HT201210 iPod Security Information Message While Trying to get Apps and Music

While trying to download an app or a song I get a iPod security information required message. After entering all information requested I get an error message; "An error occurred. We couldn't save your changes." How do I get past this? I have tried multiple times...

Since Apple says:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
It sounds like you have a hardware problem ((device may need service). Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • TS1717 What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message?   Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudde

    What does mzcommerce.credit balance mean? I can`t buy anything on the app store because I get this message?
    Read more: What does mzcommerce.credit balance error mean on itouch? - Getting this message while trying to download apps all of the sudden :

    i just received the same error.. checked everything in my account and cant find anything wrong.. i have also been getting some weird imap.gmail server not found i looked through all the boards and nothing is working.. i just recently upgraded to ios 5 and thats when the issues started

  • HT1386 Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize th

    Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone.  I have gone thur the steps for windows 7 and still nothing???  I have downloaded the newest version I itunes too. 

    Hi Midwestboy,
    If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    - Brenden

  • I have a iPad mini, I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

    I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
    Try the link above. Try to find a phone number for your country, call and ask for account security.

  • Error code 1004 keeps coming up on my iPhone 4 when trying to download apps and music through wifi

    My iPhone 4 keeps coming up with error 1004 when trying to download apps and music via wifi

    Tks heaps for that, had a look at Store and ITunes sections, not overly helpful unless I am missing something.
    My issue is that on my computer she would update her iPhone with Software updates via iTunes.
    I have gone and deleted her backups that were still sitting on there.
    If I want to update my Apps on my iPhone when due her Apple ID and password request will come up as an option to use that account if I knew the password and it's synced from my Computer even though she has been gone 7 months now. Is it a syncing issue or is her Apple ID stored in my iTunes backups somehow and keeps coming back? Do I need to de-authorize her account from my Computer?

  • TS1368 Extremely frustrated with error message when trying to download apps and updates. HELP please!

    I have been trying to download a couple of apps and keep getting the message "cannot connect to iTunes." This is nonsense because I can access both the app store and iTunes directly. I've downloaded other items today with no problem. Now all of a sudden I'm getting this error whenever I try to download an app or update an existing one. And it doesn't help that that it practically takes an act of congress to access a human being to ask a simple question. I would very much appreciate any help I can get in resolving this issue. I have already tried rebooting my iPad and my software is up to date. Haven't tried it with my iPhone yet. Thanks.

    You can't use Safari to download iPad apps. Only use iTunes/App Store.
     Cheers, Tom

  • Error message when trying to play movies and music videos

    I am getting the below message on my TV screen when i try to play movies via my iPad device through airplay. The irony of it is that I watched a whole movie before this problem developed.
    "This content requires HDCP for playback. HDCP  is not supported by your HDMI connection. This content required HDCP for playback"

    Make sure your HDMI connection is secure, try a reboot

  • Error: File does not exist (while trying to get Petstore and demos to run)

    Hi all,
    I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
    I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
    Please help me!!! I am going crazy with this.
    Thanks,
    Grant
    PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.

    I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.

  • Why am I receiving an error message while trying to change my phone number?

    So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."  I was hoping to circumvent the 15$  fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days.  Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

    Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee.  However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available.  I'm sure this will all work out for you if given some time.  Sorry. 
    So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."     

  • Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

    Article for those who hate Logic error windows
    Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
    and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
    Logic Pro:
    System Overload.
    The audio engine was not able to process all required data in time.
    (-10011)
    Error while trying to synchronize Audio and MIDI.
    Sample Rate xxxxx recognized.
    Check conflict between Logic Pro and external device.
    The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
    The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
    You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
    These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
    Here is the configuration of my computer:
    iMac12, 2
    CPU: Intel Core i5 3,1 GHz
    Memory: 4 GB
    And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
    It's sad.
    When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
    I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
    Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
    Logic immediately began to sing.

    Hi gabaghoul
    Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
    It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
    Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
    Pay attention to repetitive events in a console and events with suitable timing, not so far from error
    The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
    Message was edited by: spred

  • HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean?  And how do I work around it?

    I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
    I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

  • Error message while trying to play rented moves on Apple TV

    I keep getting an error message while trying to play my rented movies. I have rebooted the Apple TV. Lowered the resolution. Restated my modem . Rest my Apple TV. Soft rebooted it and it plays all Netflix and previews in HD no problem just not the movies I have rented !! Extremely frustrated regretting my purchase extremely!! About ready to boycott!

    I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

  • I have this message while trying to download Itunes: Service "apple mobile device" (Apple Mobile Device) fail to start. Verify that you have sufficient privileges to start system services. What this means.

    Hello.
    I received this message while trying to download itunes:
    Service 'apple movile device' fail to start. Verify that you have sufficient privileges to satrt system services.
    What this means ???? Tks

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • What do i do if i receive this message while trying to instal skype, etc 'You can't open the application "Skype.app" because it is not supported on this architecture.

    what do i do if i receive this message while trying to instal skype, etc
    You can't open the application "Skype.app" because it is not supported on this architecture. This also occur while trying to instal some other....

    Hello,
    This would indicate your trying to install a version for the Mac which require the Intel processor. (MacBook)
    You need to install Skype for PPC Mac

  • I am getting an "Error 1310 message while trying to install.  What can I do to fix this?

    I am getting an "Error 1310 message while trying to install.  What can I do to fix this?

    Error "1310: Error writing to file: C:Config.Msi..."
    Mylenium

Maybe you are looking for

  • Error while downlaoding smartform into Application server in PDF format

    Hi friends, I am downlaoding Smartform to Application server in PDF format.  getting below dump while executing   OPEN DATASET p_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT. TRANSFER i_tline TO p_filename CLOSE DATASET p_filename. if i add  " I

  • How to limit Write-Behind batch

    We have a scenario: we use read-write-backing-map-scheme having write-delay 60s. System insert a lot of data and then time comes to write data coherence find 40-50 k of unsaved record and pass them all to cachestore. Due to data volume or database bu

  • Process Orchestration in the Cloud?

    Hi all, I'd like to have a SAP NW Process Orchestration on a Cloud environment (thus: BPM + AEX). If that's not possible, it would be good to have a SAP NW BPM, still on a Cloud environment. After thorough research I found out that: Hana Cloud Integr

  • How to make block screenshot in a pdf document?

    hi everyone, i need block screenshot in a pdf document, i know block for print, for save and for copy but not the screenshot. i can do? thank you!

  • What is the "IN" operator for apex_util.ir_filter()

    I would like my Interactive Report to display on the screen an IN statement with a list of values. Is this possible to do with the apex_util.ir_filter() command within APEX version 3.2.0.00.27? Thanks Steve I know its possible for the end-user via th