HT201210 iPad is completely blocked
My iPad is completely blocked. Error message "iCloud Backup" as iPad hasn't been updated for 4 weeks. I cannot update it as screen is blocked and I therefore cannot change setting from Airplane Mode. I cannot even reboot as iPad doesn't respond to slide to power off.
Thank you for your help!
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
Hi there
for some reason(I dont believe I have been in any dodgy sites) im getting **** pop ups when I am in safari
I have tried blocking in my ipad pop up blocker- no success
and also by setting age restrictions in general security- no success
the sites are from 2 main sites
www.xxxtv.mobi/indexnb.php?.pid=202298
and
fuckbookofsex.mobi/go/p439878-pmo-sbrop
please help this is driving me crazy
thanksPop-Ups windows are effectively being blocked in Safari, but some web-sites have updated their sites to open a window when you click on content on their site. This is not a Safari issues it is a web-site issue. I am not sure on how to stop these without stopping other features on the browser. You can get more information about this by clicking here. http://en.wikipedia.org/wiki/Pop-up_ad
-
How to disable the complete block on the selection screen
Hi,
I want to disable the complete block of selection screen when user checks on box...how shall i go about this?
I tried using block name as screen name and then modify screen but of no use..
Any Pointers...
Regards
GunjanSELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS: box as checkbox USER-COMMAND ch.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: path(150) MODIF ID id1.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
IF box = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ID1' .
screen-active = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-group1 = 'ID1' .
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Hope it will work
Regards
Sugumar G -
After downloading a movie to my iPad it is blocked with the word "processing" under the movie icon. What should I do?
Do you not want a backup of the iTunes content on your computer in the event the iPad is lost, stolen, or simply fails?
-
My iPad is completely frozen up, and I don't know what happened, or how to unfreeze it
I can click the home and sleep button, but the home button does nothing, and the sleep button works but when I touch it again, it goes straight back to the app I was in,
Can someone please help me?A reset should help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
I do not want Bing in my computer.
I get angry and uninstall the new firefox because i can not keep bing at bay. Every time I go back and install Firefox because I do not like Opera I have Microsoft's Bing invading my system as yahoo search or bing.
I want to know what are the host files I need to enter, so I can completely block this search engine virus that keeps invading my system.For the record: Yahoo search is Microsoft Bing, with a different name.
Yahoo search was a great search engine in the past, that knowledge was given to Microsoft to improve Bing, and Yahoo signed an financial agreement with Microsoft to use Bing.
I can remove Bing, but it always returns in 6 hours, or in several days. It has the qualities of malware, in that it keeps reappearing. There is no method I can find of keeping Bing search off my system, other than to not install Firefox.
Application Basics
Name: Firefox
Version: 34.0.5
User Agent: Mozilla/5.0 (X11; Linux i686; rv:34.0) Gecko/20100101 Firefox/34.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Graphics
Adapter Description: X.Org -- Gallium 0.4 on AMD RV670
Device ID: Gallium 0.4 on AMD RV670
Driver Version: 2.1 Mesa 8.0.5
GPU Accelerated Windows: 0/1 Basic
Vendor ID: X.Org
WebGL Renderer: X.Org -- Gallium 0.4 on AMD RV670
windowLayerManagerRemote: false
AzureCanvasBackend: cairo
AzureContentBackend: cairo
AzureFallbackCanvasBackend: none
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 1
browser.places.importBookmarksHTML: false
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141203173539
browser.startup.homepage_override.buildID: 20141126041045
browser.startup.homepage_override.mstone: 34.0.5
dom.mozApps.used: true
extensions.lastAppVersion: 34.0.5
media.gmp-gmpopenh264.lastUpdate: 1421161010
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1421161010
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1420584204
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1420584204
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
--------------------- -
HT1414 ipad is completely black. Cannot turn on.
My iPad is completely dead. It was charging overnight, then tried to use it today and would not turn on.
Was it charging by being plugged directly into an electrical outlet, or was it plugged into a computer USB port.
If the latter, then this can actually drain the battery when the computer is in sleep mode. Suggest you plug directly into a wall outlet and wait minimum 20 minutes (perhaps as much as an hour) and see if it will turn on then.
