HT201210 my iphone is locked when i restore my iphone?how it is solve the problem?

my iphone is locked when i restore my iphone.how i do unlock my iphone.plz  give me the solution.

If you mean that you restored your iPhone and it is now locked to
a wireless carrier other than the one you were using, that happens
when an iPhone is hacked/modified/jailbroken. Contact the carrier
to which the iPhone is currently locked to see if they offer unlocking
and if you qualify.
Be advised that the process used to modify/hack the iPhone may have
rendered the iPhone incapable of being legitimately unlocked and even
useable.
Where did you get this iPhone? What does it say when you look at
Settings=>General=>Carrier?
If that is not what you mean, post back with more details so someone
can offer assistance.

Similar Messages

  • HT1766 Is there anyway to restore all photos, apps, etc onto an iPad using the most recent iCloud back up from an iPhone? I did a backup on my iPhone today but when I restored my iPad using that backup, only the photos in the photostream transferred to th

    Is there anyway to restore all photos, apps, etc onto an iPad using the most recent iCloud back up from an iPhone? I did a backup on my iPhone today but when I restored my iPad using that backup, only the photos in the photostream transferred to the iPad?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on th

    I have created a Blog in iWeb and uploaded it to an FTP server.   It works fine, except that the 'Comments' facility is missing.   When I upload the blog to MobileMe   the 'Comments' facility is there and working great.   How can I solve the problem on the FTP server Blog.

    You haven't a problem. You simply did not read the iWeb Help :

  • I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

    I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

    hi,
    I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
    pls help me out.....
    Rashi

  • I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

    I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

    This tech note addresses your problem: iOS: Deactivating iMessage

  • Disk drive goes to 100% busy when starting Elements...How do I fix the problem?

    I've been successfull running elements for the past few years.  Now, the drive goes to 100% and locks up the computer.  Elements seems to start-up, but the drive crashes the system.  Cannot use Elements 11 at this time.  How do I fix the problem?

    If you've been using the program successfully for years and suddenly your drive is crashing, I'd first check the drive itself. They do go bad after a couple of years.
    I'd also run a registry cleaner, Disk Cleanup, a Disk Defragmenter and maybe even a good virus scan.
    YOu don't say which version of Premiere Elements you're using, what operating system you're on or how old your computer is, but computer's do need regular maintenance and hardware sometimes needs to be replaced.

  • HT201210 when i want to restre the iphone so i can see an error 3194 how i can solve this problem

    i am trying to restore the iphone through itunes and i can an error which is 3194 so how i can solve this problem

    Check Hosts file of comp. It must point to Apple.
    Would have already seen
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Just got my iphone 5s and tried to restore backup from my iphone 4.  When I restored it, it automatically went back to the backup from 2013

    Never gave me an option to restore from the backup I did last night.  Now I want to restart and just start over from the settings I had when I purchased it this afternoon. The old backup looks outdated and only transferred over certain info, no apps. Please help!!!

    There is no other backup listed though. That's the problem. The only one I can choose from is from last year when I am a thousand percent confident I backed it up the other night.  Not only did I do it through itunes, but I also backed it up via the icloud.
    Other than keeping my contacts, I don't care about losing what is on the backup from last year if I can't restore it to something sooner. I would rather have the settings it came with when I purchased the phone yesterday.

  • How can I solve the problem of panic.ips in my iphone 5?

    Hi to all. I'm new on this kind of communities. I've updated my Iphone 5 to IOS 7.1.1, my problem is that since a did this updated mi iphone began to restart automatically no matter wich aplication im working.
    I've revised the use diagnostice and it shows a text about panic.ips.  Somebody can help me to know if this is a hardware problem or software problem and if it can be solve?
    Thank you.

