HT201210 Iphone could not be restored error (1604).

I updating ios6 but i can't itunes shown Iphone could not be restored error (1604) and i can't open the device.

It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.

Similar Messages

  • HT201210 iphone could not be restored error no 1015

    iphone could not be restored error no 1015
    massege recieved while updating
    mobile could not start

    Search!!!!!!
    http://lmgtfy.com/?q=iphone+error+1015

  • TS1470 hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

    hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

    l3az wrote:
    ... got a message the iphone could not be restored error occurred 29
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart

  • Failed iOS7 update -- then iPhone could not be restored error 27

    Hello community
    I tried to upgrade t0 iOS7 on my iphone4s via USB itunes connection. It finished downloading and then error box came up saying "iphone could not be updated
    '. then the phone was stuck on apple logo and i reset the phone and now its in recovery mode. itunes tell me to restore my phone but error box keeps on popping up with "iphone could not be restored error 27". tried everything...reinstalled itunes, disabled firewall/security and nothing's working =((((
    HALLP

    Hi.
    Ipad 3 wifi a1314 here failed while upgrading to ios 7 over wifi. After that, it is stucked on recovery mode. Itunes is latest 11.1.3 and firewall my pc is off, antivirus off and I keep on getting error 27
    What does this error mean?
    Restoring ipad software bar on itunes compleates
    verifying ipad software compleates
    but fails verifying ipad restore on error message The ipad "iPad" could not be retsored. An unknown error occurred (27)
    The status bar on the IPad device (under the logo) stucks on about 85%
    The local Ipad service that was supposed to be applec certified simply did the same and said cannot fix withough no explanation what is worng with the device.
    I am a bit dissapointed because the device is 1,5 years old only.

  • HT201210 iphone could not be restored an unknown error occurred (1644)

    iphone could not be restored an unknown error occurred (1644)

    I highly doubt you are using Snowbreeze.
    Error 2003
    Connection problem; change USB cable and check USB port.

  • HT201210 iphone could not be restored An unknown error occurred(2003)

    iphone could not be restored An unknown error occurred(2003)

    I highly doubt you are using Snowbreeze.
    Error 2003
    Connection problem; change USB cable and check USB port.

  • The iphone could not be restored error 23

    **Hello to all I have a iPhone 3gs 3.1.3 Suddenly went Network and i Switched off the devices and turn it on again prepared But not open network and mark appears cable & iTunes And worked restor but an error message appears the iphone could not be restored 23 .**
    **The iPhone still does not function with the flag whenever two devices the same problem .**
    **Please help**
    *thankss*

    Error 23 is generally a hardware failure. If under warranty, make an appointment at an Apple store or contact whoever handles warranty & support where you live. If out of warranty, google third party repair shops in your area. You will not be able to restore with a hardware failure. To confirm, try restoring on a known good computer, if you get the same error message, you have a hardware failure.

  • HT201210 Iphone could not be restored. The disk you are attempting to use is full?

    Iphone could not be restored. The disk you are attempting to use is full?

    Is your hard drive full on your computer?

  • HT201210 IPHONE COULD NOT BE RESTORED

    Dear All,
    my iPhone3G is showing the erroe message during it updation (IPHONE COULD NOT BE RESTORED )
    please help me

    Hello DeepakTeli,
    The following article has some information that may be useful in getting your iPhone working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    All the best,
    Allen

  • Iphone could not be restored error 1669

    Instead of my network provider, my iPhone displays 'Searching...'. I tried to reset through my iTunes and my phone but could not due to Find My iPhone, so I went onto Find My iPhone on my computer and erased my phone thinking it would be like a factory reset. I have tried restoring the device but everytime I try I get Error 1669 and the restoration crashes on 'Restoring iPhone's Firmware' I was just wondering what I could do to get the phone back to before I erased it. Any help would be appreciated, Thanks.

    Hello, KBAKA. 
    Thank you for visiting Apple Support Communities.
    Error 1669 can be similar to error 1.  Try the troubleshooting steps for error one as outlined below.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm yoursecurity software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Jason H.

  • Iphone could not be restored error?

