HT201210 Mi ipod touch 5g tiene la pantalla negra(no se ve nada ) que hago ya restaure pero no pasa nada

me urge que puedo hacer

Google translate:
My ipod touch 5g TS1275 has black screen (can not see anything) I do and restore but nothing happens I can do I urge you
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • HT201210 Bonjours , j'ai mon ipod touch desactivé , et quand je me connecte a Itune et que je mets restaurais il me mets Erreur 1161 que faire ?

    FR : Boujours j'ai un ipod touch désactivé car j'ai perdu mon code , et quand je le branche a Itune sur mon ordinateur et que je lance la procedure de restaurations il m'affiche ' Erreur 1611 ' Aidez moi
    ENGLISH :  Hello, I have an ipod touch off because I lost my code specified safety.
    and when I plug it maffiche Itune error 1611
    Help me

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.

  • Tengo el iPod touch primera generacion y no puedo descargar musica de iTunes, que debo hacer??

    Tengo el iPod touch primera generacion y no puedo descargar musica de iTunes, que debo hacer?? 

    Please speak English an this is an English Speaking Forum.

  • HT201210 my ipod touch shows a usb with arrow pointing to an I tunes Simble.  I can't get it to do anything.  Any one know what to do?

    Can any one help me.  my Ipod touch will not respond when I plug it in to my new computer.  My old computer crashed and I
    am using a new computer.  When I plug it in or not it reads on screen a picture of a usb plug and a arrow pointing to a a simble
    I tunes.  Can anyone tell me how to fix it.  I tryed following the instructions on i tunes with no luck.  thanks

    Did you try restoring the device? That is usually what that iTunes icon and the USB cable message means and what it is telling you to do ... connect to iTunes on your computer.

  • HT201210 my ipod touch is in recovery mode and wont restore?

    my ipod touch 3rd generation 8gb is in recovery mode. it has been charging but nothing has happened and i am unable to turn it on.i connected it to itunes and was told it needs to be restored. i tried this but it said that the software for this is currently unavailable. i updated itunes and tried again but the same happened.
    does anyone know what to do?

    - Try deleting the downloaded firmware file and try restoring again. A new file will be downloaded. It is located here:
    IPSW file location for Mac and Windows
    - Try placing the iPod in DFU made and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT201210 my iPod  touch is stuck in recovery mode- it shows the plug and the disk.. please help me to fix this

    my ipod touch is stuck in recovery mode... how do i fix this.. my itunes has the latest version

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201210 My Ipod-touch was ios5 when I bought. You recommend to upgrade ios6, because set-up icon always shows me "+".  For that on facebook I can't see wall photos. So I want my ipod touch to be back as initial version ios5. How can I do? please tell me.

    My Ipod-touch was ios5 when I bought. You recommend to upgrade ios6, because set-up icon always shows me "+".  For that on facebook I can't see wall photos. So I want my ipod touch to be back as initial version ios5. How can I do? please tell me.

    Unfortunately, I don't think it solved the problem. I believed the new iPod thing solved the weird behavior problem, but after that the button stopped working.
    Do you know how to contact Genius? Because I don't think I can find a store in my area, when I tried to.

  • HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

    My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

    iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

  • HT201210 bloqued ipod touch , 8 Gb . Wrong code . what do i do ?

    Bonjour , je ne me souviens plus de mon code de verouillage ipod touch ( par chiffres ) je ne sais pas quoi faire ?

    For a forgotten screen-lock passcode, connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.
    Also see:
    iOS: Wrong passcode results in red disabled screen

  • HT201210 mi ipod touch no funciona

    hola, mi ipod touch no funciona y me pide que lo conecta al itunes, cuando lo conecto al itunes me dice que lo actualice y lo restaure y le doy a aceptar, al cabo de un tiempo me dice que hay un error y no me deja hacerlo. ¿Que hago?, por favor responderme a mi correo, que es: [email protected]

    Google tanslate:
    hello, my ipod touch is not working and asks me to connect to itunes, when I connect to itunes tells me to update and restore it and give it to accept, after a while I said that there is an error and will not let me to. What do I do?, Please answer to my email, which is: [email protected]
    What is the exact wording of the error message?
    Update and restore alert messages on iPhone, iPad, and iPod touch.

