HT201210 my iphone is in recovery mode but wont let itunes recover it as it says it comes up with error. i have tried the power and home button for 10 seconds but it will still not do anything.. the serial number says n/a does this mean anything as well?
do i have to buy a new iphone?
I have the same problem but mine won't even give me the error number, and it doesn't appear as a device on iTunes
Similar Messages
-
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
My Ipod will not turn on. I held down the power and home button for several seconds, and the apple sign shows up. Itunes doesn't even recognize my Ipod. HELP!!!!
How do I restore my Ipod when Itunes doesn't even recognize it???
I don't care even if I loose all my songs and apps, I just want me Ipod to work again!!!
PLEASE HELP!!!! THANKS IN ADVANCEI ended up on this link, which related to my problem:
http://support.apple.com/kb/ht1808
When I got to step #3 (While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.) my Ipod would not turn on, and Itunes did not recognize my Ipod. :S -
My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.
You can try to reboot a few more times. If it doesn't come back and you normally sync to a computer, hook it up and see if the 'guts' are working even if the screen isn't.
Beyond that you should make an appointment at your local apple store and have them check it out. -
Im looking for someone to help me out with my Ipod.
Plug your iPod into your computer go to the iPod summary tab:,
Then click restore:
Hope this helps.
It should fix the problem,
but it takes about 30 minutes.
You will have to sync your media back to your iPod. -
how do i fix it?
What was the exact wording of the error message? Usually a number or other information is provided in addition to just saying unknown error.
-
i really need help here. I have only used my iphone for a month. my iphone won't switch on. it died of a low battery and i've already fully charged it and usually before it even fully charged, it will turn back on right but in my case nothing happened. i've tried holding the power and home button for 30 seconds and up to 2-3 minutes but no logo appear. it went straight to recovery mode. there's nothing wrong with my cable, i checked with itunes and this happened once a week ago but it did switch back on after i tried a few times but now it just won't switch on. i also have problems with my screen as there's some noises to the screen (i hope you get me) and when i turned the camera on, it was as if the whole screen is shaking. i'm currently studying in the middle east and there's no apple store here so i cannot use my warranty. i will only be back home in summer. please help me what should i do to at least switch my iphone on first.
I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think. -
So I've done the whole hold the power and home button, it resets but still stays frozen on the black screen with the apple icon
Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
Does it work with headphones plugged in? If yes, did you try to play music in headphone mode, then unplug during playback and start playing music again after that?
If you toggle the volume, can you see the slider moving up or down? -
My iPhone went black and the hold the power and home button solution will not work
My iPhone went black and the hold the power and home button solution will not work
Make sure it's charged.
Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first). -
My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
One day I was going to download music from my laptop to my ipod, I was able to download all the songs I wanted but later when I try to charger my ipod it wouldn't let me. The next day I bought a new charger but it still didn't charger. I try pressing the power And home button at the same time but it still wouldn't turn on or charger.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hİ
My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is 100%.
If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help
Have you restored the iphone through itunes?
You say the unread messages aren't there but then they appear? -
My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue
i have the same problem...my ipod is 4th generation?uggghhhhh
Maybe you are looking for
-
Color Wont Open when I "Send to" sequence into it....
Just receive FCPS 2 and I started on a project, after I finished my sequence I tried to "send to" > Color and what color does is just opens for a fraction of a second then closes. I quit and restarted all my applications and computer and open color b
-
Copy Master Datas in FICo from 1 Company Code to Another --- Very Urgent
Hi Peers I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have s
-
How to include the value of the discount in the stock value ?
Hi Friends; Is it possible to include the value of the discount (SKTO price condition) in the value of the stock when receiving a purchase order with MIGO How can I accomplish this? Best regards
-
When attempting to convert PDF to DOCX, the error message was exactly as follows: "There was a problem logging in. Try again?" with a "Yes" and a "No" button. Clicking "Yes" give the same message, "No" aborts the process.
-
Create a Report Instance with the SDK?
Is there a way to save a previously refreshed report containing data as an instance of that report using the SDK? In other words, the report containing data would appear in the History list. Or is scheduling the only way to create an instance?