    Trying to do routine update on my iPhone 4.  Then was prompted to restore my phone to original settings. Went through 3 hours of that, then an error occured saying unable to restore the phone.  Now, I can't do anything with my phone.  Tried disconnecting from iTunes and restarting both my phone and mac book pro. No luck.  Tried to get help on the apple support website, but the only options were to speak to somoeone over the phone- which can't happen right now since it's not working right now. Freaked out and phone less.

    From the support document that I provided you earlier:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • TS1424 when i try restore my iphone 3G, 8GiG, i get an error message, " iphone could not be restored, error 1015"

    hello:
    i have an ATT sim card in the phone, then i get this error message, Error 1015

    I got the same error as well, and what people say to me is that error 1015 is most likely caused when you have your phone hacked/unlocked unauthorized in other words like jail breaking or trying to downgrade or upgrade with means OTHER THAN  or not through upgrading through itunes or however appple authorized procedure

  • HT201210 iTunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then aAn unknown error occuired(1604)

    when I power on it shows go itune logo starts. Then I tried to download restore and update it shows Tunes has detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes. iphone could not be restored. Then an unknown error occuired(1604) shows.an unknown error occuired(1604). Please help me and how can I restore the phone OS. Regards

    It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.

  • The Iphone could not be restored.An unknown error occurred(1604)

    I'm trying to restore my iphone as my iphone suddenly stopped working.I just see silver colour apple symbol when i switch on then it displays usb to itues symbol. thats all..
    so when i trying to restore the iphone i get the below message.
    The Iphone could not be restored.An unknown error occurred(1604)
    i have tried from diffrent computer but i still get the same error.
    can someone help...please...thanks

    Try the following, which worked for someone else:
    Disconnected all other USB items (ext. hard drives)
    Disabled Symantec Anti Virus
    Reset the iPhone to get the screen with the lead pointing to iTunes (Hold down lock button on top)
    Plug iPhone in when this image of Lead/iTunes showing
    Start iTunes
    iTunes recognised iPhone in Recovery mode, offered to restore
    Clicked Restore, it unpacked then tried to run
    iPhone flashed then went to black screen, eventually iTunes gave the dreaded 1604 error.
    I then unplugged iPhone, but instead of resetting it again (which I've tried about 20 times already), I left it with black screen (although black, screen is definately on as not totally pitch black).
    Shut down iTunes
    Plugged phone back in (Still with black screen)
    Started iTunes, again noticed recovery mode, pressed Recover
    The black screen then popped in to life and had a small recovery icon at the bottom in the middle and the restore worked perfectly!!!

  • HT201210 My Iphone has gone in to recovery mode every time I try to recover it states a message "The iphone "iphone' could not be restored. An unknown error occurred (2001)

    My Iphone has gone in to recovery mode every time I try to recover it states a message "The iphone "iphone' could not be restored. An unknown error occurred (2001)

    http://support.apple.com/kb/ts3694#error2001
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Maybe you are looking for

  • Error while delibvering a report using FTP

    Hi I am trying to publish my report on a shared folder by using FTP server delivery. When the schedule gets run I can see following error displayed in the Publisher: java.io.IOException: Invalid status of current connection: 0      at oracle.apps.xdo

  • Applescript and automator

    I have studyed html for 3 days and wordpress for 3 days , word , excel for 5 days, and llustrator and photoshop 13 yeas ago for 6 months. and still now its so hard to understand some how. but I am in need of understading now with the printed document

  • Is there anything we need to look out for when running Forte 3.0.N.1 and iDS5.0 SP1 on WindowsXP?

    We are in the process of migrating to Windows XP and during the transition period from 95 to XP we will need to run the uncertified for XP products Forte 3.0.N.1 client runtime and the iDS5.0 SP1 admin console on XP for a time. We were just wondering

  • Problem: custom validator messages internationalized

    Hello everyone, I am trying to have a message that may be issued by a validator internationalized. Unfortunately I have no idea how to retrieve the appropriate bundleName (see comment in code below). It would be nice if someone could give me a hint h

  • Becoming a member of the Privilege Group

    People, I am using the PL/SQL packages wwsec_api and wwsec_oid to create and maintain users and groups. The problem is that I need some users to members of the "Privilege Group". This is described on the OID html interface as "Grant members full DAS