  • HT201210 My ipod touch won't update to iOS 6, it says unknown problem occured

    My ipod touch is the 4th gen and currently has iOS 5 installed on it. It has 10 GB of free space
    Please answer ASAP

    You can try a reset.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Otherwise yo will have to update via iTunes on a computer. Other uses have had to do that.
    -   fyou update on other than your syncing computer/iTunes library following these instructions. When you restore the iPod it will also be updated.

  • HT201210 My iPod touch does not respond, I tried to restore it from itunes but it did not work, itunes recognize it but the restore process seems to do nothing

    my iPod touch does not respond, I'm trying to restore from itunes but it does not work

    What exactly happens when yu ty to restore?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201210 restore ipod touch 3g

    I cannot restore my ipod touch 3 G, it gives me an error (28)+

    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Mi ipod touch no carga y el pc no lo reconoce creo que es un mal jailbraick

    Mi ipod touch de un momento a otro aparecio como descargado, lo conectaba a la pared y nada ala pc y nada aparece la pila en rojo con el rayito, hace unos dias le trate de reiniciar y encendio y la pila aparecio ncasi llena y a los pocos minutos se volvio a apagar quedeando igual creo que es un jailbreack mal hecho o algo asi porfdavor que debo hacer

    Sorry, but if you have jailbroken your iPod, you will have to look elsewhere for assistance. We cannot help with jailbroken Apple devices in these forums.
    Regards.

  • Tengo un ipod touch 2g MC, y necesito descargar facebook y otras aplicaciones que me piden ios 4.3 que puedo hacer?

    tengo un ipod touch 2g MC, necesito descargar facebook y otras aplicaciones que me piden ios 4.3 que puedo hacer?

    Hello lllass,
    Apart from the fact Apple is clearly trying to force me to buy a new iPod, could you explain how that can possibly be done???
    I have used the appstore with my iPod Touch to update to the newest version, wich NEVER WAS signaled as incompatible with my model. Now I cannot use, for example, Facebook, iBooks, Airvideo (wich I paid for, )...
    Because you can have more than one device so iTunes does not check if the update is compatible with a particular model device.iOS that you have. The only way is to look at the Requirements section of each update and make sure the update is compatible with your device and iOS
    I have used iTunes to restore from a security backup, BUT it looks as if iTunes continues to search the newest version of the apps it has in its folder, rather than the one that "should be" in the backup of the iPod.
    Correct. You can only have one copy/version in your iTunes library.
    Is there really a copy of the older apps included in the backups, or not??
    The backup does not include the apps themselves. For what is included in a backup see:
    iTunes: About iOS backups
    You see, this isn't really nice for users, though a good commercial strategy from Apple.
    I have contacted Apple iTunes Support, but all I've got is 3 credits for video in the store...
    I dont want video, I want back ALL THE FUNCTIONALITY I BOUGHT MY DEVICE FOR.
    As said before, unless you have a copy of the previous version like in the computer recycle bin/trash or in a computer file backup yo are out of luck

Maybe you are looking for

  • Need help with audiodrivers.

    Got a Hp Nettle 2 motherboard in my pc from a a6210.sc  i need drivers for audio to windows 7 64bit. i have tryed to install and it says reboot and then it dosent show up in device manager. got an error trying to manually add it in device manager in

  • Aperture not working with OS 10.6.7

    Hi, I had to restore my Macbook Pro from time machine due to disc corruption issues. Now Aperture 3 is no longer starting and the error message states that the software is not compatible with the OS system. Have downloaded the aperture programme agai

  • How to display db content in my portlet?

    Hi, Can someone tell me how I can write a simple portlet to display some data in 816? I only need a very simple example to get me going. Probably something like the result of "select * from emp;" from scott schema. I can write the Hello World protlet

  • Downloading from cd confirming window does not open

    when trying to import cds window to confirm does not open

  • Problem in getting a session object  from FacesContext into a Servlet

    Hi, I am new to JSF. I had a session bean and I want to get the instance of the session bean in a servlet. I wrote the below code to get the bean object, but some times it is failing and giving NullPointer Exception. Can anyone send the code which wo