HT201210 my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore

my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore

any specific error messages? If so, check out http://support.apple.com/kb/ts3694 for solutions
if not, force restore: http://support.apple.com/kb/ht1808
NB: make sure you have a backup, because following the last article will remove all data/content on the device.
Good luck

Similar Messages

HT4061 my iphones lock button is broken, and the screen is not cracked but all the settings are set off to the side and i cant type ion my passcode to get into the phone and i cant get into the phone to reset it

I have the iphone 5
my lock button is broken
my screen is off set and i cannot type in my password to get into the phone and reset the phone
how or what do i have to do to fix this?
and im at work so i cant get the serial number to you

my lock button is broken
If your lock button is broken, the only solution is to get the phone replaced or repaired. There is no way to reset the phone without a functioning lock button.
and im at work so i cant get the serial number to you
This is a user to user tech support form, not Apple support. The S/N wouldn't provide any solution regardless.

HT1766 my phone was in the middle of updating on iTunes and got disconnected and now it reset the phone but i cant get it to activate how do i fix this???

my phone was in the middle of updating to ios7 on itunes and got disconnected and now its stuck on activation what do i do to move it along?

http://support.apple.com/kb/HT1808

HT1296 i gave my iphone 5 to fix, my screen was broken, now i got it back but i cant use it cuz its disabled and ive tried to open it thru itunes and zero results.it just tells me that i have to enter password on the phone but i cant cuz its blocked

i need some help, im trying to get my iphone open but nothing seems to work, my itunes just asking me to enter passcode on the phone and i cant and it doesnt let me do it on itunes so im stuck.

Try this: place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID.

I created a new ID for my Iphone, because the old ID was an email address I no longer have. Also, the phone wouldn't recognize the password I have always used. Now the problem is when I try to update my apps, it automatically wants to use the old ID. I've set the new ID for the phone, but it defaults to the old one when asking for a password to update apps.

That's because all apps are forever tied to the Apple ID used to obtain them, & can only be updated using that ID.
To use your new ID with these apps, you'll have to delete them, then repurchase. Or, contact iTunes support, explain the situation, & ask that they add these apps to the download queue of your new ID.

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to error 3

My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.

Hi, Milanista5
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Parent members not being updated when running AGG

I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
Here are the details of the script
SET MSG SUMMARY;
SET FRMLBOTTOMUP ON;
SET CALCPARALLEL 4;
FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
(SpaceType,0),@LEVMBRS(CostCenters,0))
CALC DIM (ManagedBU,AllocatedBU);
ENDFIX
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
@LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
"$1";
ENDFIX
/* Aggregating numbers for the report so it could be viewed n a top cost center level */
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
CALC DIM(COstCenters,SpaceTYpe);
ENDFIX
/* Aggregating numbers for the report so it could be viewed in a top regional level*/
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
@IANCESTORS("$1");
ENDFIX

yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Discount is being updated when changing unit price in SO after upgrade

Hi there,
Customer recently upgraded to version 8.8 from 2005.
They encountered a few transactions where discount is automatically being updated when changing unit price in SO.
Customer created SO by duplicating existing SO. Then change the Unit Price in the new SO.
For one item, the price after discount does not get updated correctly. Instead, system seems to have automatically created the discount.
So far, I can't reproduce this issue yet.
Is this a bug? Please suggest.
Thanks,
Yadana

Thanks for the replies.
I have checked and there is no discount setup for the Price List or BP.
The Price List has been set to the correct one as well.
Please advise.
Thanks,
Yadana

HT1414 i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.

See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808

HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]

Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device

HT5163 i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do

i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do i get back to unlocking the iphone and using it as an ipod again.
thanks

iPhones require a SIM card for activation, regardless of whether it is being used as an iPhone or an iPod.
Put a SIM in the device for the carrier it is locked to and activate it. The SIM can then be left it it or removed.

My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!

My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
& it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.

Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!!

HT201210 my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore

Similar Messages

Maybe you are looking for