If it was plugged directly into an electrical outlet overnight - did you hear the charging noise when you first plugged it in? If not plug the charger into an outlet that you have confirmed works. THEN plug it into your iPad. Now wait 20-60 mins and see if you have better luck. -
IPad goes completely black while using it, comes back in a few seconds
iPad goes completely black while using it, comes back in a few seconds battery doesn't hold charge either
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe
-
HOW TO COMPLETELY BLOCK TEAMVIEWER CONNECTION
I use ASA Firewalls within my organization, i need help on how we can completely block teamviewer connections in and out of my organizations network.
thank youHello Salawu,
There has been a lot of discussions about these and what I can tell you from that is Team-Viewer is an application that is really difficult to block as it jumps from port to port to be able to reach their servers to the point they can use Port TCP/80 and I am quite sure you do not want to block that.
Some people have talked about instead of filtering the traffic to their IPs (as there are many many) to use DNS inspection with regex and then block their domain instead.
Note: Check this post for that
https://supportforums.cisco.com/discussion/11536791/block-teamviwer-cisco-asa-5520-82
I have even seen that it can jump to port TCP/443 (HTTPS) where the traffic goes encrypted so the firewall will not be able to filter this as the traffic will not go in clear text.
The only way You could make this happen is if you have a Next-Generation Firewall and you implement the CX module to be Fully Application Aware and filter the Team-Viewer application (You might even enable SSL Decryption in case it uses port 443).
I hope this answer helps you and remember to rate my answers :)
Regards,
Jcarvaja
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance contact us at http://i-networks.us -
My iPad is COMPLETELY frozen! :(
Hello, yesterday, my iPad froze completely after I tried to connect with iTunes, first, I did the soft reset, it still wasn't working, then the hard reset, nada. Now, everytime, I do a hard reset, the connect to iTunes image appears, then I connect to iTunes, the image vanishes, it is COMPLETELY frozen! Help!
*Markus McLaughlin*
*@MarkusMcLaughln (Twitter)*
marknetproductions.net
*Hudson, MA, USA*So much for the "go ahead, just play around with it, you can't break it..." school. Good luck with it.
Cheers- -
How do I completly delete from ipad purchase completely gone
How do I completly delete from ipad purchase completely gone
you can delete an app from your iPad by: locate the app's icon on your home screen, touch and hold the icon until it starts to jiggle, touch the small x that will now appear at the upper left of the icon.
Note that while this deletes the app from you iPad it will still appear in the App Store under Purchased.
If you are synching your iPad to a computer, you can go into the App Store from the computer and make the app "hidden", but you cannot get entirely rid of the record that you purchased this app. -
Blackberry not responding - completely blocked
Hi,
My Blackberry (bought last January) has completely blocked itself during a phone call (speaker went on and call couldn't be ended). Since then, it works not at all. I tried to reset the phone and also to update the software. Then it worked for a couple of days and then again it blocked itself during messaging. The keyboard is not reacting (as if it is on unlock), if I restart the BB, I cannot even enter the password although the screen seems to be intact (screen appears only visible when I take it out of the leather case).
HEEELP!ok. It sounds like what I have seen multiple times on a device with moisture damage.
Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
It really is more common than you think.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
*Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi my ipad has been blocked and is saying go to itunes what does that mean and what do i do
hi my ipad has been blocked and is saying go to itunes what does that mean and what do i do
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
My ipad is completely frozen (cant do anything) stating Not enough storage. It states I can manage my storage in settings, but everything is froze up. What can I do?
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
This ipad cannot complete the activation process press home button and start again
this ipad cannot complete activation process.this error am getting after restoration of ipad 3 any help
imei 013316009591665Hi jjpatos,
If you are having issues activating your iPad, you may find the troubleshooting steps outlined in the following article helpful (the article is aimed at iPhones, but should apply to activation issues with iPads as well):
Get help activating your iPhone
Regards,
- Brenden
Maybe you are looking for
-
Which is better, Apple Mail or Outlook?
I've been happily using Outlook for quite some time for a couple of reasons. One, when I migrated from PC, I was using Outlook, so I continued with it on the Mac. Two, it did some things better than Mail, like messages with pictures and particular
-
Update using a Function in select satement
Hi Is it possible to do follwing . i have tabele and a custom fucntion , the custome function will update the column(amount) in the table a based on the value pass through the function from the select statement . select id, amount , outstanding from
-
Hi, I'm currently trying to package Adobe Pro 9.4.5 I have started with 9.3 and am running the below script (This is what I found on the adobe forums) for the updates to 9.4.5 When then attempt to install the MSI I recieve this error: "Error 1308. S
-
Hi. It's been a couple of years since I worked with Oracle, and then only as a Systems Engineer/Administrator at a large brokerage in NYC. So I never learned how to do much of anything, short of cleaning up redundant backps and logs, when the server
-
How do I mark email as read iPhone
Just updated and now my phone says I have 3,919 unread emails. How do I get ride of that. iPhone 5