HT201210 iPhone could not be update because firmware is not compatible? Any help?
Hi! It's been months I'm trying to do the update on my iPhone 4 and it at the end gives me message:
'Your iPhone could not be update because firmware is not compatible'
I hve no clue what it means
Any help?
thanks
Just done the iTunes update and tried to update the phone again. No changed. The same MSG appear :(
Similar Messages
-
i was trying to update my iphone 3g and it display iphone could not restore. an unknow error occurred(2005) in the procces of updating the ios. please i need your help to restore back my iphone 3g. please what can i do to restore it back?
Try to restore the device in DFU mode: http://theiphonewiki.com/wiki/DFU_Mode
-
HT201210 iPhone could not be updated An unknown error occurred (3004)
iPhone could not be updated An unknown error occurred (3004)
plz help me how to fix itPlease see the More Like This section on the right.
-
HT201210 iphone could not be restored error no 1015
iphone could not be restored error no 1015
massege recieved while updating
mobile could not startSearch!!!!!!
http://lmgtfy.com/?q=iphone+error+1015 -
HT201210 Iphone could not be restored error (1604).
I updating ios6 but i can't itunes shown Iphone could not be restored error (1604) and i can't open the device.
It also happened to me. What I did was to put my USB connector at the back of my PC (the main USB port) then I open my iTunes again and Viola, it solves my problem.
-
HT201210 IPHONE COULD NOT BE RESTORED
Dear All,
my iPhone3G is showing the erroe message during it updation (IPHONE COULD NOT BE RESTORED )
please help meHello DeepakTeli,
The following article has some information that may be useful in getting your iPhone working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
All the best,
Allen -
HT201210 iphone could not be restored an unknown error occurred (1644)
iphone could not be restored an unknown error occurred (1644)
I highly doubt you are using Snowbreeze.
Error 2003
Connection problem; change USB cable and check USB port. -
HT201210 iphone could not be restored An unknown error occurred(2003)
iphone could not be restored An unknown error occurred(2003)
I highly doubt you are using Snowbreeze.
Error 2003
Connection problem; change USB cable and check USB port. -
HT201210 iphone could not be found on itunes during restore
i tried to restore my iphone 3 through itunes. once itunes tried to verify my iphone it said iphone could not be found. what does this mean and how do i get around it?
Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591
Also try:
Follow the steps in this article: http://support.apple.com/kb/ts5376 -
HT201210 Iphone could not be restored. The disk you are attempting to use is full?
Iphone could not be restored. The disk you are attempting to use is full?
Is your hard drive full on your computer?
-
Wifi wont work on my iphone 4s since i updated to iOS 6.1.3 any help available?
since i updated my phone to iOS 6.1.3 the wifi wont work and has turned a light grey colour ib the settings menu, this wont allow me to turn wifi on or off or do anything with it, is there anything i can do to fix this as its very irritating??? I have tried to reset my network settings several times but it has'nt done anything :/ i would much appreciate any help thank you
will pinker wrote:
since i updated my phone to iOS 6.1.3 the wifi wont work and has turned a light grey colour ib the settings menu, this wont allow me to turn wifi on or off or do anything with it, is there anything i can do to fix this as its very irritating??? I have tried to reset my network settings several times but it has'nt done anything :/ i would much appreciate any help thank you
I had this same issue. I spent time on live chat with Apple Support last night. I went through all of their trouble shooting. This included: making sure airplane mode is off; resetting the network settings; and finally doing a factory reset (2 times) and restoring my phone. None of these worked. The support tech told me that the "WiFi radio is not functioning" which is a hardware problem. Only thing you can do is have the phone serviced or replaced. Hopefully you are still under warranty so it doesn't cost you anything. But if not, sounds like it will be about $199 to replace, according to other posts. -
IPhone could not be any more glitchy
I cannot be the only one out here. What is going on with my 4S! Ever since the last update, my phone, my husbands and my coworkers phones SUCK! They are so glitchy. Mine so much that I want to toss the darn thing. Is this happening to everyone? If so,,,,any word on if Apple has a fix.
You can probably fix it yourself... standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.
dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you -
I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"
This often happens when iTunes is not up to date. Try updating iTunes to the latest version, then try updating your phone again.
Maybe you are looking for
-
Several people have posted questions about suppressing ithe picture-in-picture. I've just upgraded my copy of Conference Recorder and it has a checkbox for hiding the picture-in-picture. I don't think it was in the previous version. Dave
-
Outlook Calendar Sync - Possible Fix - Windows XP
So, I too had the problem where my Outlook 2003 SP2 Calendar (running on XP SP2) would not sync. I would choose the proper settings, iTunes would go through sync process and nothing would transferred. So after a few Google searches, I did the followi
-
Exception handling when invoke ejb
Hi, I call ejb like this: try { MyBeanHome beanHome = .. //jndi lookup MyBean bean = beanHome .create(); HashMap h = bean.chargeFee(data); bean.remove(); } catch ( }there are a lot exceptions: NamingException, CreationExcepti
-
Checking Links on Remote Server
Hi, I just recently got introduced to the Link Checker function on Dreamweaver. I understand how to perform link checks on local server, but am unable to do so on a remote server. I want to perform the check on the remote server because I am unable t
-
Hi I need to make changes in the approver levels, for 3 levels in the Class Enrollment process SSHR. I guess that should be possible via AME. Now my doubt is this. On the Final Level of Approval in the 3rd level after the approval is done, i would ne