1 means a hardware failure. You'll need to bring your phone into Apple or an authorized service provider in your area.

IPad 2 Restore Error (-1) with iOS 5.1.1

Hello there everyone
My iPad last night seemed to get itself into a restart loop so I plugged it into iTunes to do a restore. The restore goes ahead and it verifies, extracts and does all the usual steps up until it says "Restoring iPad Firmware". Here it seems to get stuck for a few minutes until it throws an error: "The iPad "iPad" could not be restored. An unknown error has occured (-1)." I have tried pretty much everything in terms of resolving a restore issue such as switching USB ports, restarting iTunes, restarting the computer, changing USB cables, activating "DFU" mode and so on. Nothing. I have looked after this iPad very well, it was a gift, its been in a case its whole life, I travel around with it in a sleeve and I haven't dropped it or done anything that could of caused an issue.
It is still under warranty, this is a replacement unit I got when my first iPad kept throwing up an error 9. I will obviously take it in if there is an issue, however, I can only get to the nearest Apple store in a few weeks.
Much appreciated to anyone taking the time to read this and possibly help me find a solution.
Cheers
Chris

No, I have never jailbroken it, I did read something mentioning that being related to the issue, however, because I have never jailbroken it, it probably isn't related to me.

IPad update/restore error and itunes no longer recognizes device

I just updated my iPad to 5 today. An error occurred during the restore and it is now stuck on the "connect to itunes" screen. I have followed all the instructions to restart my iPad but now itunes will not recognize it. When I follow these steps, the connect to itunes screen comes on but itunes does not start on my computer. When I open itunes, the ipad is not listed as a device. I've researched a ton of threads and have tried the following with NO success.
Different USB
Verified current version of itunes
Verified & restarted AMDS
Reinstalled itunes
Temporarily disabled security software.
Ran msconfgs
I am so frustrated that nothing has worked and my iPad is still stuck. I wish I had never done the update. Please help!

Unable to update or restore
http://support.apple.com/kb/ht1808

TS3694 iPad cannot restor. error 3014. What should I do

iPad cannot Retore after update to IOS7. Error 3014 reported. What should I do

Are you trying to downgrade iOS? If so, you cannot. Read about iTunes errors here: Resolve iOS update and restore errors

My ipad isnt restoring, error code 1611, is there a fix for this?

Itunes no longer recognizes my ipad on my computer, I used my friends computer and it gets as far as restoring but says unable to restore rror 1611
Any help is much appreciated - windows 7- desktop - Ipad 1st gen

Apple has some tips here that may help:
http://support.apple.com/kb/TS3694#error1611
Regards.

HT201210 iPhone 3G restoring error code "1015"

I am getting the error code "1015" and this webpage is not helping me AT ALL. Any help? I get the code when trying to restore my iPhone 3G.

This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

HT201210 ipad 2 GSM error updated to ios 6.1.2 from 4.3.3 or 5.1.1

"this ipad Vienda could not be updated. this device isn't eligible for requested build". why my ipad 2 cannot update to ios 6.1.2 from 4.3.3?? tq

bad news.... after one week the Apple service provide asked me to pick up the Ipad...but with no maintenance due my IPad was purchased in USA and I need to go to USA to Maintenance...(with the knowledge and approval of Apple Brazil).
I have no more IPad!!!!
Well, I cant believe!!!!! we are in a globalized world, we are talking about a multinational company.... whats happening here???
Ok, no problem APPLE!!!! now I´m very frustraded and disapointed with you!!
NEVER MORE I will buy Apple equipaments again...

HT201210 iPad 2 restore error 1600

Similar Messages

Maybe you are looking for