    Hi Odragde,
    Thanks for visiting Apple Support Communities.
    If your iPhone is restarting unexpectedly after updating the iOS software, start with step 5 in this troubleshooting guide:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • I duplicated a picture and now iPhoto (11) is cloning that picture replacing all the other photos and only when I click directly on them I can see the real picture! How can I solve the problem without losing any saved picture? Shall I re-install? Thanx

    I duplicated a picture selecting CMD and D but, suddenly, iPhoto (latest version '11) started cloning that picture and replacing all the other photos with it.
    Only when I click directly on one photo I can open it and see the real picture it is.
    But the preview is always the duplicated one...
    I tryed to duplicate another picture just to see if it turned out ok but the only changement was the duplicated picture!
    I started repeating the second duplicated one instead of the previous one but my issue remained the same.
    So, how can you help me to solve this problem without losing any saved picture?
    Shall I re-install iPhoto completely?
    Thank you very very much in advance!!

    As Larry says, restoring the back up is the fastest and best solution. Otherwise:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • How do i solve the problem of access denied when i open "my pictures"?

    I have a h8-1234 with Windows 7pro computer. When I try to access My Pictures, I get ACCESS DENIED. How do I solve this?

    Hi
    Please find the link given below might help you to fix the issue.
    http://support.microsoft.com/kb/2623670
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/unable-to-open-folders-error-access...
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • How can i solve the Problem, that our iCloud combines several iPhone Numbers. All SMS get confused by the changing of numbers

    We have several iPhones and we are just using one iCloud and appleID.
    But since the update of iOS 6 we are confused.
    E.g. My mother sends a SMS to me, but my sister received it. She is confused and is texting back to My mom. But that time I get that text message.
    Even if I send a SMS to a friend, my friend receives it from my sisters account.
    Please help, cause we are so confused

    icloud is designed so that only one user uses it to keep his/her devices in sync.  Problems such as yours occur when multiple users use the same account - icloud is not designed for that.
    If someone has another icloud account, and wants to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  This only disconnects the device from that account, no data is lost on icloud.  Then enter the account ID that you want to use.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • HT4623 hi after updating my Ipad I added a pass word I could not remember it,it is locked now showing ipad is disabled how can I solve this problem

    how can I reset my pass word??I can not remember it

    Hello salahelbakry
    The only option is to put your iPad into recovery mode and then use iTunes to restore it. If you have a back up in iTunes or iCloud, you can put the at backup back on and it will not bring the passcode back unless it is encrypted.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Regards,
    -Norm G.

  • How do i solve the problem "itunes library.itl" when downloading Itunes for windows7?

    i tried to install itunes on my Pc but i always get an error message" itunes library.itl cannot be read because it was created by a newer version of itunes" how do i troubleshoot this problem?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • HT201210 When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware

    When I Restore My iPhone with itunes gives error -1 will end of the Installing  firmware
    what is the problem ?

    Error -1 generally indicates a catastrophic hardware failure. 
    You'll need to bring your phone to Apple for evaluation

Maybe you are looking for

  • Time Machine, Migration Assistant, and a BIG headache

    Set up my new rMBP from a time machine backup on external and worked great. I removed some applications from the dock that didn't transfer over successfully (i.e. Word 2004). I didn't include iTunes during the transfer.  Once time machine restore was

  • Iweb and using mobileme password protected photo gallery

    I am trying to create a website. How can I access a password protected photo gallery by using MobileMe gallery widget in iweb. I need this capability. The unprotected galleries display using the MobileMe widget. Any suggestions?

  • Lookup() in ui tree from fxml and lookup from java built tree

    Hi, when I try to find a control by its id I use the lookup()-Method. If I load the ui tree from fxml, I have to call something like root.lookup("#theControlId"). If I built the ui tree in java I can use look("theControlId"). Is this right? I am a li

  • How to include optional NI-Device installation in my installer

    I have a Wise installation script. How do I offer customers the option of installing NI-Device? I could make a C++ program and run it, but don't know how it would work. I see a file named SilentInstall.txt on the NI-Device 1.5 disk, but it just looks

  • How to display employee photo in pdf through WebDynpro OR ABAP print Progr?

    hi, I have uploaded employee photos using TCODE OAOH. Now all the employee photos are stored in Archive link. Now my requirement is i have get the employee photo and display it in PDF using PDF forms and  webdynpro OR using ABAP print program. I am a