HT201210 my error code is 20001

I was trying to upgrade to iOS on my iPad2 and got 20001 error.

Hey Gyan1505,
Thanks for the question. I understand you are receiving error 20001 when attempting to update your iPad 2. The following article outlines this error message:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Error 20000-20008: This error may indicate that you have a USB communication failure due to a damaged USB 30-pin Dock Connector cable, out-of-date USB device drivers or firmware, or that other USB devices connected to your computer are interfering with iTunes communicating to the iOS device. Try restarting the PC and testing again with a different USB port. If you are using a custom Windows Theme Pack, revert to the default theme pack, restart, and try to restore.
Thanks,
Matt M.

Similar Messages

  • HT201210 3198 error code?

    I tired to restore my ipod touch in 'soft DFU mode' and an error code (3198) came up...

    http://support.apple.com/kb/TS3694#error4000

  • HT201210 fix error code 1669

    Facing problem with my iphone 5, error code 1669 apear while restore firmware via itunes....
    any solutions?

    Hi, anjoucreek. 
    Thank you for visiting Apple Support Communities. 
    Error 1669 can be similar to error 1.  Try the troubleshooting steps for error one as outlined below.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm yoursecurity software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Jason H.

  • HT201210 2006 ERROR CODE RESOLUTION PLEASE

    iphone died 2 days ago - have gone through various steps that allow me to 'restore my phone) - it was fairly soon after fairly soon after ios 6 update and then updated imac (10.8.2) and itunes to latest versions - phone requesting usb connection to itunes but when detection of iphone by itunes as being in recovery mode occurs and seems that recovery download is happening the phone turns off and then requests connection to itunes again error messages 2006 or 2001 - gone to 02/wifi/3g carrier - (get a 'guru' who has taken me through same soft steps as per apple site resets and am getting nowhere - Heeeeeeelllppp please.

    Check this support document http://support.apple.com/kb/ts1275 for information on restore error codes. This is the information on the error code 2001-2006
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • HT201210 Unknown error code (1)

    My itunes gave me unkown error (1) and stopped the download of iOS7 now i can't get to my phone because it's stuck in recovery mode

    Either this iPhone has previously been hacked, rolled back, used an unauthorized beta, or was jailbroken or you have experienced a hardware failure.

  • HT201210 itunes error code 42408 ??

    I am having trouble with itunes cant get it to open gives me an error 42408  and no other options  I am afraid to unisntall it and loose all my music.

    I believe it's some kind of software conflict, you should be able to resolve it by downloading the latest version of iTunes here: http://support.apple.com/downloads/#itunes Hope that helps. Also do you backup your computer using time machine? You should regularly backup your computer & music. Rather than remove iTunes, try updating to the latest version.

  • HT201210 2001 Error code

    I am getting an "iphone could n ot be restored. An unknown error occurred (2001). Can anyone help?
    Thanks.

    http://support.apple.com/kb/TS3694#error2001

  • HT201210 -1 error code

    When trying to restore my Iphone 3gs i am getting this error message " an unknow error occurred (-1)

    hardware failure take it to the apple store.  OR you can do a search in the forum to find out more

  • HT201210 1644 error code

    hi all i am trying to restore my ipad but i get the above error... any ideas?

    Some of these folk have:
    iTunes error 1644

  • HT201210 0xE error code

    I am taking an Iphone 3GS that I no longer have service for and turning it to an ipod for my daughter.  the phone or ipod is no longer recognized in itunes so it is not updating.  I went through all the different things recommended by apple to fix the problem but still nothing.  I know when I plug the phone into my computer itunes finds it because im getting a message that itunes has found an iphone but doesn't go on from there to sync or anything else.

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS3221
    Regards.

  • Call to WPG_SESSION API Failed. Error-Code:20001

    Here is the error I am getting while accessing portal. This error comes 2 out of 5 times.:
    Call to WPG_SESSION API Failed.
    Error-Code:20001
    Error TimeStamp:Fri, 23 Mar 2001 17:28:33 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.

    The error code implies an invalid cookie. This could be because the encryption key is invalid or the format of the cookie is corrupted. If the encryption key was invalid, the error would happen all of the time rather than 2 times out of 5. The only way I can see that the cookie format would be bad is if it got truncated. There is a 4K limit on the size of the buffer that passes cookies around, so it could be that the browser is sending more than 4k worth of cookies. However, if this were the case, then the error would be consistent from that browser after you exceeded the limit. Can you give a little more detail on exactly what you are doing when the error occurs?

  • HT201210 cannot complete rebooting of my iphone 5 due to error code 9

    cannot complete rebooting of my iphone 5 due to error code 9....plz help

    Hello don muchie,
    The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • HT201210 what is - can not restore ipad due to error code 2006

    trying to figure out what error code 2006 is - it is not one listed and I can't restore my ipad to factory settings

    It is listed, you just sort have to play around on the support site in order to find it.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • HT201210 Getting an error code (code 50 I think)when trying to sych my updated iPhone 5s to updated iTunes.

    Getting error code when synching with iTunes. Never had a problem before updating iOS and my Mac.

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes

  • HT201210 what is error code 1

    I have tried to restore my Iphone 4 and its gets the the point of restoring firmware 3/4 of the way through completion it gives an error of unable to complete, error code 1.  what is going on with the phone?

    From http://support.apple.com/kb/TS3694:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Maybe you are looking for

  • New itunes library

    ok, i have had my ipod touch for about a year and a half now and i have jus been using my parents desktop computer for itunes. Now i have gotten a new laptop and want to use it as my default library if you know what i mean. How can I transfer all my

  • Virtual Copies search and export...

    Hi, The underscores I'm using in my filenames seems to be messing up the sort order. So I want to replace the underscores with dashes. LR can't do this in its rename utility, afaik. If I do this externally, then I need to re-associate the images in L

  • Problem with Dreamweaver cs4 tutorial

    Hi I have been following the dreamweaver tutorial (go to http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt4.html) All been well up until adding main image text. It looks fine in design view (see snapshot attached) but when I go to

  • Financial Reports error

    Hi xperts, We just installed Financial Reports and webanalsis on the same server. I am able to connect to essbase properly with webabalysis, but the problem is with Financial reporting. I am able to login in to reports but when I am creating a new re

  • How to write export dump commad with no datable data only table structure.

    How to write export dump commad with no datable data only table structure will there and command for hole schma. e.g. export dump command for scott schema and all table within scott schema in it no table data should be exported.